Finally a tank-to-bowl gasket and hardware system designed to fit most any 2 in flush valve toilet. The Fluidmaster 2602G-008 universal tank-to-bowl gasket system eliminates the guesswork when replacing your toilet tank-to-bowl gasket and hardware. Stop leaks at a common leak point, the tank-to-bowl connection and save water fast. This innovative design features two different toilet gaskets, three steel boles and hardware for everything needed to secure and seal your tank-to-bowl. Use just the red gasket for most standard 2 in flush valve toilets, use the black gasket for Kohler specific 2 in flush valve model toilet and combine both to fit Gerber specific 2 in flush valve model toilets. Simple and easy instructions are included for a quick and simple solution to your leaky toilet. Built durable from high-quality sponge rubber (red gasket), highly flexible rubber (black gasket) and stainless steel (bolts). Trust Fluidmaster for proven toilet repair parts.

The Fits Mansfield tank to bowl gasket and hardware kit is designed to fit all 2 in, two-piece Mansfield toilets. The included hardware is stainless steel to ensure a long, corrosion-resistant life. Easy-to-install, the 453BP tank to bowl gasket repair kit includes tank to bowl gasket, three stainless steel bolts, washers and nuts and three rubber washers.

Repair your leaky toilet with the Danco spud gasket for Kohler. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.

Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts, rubber spud gasket and washers. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.

Help prevent leaks from occurring between your toilet tank and bowl with this tank-to-bowl kit. This 15-piece kit includes 2 brass-plated galvanized steel bolts, a rubber gasket and washers. Stopping the leak saves water, energy and money.

Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts and a sponge rubber spud gasket. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.

The Tank-to-bowl Kit for Mansfield is an economical solution for a leaky toilet tank. The kit includes a rubber gasket, bolts, washers and nuts required for assembly. The kit works with Mansfield's Alto toilets with 2 in flush valves as well as many other models with a 2 in flush valve.

Repair your leaky toilet with the Danco spud gasket for Mansfield toilets. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.

Repair your leaky toilet with the Danco spud gasket for Mansfield toilets. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.

Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts and a sponge rubber spud gasket. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.

Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts, a sponge rubber spud gasket and a round shaped gasket. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.

Repair your leaky toilet with the Danco spud gasket for American Standard toilets. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.

Repair your leaky toilet with the Danco spud gasket for Gerber toilets. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.

Repairing your worn out flush valve parts can save water and money. This repair kit will replace parts for most American Standard toilets. These parts are made of durable rubber to provide reliable performance.

Repair your leaky toilet with the Danco spud gasket. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.

Brass locknut, rubber washer.

Brass locknut, rubber washer.

The 2 in tank to bowl gasket and hardware kit is universal to fit most 2 in 2-Piece toilet tanks. This toilet tank part uses universal sponge rubber design measures 2-1/8 in ID, 3-1/2 in OD and 1-1/4 in thick.

The 2 in tank to bowl gasket is universal to fit most 2 in 2-Piece toilet tanks. The universal sponge rubber design measures 2-1/8 in ID, 3-1/2 in outer diameter and 1-1/4 in thick. Easy to install, the 463 toilet parts.

The Large 3 in and 4 in tank to bowl gasket and hardware kit is designed to fit specific toilet models that were made after 2000. The universal sponge rubber design measures 3 in inner diameter, 4-1/4 in OD and 1-1/8 in thick. The included hardware is stainless steel to ensure a long, corrosion-resistant life.

The large 3 in and 4 in tank to bowl gasket is designed to fit specific toilet models that were made after 2000. The universal sponge rubber design measures:,3 in inner diameter, 4-1/4 in OD and 1-1/8 in thick.

This secures and seals the toilet tank to the bowl. Fluidmaster bolts, screws and gaskets are what you need to install or repair a rocking toilet. All bolts are made from solid brass and all gaskets are made from high-quality rubber.

Fits most close-coupled toilets. Universal fit for both round and hex-shaped flush valve nuts. Sponge rubber material.

3-1/2 in OD x 2-1/8 in ID x 1-1/8 in. Double thick sponge rubber gasket with hex recess. Fits most close-coupled toilets.

Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts, rubber spud gasket and washers. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.

Contains 1 sponge rubber gasket, 2 brass bolts measuring 5/16" x 3', 4 flat brass washers, 4 flat rubber washers, 2 hex nuts, and 2 wing nuts.

Fits most 3 in toilet flush valves.

3-5/16 x 2-1/4 x 13/16 in.

Includes 5/16-18 x 3 in tank bolts, nuts, washer and tank-to-bowl washer.

Assembly kit with gasket. Carded.

This washer is an easy to install long-lasting washer that provides a watertight seal to help stop leaking between toilet tank and bowl. The diameters are 3-5/16 in L x 2-1/4 in W.

Includes 5/16-18 x 3 in tank bolts, nuts, washer and tank-to-bowl washer.

Plumb Pak Toilet Tank-to-Bowl Gasket, Sponge Rubber, Suitable for: American Standard Models

Assembly kit with gasket. Carded.

Flanged spud washer. 2 in.

The tank-to-bowl connector kit has 5/16 in x 3-1/8 in polished brass finish closet bolts and the washer is made of rubber.