Includes one universal check valve and two adapters. Made from durable ABS plastic. High-quality Nitrile-Buna N seal. Fits all 1-1/4 and 1-1/2 MPT and FPT.

Rubber boot inlet and outlet. Full flow design, weighted flapper valve.

Rubber boot inlet and outlet. Full flow design, weighted flapper valve.

1-1/2 in pump thread with 1-1/4 in or 1-1/2 in pipe connection.

Includes 2 convertible fittings and 4 hose clamps. Durable thermoplastic valve body and poppet designed to resist corrosion and to stop noise. Handles either 1-1/4 in or 1-1/2 in OD pipe.

This 3/4 by 3/4 in lead-free dual check valve prevents the reverse flow of polluted water from entering into the drinking water supply at the service entrance or at individual outlets. The valve consists of a lead-free brass body construction, with two plastic replaceable check valves and stainless steel springs. It is designed for non-health hazard residential water system containment, continuous pressure applications and is to be installed immediately downstream of the residential water meter, in a vertical or horizontal position. The minimum working pressure is 10 psi and maximum working pressure is 175 psi.

Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.

Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.

Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.

Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.

Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.

Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.

Certified to NSF 61 requirements.

Certified to NSF 61 requirements.

Certified to NSF 61 requirements.

Certified to NSF 61 requirements.

Certified to NSF 61 requirements.

Certified to NSF 61 requirements.

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.

Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, stainless steel washer and stainless steel locknut. 400 psi working pressure.

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, stainless steel washer and stainless steel locknut. 400 psi working pressure.

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, stainless steel washer and stainless steel locknut. 400 psi working pressure.

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, stainless steel washer and stainless steel locknut. 400 psi working pressure.

Prevents water backflow into sump basin. Accept 1-1/4 in or 1-1/2 in discharge lines. Corrosion-resistant construction. Non-threaded, in-line check valve with rubber sleeve and hose clamps.

Durable sonic welded thermo-plastic body.

Double-threaded for use with 1-1/4 in or 1-1/2 in sump pump discharges, Discharge side designed to allow discharge hose to clamp directly in place, built-in anti-airlock hole.

Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.