Frame tie with buckle for fast and easy installation with tie-down manufactured home anchors and slotted bolt.

Heavy polyethylene jacket with UV inhibitors. R-Value of 4.2. For use outdoors or indoors. Designed specifically for use in manufactured and mobile home HVAC systems. 1-1/4 in thickness. Black jacket.

For heat distribution. Damper to adjust air flow. Heavy, one-piece steel face combines strength and good looks. Mar-resistant, baked enamel finish.

For heat distribution. Damper to adjust air flow. Heavy, one-piece steel face combines strength and good looks. Mar-resistant, baked enamel finish.

For heat distribution. Damper to adjust air flow. Heavy, one-piece steel face combines strength and good looks. Mar-resistant, baked enamel finish.

Used on roofs to cover and protect vent pipes. Size of 5-1/2 in OD x 3-1/2 in ID. Bagged.

For powered range hoods, bathroom and kitchen exhaust. Read instructions before installing. Size of 2-3/8 in x 2-31/32 in. 115 V. Bagged.

Seals and remains soft indefinitely. Easy-to-apply with great water tight adhesion. 1/8 in thick. Bagged.

Exposed 3-3/8 in center to center, 4 in spout. Brass underbody, metal handles. Right side cold. With riser nut. Bagged.

Plastic with plastic underbody. 8 in center to center. 1 to 4 to 8 in offset hole configuration. With clear plastic handles. Bagged.

Plastic, 4 in center to center. Bottom mounts on faucet. 3/8 in #P038 shower head attaches to top. Clear handles. Bagged.

Plastic with brass underbody, 4 in center to center. Clear handles. Bagged.

Plastic with plastic underbody, 8 in center to center. Clear handles. Bagged.

Clear handles. Brass underbody, 8 in center to center.

For bedroom or bathroom doors. 2-3/8 backset. Bagged.

Used in the installation of ceiling tile, mirrors and many other household fixtures. 1-1/8 in Dia. Screws included with white buttons have white heads, screws included with clear buttons have mill finish heads. Bagged.

Used in the installation of ceiling tile, mirrors and many other household fixtures. 1-1/8 in Dia. Screws included with white buttons have white heads, screws included with clear buttons have mill finish heads. Bagged.

Used on front and rear entrance doors. Round drive-in latch locked from exterior by key, locked from interior by pushing handle in and turning clockwise. 2-3/8 in backset. Key included. Requires Philips head screwdriver for installation. Carded.

Engineered for installation in light density soils. 5/8 in rod, 6 in helix.

Plastic compression stem. For Phoenix/Streamway; Fits lavatory, kitchen and 4 in bath diverter.

For fast and safe installation of frame ties, heavy-duty 1/4 in steel hook locks securely onto frame. Certified galvanized steel strapping conforms to NCS BCS A225.1 (ANSI A119.3) and HUD specifications.

Mill finish. Attaches to awning window operator for opening and closing. 5/16 in spline Dia. Screws included.

Holds storm window or screen in place. Includes Phillips head screws. 21/32 in x 1/8 in. Size of 15/16 in x 3/8 in.

Holds storm window or screen in place. Includes Phillips head screws. 21/32 in x 1/8 in. Size of 7/8 in x 1/2 in.

Used to affix drawer 1-1/2 in track to rear of cabinet. 2-3/4 in Width.

Guides drawer inward and outward along metal 1-5/16 in drawer track.

Guides drawer inward and outward along 1-1/8 in metal drawer track.

Attaches to 1/2 in round bar and window sill to allow movement of window. 1 in center to center holes. Size of 1-1/2 in H x 5/8 in W x 1-11/16 in D.

Used on roofs to cover and protect vent pipes. Size of 2-7/8 in x 5-7/16 in OD x 2 in ID.

Includes 1 hot and 1 cold handle.

Brass, for 3-3/8 in center to center exposed faucets with brass underbodies. Screw in clockwise, unscrew counter clockwise. Requires a crescent wrench. Size 13/32 x 1-5/8 x 3/4 in.

Brass, for concealed 2 and 3 valve, 8 in center to center diverters and garden tub faucets with brass underbodies. Installs clockwise. Requires a crescent wrench. Size 13/32 x 1-5/8 x 3/4 in.

Used with 2 and 3 valve diverters. Cosmetic covering for junction between faucet and wall. 15/16 in threaded.

Brass, for bath diverters manufactured before 01/01/85. Used in concealed bathtub. 2 and 3 valve diverters with brass underbodies. Installs clockwise. Requires a crescent wrench. Size 3/8 x 1-5/8 x 3/4 in.

Made of clear plastic. Includes one hot and one cold handle. 1-3/4 in H x 3/8 in ID. With screws.

White plastic for washerless hot or cold faucets with brass and plastic underbodies manufactured after 5/1/87. Used in most Tiger and Phoenix faucets. Installs clockwise. Requires a crescent wrench. Size 13/32 x 1-13/16 x 7/8 in.

White plastic. Used in most Utopia faucets. Installs clockwise. Requires a crescent wrench. Size 13/32 x 1-7/8 x 3/4 in.

Used for water drainage in tubs. Consists of a tub strainer with popstop, 1-25/32 in ID threaded strainer adapter and 1-29/32 in ID P-Trap. Black color.

Black in color.

Twist and close. Size of 3 in x 1-7/8 in.

Used to hold and release water in vanity sink bowl. 2-1/8 in flange. 1-1/4 in Dia x 5-1/2 in L.

Universal. Black color.

