The CS is a continuous utility strap designed to resist tension and uplift loads. This coiled strap can be cut to length on the job site and used in a single 2X stud or post application. The CS is ideal for many applications including resisting uplift in a floor-to-floor application and also resisting tension in a horizontal application.

CS coiled utility straps are an ideal solution when it is desired to brace wall studs via the flanges with strap. These products are packaged in lightweight cartons (about 40 lb) and can be cut to length on the job site.

The STHD is an embedded strap-tie holdown offering high-loads in both wood and cold-formed steel construction. When installed on the forms with the StrapMate? strap holder or other holding device, the unique design of this cast-in-place strap-tie holdown delivers enhanced stability before and during the pour to help prevent both parallel and perpendicular movement. This results in accurate positioning of the strap and reduced possibility of spalling.

The MTS provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS has a small bend section to reduce interference at the transition points between the two members.

The MTS provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS has a small bend section to reduce interference at the transition points between the two members.

The LTS provides a tension connection between two members, resisting light to medium uplift loads at the rafter or heel of a truss. This economical light twist strap has a small bend section to reduce interference at the transition points between the two members.

The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts.

The DPTZ deck post tie products are used to attach 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members.

The DJT14Z deck joist tie is designed to attach 2X deck joists to the side of 4X or larger support posts. The DJT14Z can be installed with either nails or bolts.

The CS is a continuous utility strap designed to resist tension and uplift loads. This coiled strap can be cut to length on the job site and used in a single 2X stud or post application. The CS is ideal for many applications including resisting uplift in a floor-to-floor application and also resisting tension in a horizontal application.

The T is designed for beam-to-column applications. This versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. The T features well-placed fastener holes and can easily be installed with nails or bolts.

The MTS provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS has a small bend section to reduce interference at the transition points between the two members.

The LTS provides a tension connection between two members, resisting light to medium uplift loads at the rafter or heel of a truss. This economical light twist strap has a small bend section to reduce interference at the transition points between the two members.

The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.

The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.

The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.

The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.

The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.

The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.

The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.

The HRS is designed to resist tension forces between two wood members. The HRS416Z is designed for 4X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.

The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.

The Outdoor Accents decorative hardware product line features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The APVST flat strap works for lumber in both nominal and rough sizes. It can be used to connect two beams together or added to any project as a decorative accent. Part of the Avant Collection.

Outdoor Accents? flat T-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This T-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant collection.

Outdoor Accents? flat T-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This T-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant collection.

Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This L-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant Collection.

Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This L-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant Collection.

The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The deck joist tie attaches 2X joists to the side of 4X or larger support posts. It installs quickly and easily with the Outdoor Accents? structural wood screw and hex head washer for the look of a bolted connection. Part of the Avant collection.

The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The deck joist tie attaches 2X joists to the side of 4X or larger support posts. It installs quickly and easily with the Outdoor Accents? structural wood screw and hex head washer for the look of a bolted connection. Part of the Avant collection.

Outdoor Accents? flat T-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look.

Outdoor Accents? flat T-strap from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents? structural screws and hex head washers.

Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents? structural screws and hex head washers.

Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents? structural screws and hex head washers.