Circular saw blade for framing projects. For cutting softwood, pressure-treated materials, wood beams and OSB. Durable construction with carbide tips.

4-1/2 in fast cut carbide-tipped saw blade. Fits the RK3441K (Orgill sku 992.4424) Compact circular saw. 24 teeth TCT for smooth cutting in wood. Max rpm: 7000.

Delivers up to six times the life of standard blades in extreme situations provides exceptional performance and impact resistance through its radical new Lock-Tooth design and special Dura-Blend, TiCo carbide; blade has advanced Pyramid Tooth Geometry (PYG), a high performance three-tooth grind sequence provides tracking control for effortless cuts.

Thin kerf saw blade for circular saws. Alternate top bevel, 2.7 mm kerf, 13 deg hook angle.

Construction carbide teeth for longer life. Face ground carbide teeth for fast, clean cuts. Fully hardened plate runs truer longer. Reinforced shoulder for added durability.

Thin kerf saw blades for cordless MARATHON saws. Face ground carbide teeth with aggressive hook angle for fast cuts. Alternate top bevel, 0.063 in kerf, 25 deg hook angle.

Ultra-thin kerf, 0.063 in, for more cuts per charge. Face ground carbide teeth for fast, clean cuts. Aggressive hook angle for fast cuts. Construction carbide teeth for longer life.

Corrosion resistant coating helps prevent rusting. Precision ground teeth for smooth, accurate cuts; slots for straighter cuts.

Diablo thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite. Diablo trim saw blade is proven to extend runtime on Porter Cable?, Saw Boss and similar trim saws.

Thin kerf, 2.7 mm, saw blade for corded circular saws. Corrosion resistant coating helps prevent rusting. Precision ground teeth for smooth, accurate cuts, slots for straighter cuts. Alternate top bevel, 18 deg hook angle.

Ultra-thin kerf, 0.063 in, for more cuts per charge. Face ground carbide teeth for fast, clean cuts. Aggressive hook angle for fast cuts. Construction carbide teeth for longer life.

Irwin? is proud to introduce a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry leading laser-cut, thin kerf saw blades are produced in a highly automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish professional woodworkers and finish carpenters demand.

Irwin? is proud to introduce a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry leading laser-cut, thin kerf saw blades are produced in a highly automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish professional woodworkers and finish carpenters demand.

Next generation 7-1/4 in 24T framing blade with new Tracking Point? tooth design delivers maximum life and durability with effortless cutting performance. Up your cutting game with this one-of-a-kind Tracking Point? tooth grind for unmatched cutting performance and efficiency. This is the only 7-1/4 in blade on the market to include Tracking Point? tooth design, making it is ideal for framers, roofers, remodelers, concrete formers or anyone wanting ultimate cutting performance in pressure-treated wood, 2X lumber, plywood, hardwoods and softwoods.

Thin kerf saw blades for cordless MARATHON saws. Face ground carbide teeth with aggressive hook angle for fast cuts. Alternate top bevel, 0.063 in kerf, 20 deg hook angle.

Cordless saw blade features face ground carbide teeth, ultra-thin kerf, 0.063 in and 23 deg hook angle for fast cuts.

Rockwell Circular Saw Blade, 3-3/8 in Dia, Cutting Edge Material: Carbide, Number of Teeth: 24, 7000 rpm, Applicable Materials: Aluminum, Plastic, Wood, Suitable for: Versacut Compact Circular Saw

For general construction applications, including fast, efficient ripping and crosscutting. Cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding. .098" thin kerf design. 15-degree hook angle. 7,000 max RPM.

Thin kerf saw blade for miter, table saws and portable tools. Alternate top bevel, .071" plate, .098" kerf, 7,000 max RPM, 15 degree hook angle.

Thin kerf, 0.071 in saw blade for portable corded saws. New heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Construction-grade carbide teeth for longer life. Reinforced shoulder for added durability. Alternate top bevel, 20 deg hook angle.

Thin kerf, 0.071 in saw blade for portable corded saws. New heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Construction-grade carbide teeth for longer life. Reinforced shoulder for added durability. Alternate top bevel, 20 deg hook angle.

Diablo thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite. Diablo trim saw blade is proven to extend runtime on all trim saws.

Thin kerf saw blade for miter saws and table saws. No. 400 grit diamond ground teeth. Alternate top bevel, 1.6 mm plate, 0.095 in kerf, 20 deg hook angle, 5900 max rpm.

Thin kerf saw blade for miter saw and portable tools. Designed for cutting oak, pine, plywood, pressure treated lumber and beams. Alternate top bevel, .071" plate, .098" kerf, 15 degree hook angle.

Micrograin titanium carbide, thin kerf, saw blade used for ripping and crosscutting applications. Alternate top bevel, .040" plate, .059" kerf, 15 degree hook angle, 10,000 max rpm.

