Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40, 3 x 36 in length. 90 deg angle. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

Made of a highly durable plastic (PVC) compound making the product non-metallic and safe to install. Elbow is non-corrosive, rust-proof and easily pliable. Good for those applications that requires change of direction. UL listed.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. 1/2 in to 3/4 in non-metallic access pull elbow with reducer bushings.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

Made of a highly durable plastic (PVC) compound making the product non-metallic and safe to install. Elbow is non-corrosive, rust-proof and easily pliable. Good for those applications that requires change of direction. UL listed.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.

Four knock-out type socket openings, 90 deg spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode.

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

Made of a highly durable plastic (PVC) compound making the product non-metallic and safe to install. Elbow is non-corrosive, rust-proof and easily pliable. Good for those applications that requires change of direction. UL listed.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL listed.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL listed.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL listed.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL listed.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL listed.

Carlon Terminal Adapter, 2-1/2 in Trade, Male Connection, PVC, Suitable for: SCH 40 and 80 Rigid/Non-Metallic Conduits

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.

Carlon Standard Coupling, 2-1/2 in Trade, PVC, Gray, 3-3/16 in Length, 2.688 in ID x 3.3125 in OD Diameter, Includes: (7) Standard Couplings

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.

For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.

For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.

Non-conductive. Will not rust or corrode.

Carlon Conduit Offset, PVC, Brown, Suitable for: S42 Power Plug

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.

Carlon Conduit Adapter, 2 in Trade, Male Connection, PVC, Gray, 2.09 in Length, 2.71 in Diameter, Suitable for: SCH 40 and 80 Conduits

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.

Carlon Conduit Adapter, 1 in Trade, Female Connection, PVC, Gray, 1-15/16 in Length, 1-5/8 in Diameter, Suitable for: SCH 40 and 80 Conduits

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.

Carlon Conduit Adapter, 1/2 in Trade, Female Connection, PVC, Gray, 1-9/16 in Length, 1-7/64 in Diameter, Suitable for: SCH 40 and 80 Conduits, Includes: (30) Female Adapters

Carlon Standard Coupling, 2 in Trade, PVC, Gray, 2-1/2 in Length, 2.19 in ID x 2.734 in OD Diameter, Suitable for: SCH 40 and 80 Conduits

Carlon Standard Coupling, 1-1/2 in Trade, PVC, Gray, 2-3/8 in Length, 1.755 in ID x 2.2344 in OD Diameter, Suitable for: SCH 40 and 80 Conduits

Safe, non-conductive. SCH 40 non-metallic socket type coupling for joining SCH 40 non-metallic conduit. Will not rust or corrode. RoHS compliance, UL listed.

Safe, non-conductive. SCH 40 non-metallic socket type coupling for joining SCH 40 non-metallic conduit. Will not rust or corrode. RoHS compliance, UL listed.

Carlon Conduit Coupling, 3/4 in Trade, Socket Connection, PVC

Carlon Conduit Coupling, 1/2 in Trade, PVC

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.

Carlon Conduit Body, LB, 1-1/2 in Hub, 32 cu-in, PVC, Gray, 6-13/32 in Overall Length, 2-1/2 in Overall Width, Suitable for: SCH 40, 80 Conduits, Includes: Foam-in-Place Gasket

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL listed, RoHS Compliance.

Carlon Conduit Body, LB, 1 in Hub, 12 cu-in, PVC, Gray, 5-9/32 in Overall Length, 1-3/4 in Overall Width, Suitable for: SCH 40, 80 Conduits, Includes: Foam-in-Place Gasket

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.

CANTEX 5133827 is a 1-1/2 in 90 deg plain end SCH 40 standard radius elbow used to change the direction of a conduit run by 90 deg.

CANTEX 5133826 is a 1-1/4 in 90 deg plain end SCH 40 standard radius elbow used to change the direction of a conduit run by 90 deg.

Elbow, 1 in Trade, 90 deg Angle, SCH 80 Schedule, PVC, Dimensions: 1.316 in OD, Plain End Connection, Gray, Suitable for: Non-Metallic Solvent Weld Fitting

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.

Elbow, 1/2 in Trade, 90 deg Angle, SCH 80 Schedule, PVC, Dimensions: 0.844 in OD, Plain End Connection, Gray, Suitable for: Non-Metallic Solvent Weld Fitting

Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included.

Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.

Carlon Conduit Adapter, PVC, 29/32 in L, 1.05 in Dia

Carlon Conduit Adapter, PVC, 27/32 in L, 0.84 in Dia

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.