Made of clear plastic material. Includes one hot and one cold handle. 1-3/4 in H x 3/8 in ID. With screws.

Replacement lock assembly for compartment doors. Includes 1-5/8 in straight cam and 1-5/8 in cam with 3/8 in offset.

For RV entrance screen doors. Metal construction with rubber rollers. 1-1/16 in mounting center.

Includes screen door magnet 1-1/2 in center to center and 7/16 in x 1-1/4 in metal plate.

For stationary propane use. With drip lip vent. Gas pressure 11 in water column. 7/16 in female x 9/16 in female.

Holds storm window or screen in place. Includes Phillips head screws. 21/32 in x 1/8 in. Size of 15/16 in x 3/8 in.

Contains a left and right adjustable two-piece rear drawer socket. Adjusts 1/4- 1-1/2 in. 1 set per card.

Holds storm window or screen in place. Includes Phillips head screws. 21/32 in x 1/8 in. Size of 15/16 in x 3/8 in.

Non-handed bottom. New style.

Holds storm window or screen in place. Includes Phillips head screws. 21/32 in x 1/8 in. Size of 15/16 in x 3/8 in.

Holds storm window or screen in place. Includes Phillips head screws. 21/32 in x 1/8 in. Size of 7/8 in x 1/2 in.

For heat distribution. Damper to adjust air flow. Heavy, one-piece steel face combines strength and good looks. Mar-resistant, baked enamel finish.

For heat distribution. Damper to adjust air flow. Heavy, one-piece steel face combines strength and good looks. Mar-resistant, baked enamel finish.

Used for bathroom exhaust fan, combination light and fan V-027. Size of 8-1/4 in. Bagged.

For heat distribution. Damper to adjust air flow. Heavy, one-piece steel face combines strength and good looks. Mar-resistant, baked enamel finish.

For heat distribution. Damper to adjust air flow. Heavy, one-piece steel face combines strength and good looks. Mar-resistant, baked enamel finish.

Used to move air through bath and kitchen exhaust fans. Size of 3/16 in shaft, 6-1/2 in OA.

Used to mount D-138 rosette button and stock numbers D-140 clear. Bagged.

Used to mount D-138 rosette button and stock numbers D-140 clear. Bagged.

Installs and removes square head screws.

Seals and remains soft indefinitely. Easy-to-apply with great water tight adhesion. 1/8 in thick. Bagged.

Used to hold and release water in vanity sink bowl. 2-1/8 in flange. 1-1/4 in Dia x 5-1/2 in L.

Twist and close. Size of 3 in x 1-7/8 in.

White plastic. For use with all Utopia faucets and diverters after 1997. Size 13/32 x 2-3/146 x 3/4 in.

Includes faucet shank, O-ring, Positive-seal elbow, MPT and riser with cone.

Black in color.

Universal for lavatory or kitchen. Black color.

White plastic for washerless faucets. 8 in bath center. Size 3-7/16 in.

Metal basket with plastic peg post. For the P-091P. Size of 3 in x 1-1/2 in x 2-7/8 in.

Chrome finish plastic, bathtub spout threaded and includes P-010C nipple.

Chrome finish plastic. Hook-up with 1/2 in MPT.

Chrome finished metal. 1-5/16 in ID female thread. Used with faucet # P-009N, P-009NB, P-019N, P-019NB, RV-022, RV-022B, P-670, P-670B, P-671 and P-671B.

Clear plastic diverter knob for Utopia.

Black in color.

White plastic for washerless faucets. For 8 in 3 valve bath diverters.

No overflow. ABS top and body.

Size 11/16 in x 1/4 in x 1/2 in. Black color.

For P-009N, P-019N, P-670 and P-671. Washer only P-039.

White plastic for washerless faucets. Screw in clockwise. Size 1-15/16 in.

Made of smoked plastic. Includes one hot and one cold handle. 1-15/16 x 1-7/8 in.

Brass, for 8 in bath diverters manufactured after 01/01/85. 1-9/16 in.

Chrome finish metal for P-004N. 1/2 in MPT. Pop-up only is not replaceable must purchase complete spout.

Chrome plastic.

Adjustable from 8 to 24 in. Brass stem and body with clear handles. Uses No P-673C stem and P-016 handles.

Made of clear plastic. Includes one hot and one cold handle. 2-1/2 x 2-1/2 in.

Clear handles. Brass underbody, 8 in center to center.

Size 2-3/4 in x 4-1/2 in.

Size 1-9/16 in x 4-1/4 in.

Size 1-9/16 in x 4-1/4 in.

Size 1-9/16 in x 4-1/4 in. Carded.

Drive-in latch. 2-3/8 in setback. Used on Kwikset interior lockset.

For hall and closet doors where no locking is required, both knobs always free. 2-3/8 in setback. Fits doors 1-3/16 to 2 in thickness.

Used in installation of ceiling tile, mirrors and many other household fixtures. 1-1/8 in Dia.

Used in installation of ceiling tile, mirrors and many other household fixtures. 1-1/8 in Dia.

Used in installation of ceiling tile, mirrors and many other household fixtures. 1-1/8 in Dia.

Standard or drive-in latch. Fits doors 1-3/8 to 1-5/8 in thickness. 2-3/8 in setback. Key to thumb. Bagged.

Imported 4 way universal entry lock. Standard or drive-in latch. Fits doors 1-3/8 to 1-5/8 in thickness. 2-3/8 in or 2-3/4 in setback. Carded.

Standard or drive-in latch. Key to thumb. Fits doors 1-3/8 to 1-5/8 in thickness. 2-3/8 in setback. Bagged.