Featuring tungsten carbide teeth for maximum durability and a thin kerf for fast, smooth cuts, DeWALT? small diameter construction saw blades power through a variety of building materials with ease. Ribbed heat vents allow blades to run at cooler temperatures, reducing blade flexing and binding. Anti-stick coating minimizes friction and gum up.

Thin kerf, 0.071 in saw blade for portable corded saws. New heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Construction-grade carbide teeth for longer life. Reinforced shoulder for added durability. Alternate top bevel, 20 deg hook angle.

Thin kerf, 0.071 in saw blade for portable corded saws. New heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Construction-grade carbide teeth for longer life. Reinforced shoulder for added durability. Alternate top bevel, 20 deg hook angle.

Thin kerf saw blades for cordless MARATHON saws. Face ground carbide teeth with aggressive hook angle for fast cuts. Alternate top bevel, 0.063 in kerf, 20 deg hook angle.

Thin kerf saw blade for miter saws and table saws. Alternate top bevel, 1.8 mm plate, 0.095 in kerf, 20 deg hook angle.

Corrosion resistant coating helps prevent rusting. Precision ground teeth for smooth, accurate cuts; slots for straighter cuts.

This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD? coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4 to 2-3/4 in thick.

This multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4 in thick. The blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2 to 2-3/4 in thick, thinner or thicker materials may be cut, resulting in some loss of surface finish.

Diablo D1632X is ideal for cutting oak, pine, plywood, pressure-treated lumber, wood composites and beams. Diablo 16-5/16 in x 32t ATB general-purpose saw blade for large-capacity beam saws. Ideal for timber framing such as laminated veneer lumber, glued timber (glulams) and paralams.

Thin kerf, 2.2 mm, saw blade for circular saws. Corrosion resistant coating helps prevent rusting. Precision ground teeth for smooth, accurate cuts. Slots for straighter cuts. Alternate top bevel, 0.088 in, 20 deg hook angle.

Thin kerf, 0.071 in saw blade for portable corded saws. New heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Construction-grade carbide teeth for longer life. Reinforced shoulder for added durability. Alternate top bevel, 20 deg hook angle.

Ultra-thin kerf, 0.063 in, for more cuts per charge. Face ground carbide teeth for fast, clean cuts. Aggressive hook angle for fast cuts. Construction carbide teeth for longer life.

Thin kerf, 0.083 in, saw blade for miter saws and table saws. Construction-grade carbide teeth for longer life; #400 grit diamond ground teeth for a smooth finish. Alternate top bevel, 20 deg hook angle, max rpm 7300.

Thin kerf, 0.071 in saw blade for portable corded saws. New heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Construction-grade carbide teeth for longer life. Reinforced shoulder for added durability. Alternate top bevel, 20 deg hook angle.

Featuring tungsten carbide teeth for maximum durability and a thin kerf for fast, smooth cuts, DeWALT? small diameter construction saw blades power through a variety of building materials with ease. Ribbed heat vents allow blades to run at cooler temperatures, reducing blade flexing and binding. Anti-stick coating minimizes friction and gum up.

Diablo cordless framing blade is ideal for general construction applications, including fast, efficient ripping and crosscutting. Diablo blade cuts rough framing lumber, high-quality finish lumber, plywood, OSB and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo unique design, extra-tough steel plate and proprietary carbide tips deliver longer life and frames more houses than other framing blades.

Thin kerf, .059, saw blade for use on handheld circular saws. Durable 'MicroGrain Titanium Carbide' for razor sharp cuts and long life. Laser cut stabilizer vents for reduced vibration and precise cuts. Blades leave a smooth finish when ripping and crosscutting 1x stock, decking, fencing and plywood. ATB tooth design.

Diablo framing blade is ideal for general construction applications, including fast, efficient ripping and crosscutting. Diablo blade cuts rough framing lumber, high-quality finish lumber, plywood, OSB and hardboard siding with the smoothest, fastest and most accurate cut.

Diablo general-purpose blade is ideal for cutting oak, pine, plywood, pressure-treated lumber and beams. An excellent choice for table and miter saws, Diablo blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades or make quality crosscuts in solid wood or plywood. Great for both sliding and chop style miter saws as well as table saws.

Thin kerf, 0.071 in saw blade for portable corded saws. New heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Construction-grade carbide teeth for longer life. Reinforced shoulder for added durability. Alternate top bevel, 20 deg hook angle.

Thin kerf saw blade for miter saws and portable tools. Alternate top bevel, .071" plate, .098" kerf, 15 degree hook angle, 6,000 max RPM.

For miter/slide miter saw. Non-stick permashield coating. .098" thin kerf, 15-degree hook angle, and 6,000 max rpm.

Diablo finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. Diablo Finish blades are the ideal choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood.