For stripping paint and varnish, softening caulk and putty for removal, removing adhesive labels. Thawing pipes, gutters, freezers or radiators. Loosening rusted nuts and bolts. Speed-drying epoxy, cement or any damp surface and more. ETL Listed. Includes 2 deflector nozzles, 1 reflector nozzle and 1 air reduction nozzle. Air reduction nozzle concentrates heat. Deflector nozzles protect glass and other surfaces. Reflector nozzle speeds thawing of pipes. 3-position rocker type switch for high temp, off and low temp. Voltage rating of 120 VAC at 60 Hz. Rated input power rating of 12.5 A. Output rating of 750/1500 W. Air temperature rating 572/1000 deg F. Air volume of 10/17 cu-ft/min.

Rust Remover is an environmentally friendly, water-based, biodegradable, non-flammable remover of rust spots and stains. Rust remover is non-corrosive and does not contain phosphoric or hydrochloric acid. It removes most rust spots and stains from interior and exterior surfaces including concrete, toilets, sinks, bathtubs, appliances, clothing upholstery, metal, wrought iron, house siding, sporting goods and more.

Multi-strip is a unique, environment-friendly safe paint remover designed to remove up to 15 layers of paint and varnish. A lighter coat will remove 1 to 4 layers quickly while a heavier coat will remove multiple layers over time. It is biodegradable, non-flammable, odor-free and contains no methylene chloride or caustic. It can be brushed, rolled or sprayed on with an airless paint sprayer. Multi-strip removes most varieties of paints and varnishes which are oil or water-based. Unlike other removers it can remove more difficult coatings such as two-part epoxy and urethanes. Multi-strip works on interior and exterior surfaces.

Multi-strip is a unique, environment-friendly safe paint remover designed to remove up to 15 layers of paint and varnish. A lighter coat will remove 1 to 4 layers quickly while a heavier coat will remove multiple layers over time. It is biodegradable, non-flammable, odor-free and contains no methylene chloride or caustic. It can be brushed, rolled or sprayed on with an airless paint sprayer. Multi-Strip removes most varieties of paints and varnishes which are oil or water-based. Unlike other removers it can remove more difficult coatings such as two-part epoxy and urethanes. Multi-Strip works on interior and exterior surfaces.

Graffiti remover is an environment-friendly, water-based, biodegradable, non-flammable way of removing unwanted aerosol spray paints. from many surfaces. It contains no methylene chloride, caustic or other flammable chemicals. It will remove most varieties of aerosol paint, enamels, acrylics, oil and water-based paints, primers, semi-gloss and gloss paints, lacquers and sealers. Effective removing other graffiti-type marks such as ink, crayon, magic marker, dyes, lipstick, shoe polish. It works on most surfaces including brick, concrete, stone, cinder block, stucco, street signs, metal, steel, aluminum, vinyl and fiberglass.

Ready-strip spray remover is a convenient and easy way of removing paint or varnish. Ready-strip spray features include a no-drip formula and the ability to stay wet longer to remove paint effectively. It contains no methylene chloride, caustic or other harsh chemicals. It easily cleans up with water. Ready-strip spray can remove oil and water-based coatings and works almost as fast as a traditional stripper.

Back To Nature is a technologically advanced paint and varnish remover that is environmentally safe, user friendly and capable of removing up to 7 layers of oil or water-based coatings in a single application. Our unique color change technology signals when paint removal has occurred. Ready-Strip Plus is applied to the surface and turns off white when the paint or varnish is ready to be removed. Ready-Strip Plus is biodegradable, non-flammable, odor-free and is easily cleaned up with water. It contains no methylene chloride or caustic.

Ready-Strip Plus is a technologically advanced paint and varnish remover that is environmentally safe, user friendly and capable of removing up to 7 layers of oil or water-based coatings in a single application. Our unique color change technology signals when paint removal has occurred. Ready-Strip Plus is applied to the surface and turns off white when the paint or varnish is ready to be removed. Ready-Strip Plus is biodegradable, non-flammable, odor-free and is easily cleaned up with water. It contains no methylene chloride or caustic.

Goof Off Pro-Strength remover works the first time quickly and easily removing tough spots and stains, like chewing gum, that ordinary household cleaners can't.

Works on carpet, fabric, pre-wash on clothes, furniture and walls. Removes chewing gum, crayon marks, fried foods, grease, lipstick, motor oil, pitch, sap, sticker, tape, bugs, tar, salad dressing and more. Low-VOC solvent-based cleaner.

Specifically developed for the contractor trade. Designed for the contractor, this industrial degreaser workhorse is exceptional at cleaning concrete, removing silicone, caulk, putty nails, floor adhesive, water seal, wet paint (won't harm dry paint), roofing tar and more from virtually any surface! A heavy-duty degreaser and concrete cleaner; it's even safe on vehicles, laundry, skin and hair! No harmful vapors, benzene or chlorinated solvents.

Removes thousands of tough challenges from virtually any surface, even laundry, skin & hair. Removes icky, sticky, gooey, waxy, oily spills, spots and stains from any surface. Also removes adhesive, candle wax, stickers, lipstick, make-up, grease and more! Eco-friendly remover, 100% organic, non-toxic, biodegradable.

Stop rust in its tracks with Rust-Oleum? STOPS RUST? Rust reformer. A layer of this flat-black coating bonds with rusty metal and instantly transforms it into a non-rusting surface. No need to sand down to bare metal, simply spray directly onto rust.

Motsenbocker's Lift Off? Breaks the Molecular Bond? for fast and easy removal of solvent and water-based paints, varnishes, wood stains, lacquers, polyurethane, epoxy and shellac from cabinetry, flooring, furniture, wood, metal, stone and masonry surfaces. Gel formula works on flat or vertical surfaces.

For removing paint, varnish and stain and cleaning tile, grout, stoves and small parts. Bottom 6 rows of crimped white polypropylene, trimmed 5/8 in. Top 3 rows of crimped brass wire, angled from tip, trimmed 1/2 in. Handle 7 in sturdy molded plastic in assorted colors with hanging hole.

A rust-inhibiting coating. Ospho causes iron oxide (rust) to chemically change to iron phosphate. Resists/retards rust, provides a sound base for paint.

A rust-inhibiting coating. Ospho causes iron oxide (rust) to chemically change to iron phosphate. Resists/retards rust, provides a sound base for paint.

Goof Off Pro-Strength remover works the first time quickly and easily removing tough spots and stains, like chewing gum, that ordinary household cleaners can't.

The patented formula of Motsenbocker's Lift Off Breaks the Molecular Bond? for fast and easy removal of painter's tape, duct tape, mounting tape, weather stripping tape, spray adhesives, stickers, labels, chewing gum, sticky residues, wax and glue from hard surfaces.

This professional line of heat guns offer ergonomic style and powerful heating elements. With stay cool handles and heat shields, you can use these all day while you stay cool. Model 8975-6 offers 570 deg and 1000 deg temperature ranges. All this power and it only weighs 1.8 lb.

Removes paint, enamels, semi/high-gloss, oil lacquers, acrylic, water-based sealers, primers, stain killers, permanent markers and highlighters on hard/soft surfaces. For stucco, stone, Lexan, tile, Plexiglas, stainless steel, metals/alloys and cars. Biodegradable.

Goof Off Graffiti Remover is the new Non-NMP formula that is quick and easy way to remove most-types of graffiti. The gelled formula will cling to most surfaces like stone, brick, wood, metal, concrete and certain auto-finishes.

Our heat gun has a dual-fan speed selector that offers high and low fan speed settings. The variable temperature control dial allows for easy adjustment of temperatures and the integrated hands-free support stand allows the gun to sit upright for ease of use. It's lightweight to help lower user fatigue. It is ideal paint removal, bending plastic pipes, welding plastics, removing adhesive tiles and shrinking plastic tubing.

For almost 50 years, Howard's Restor-A-Finish has been a standard in the antique industry. Because Restor-A-Finish preserves and restores beauty to the original wood finish, it helps preserve the antiques' authenticity and value, whereas stripping the finish may literally strip the piece of its value. Restor-A-Finish penetrates faded lacquer, shellac and varnish finishes to bring back the original color and luster. It restores the depth of grain in wood finishes, going much deeper than temporary "scratch cover" products. Restor-A-Finish penetrates and permanently restores most wood finishes without removing any of the existing finish - this is why it is very popular for antiques. Restor-A-Finish maintains the original "patina" of an antique finish, maintaining its character and value as an antique. To protect the newly restored finish Feed-N-Wax is recommended as a follow-up to Restor-A-Finish.

For almost 50 years, Howard's Restor-A-Finish has been a standard in the antique industry. Because Restor-A-Finish preserves and restores beauty to the original wood finish, it helps preserve the antiques' authenticity and value, whereas stripping the finish may literally strip the piece of its value. Restor-A-Finish penetrates faded lacquer, shellac and varnish finishes to bring back the original color and luster. It restores the depth of grain in wood finishes, going much deeper than temporary "scratch cover" products. Restor-A-Finish penetrates and permanently restores most wood finishes without removing any of the existing finish - this is why it is very popular for antiques. Restor-A-Finish maintains the original "patina" of an antique finish, maintaining its character and value as an antique. To protect the newly restored finish Feed-N-Wax is recommended as a follow-up to Restor-A-Finish.

For almost 50 years, Howard's Restor-A-Finish has been a standard in the antique industry. Because Restor-A-Finish preserves and restores beauty to the original wood finish, it helps preserve the antiques' authenticity and value, whereas stripping the finish may literally strip the piece of its value. Restor-A-Finish penetrates faded lacquer, shellac and varnish finishes to bring back the original color and luster. It restores the depth of grain in wood finishes, going much deeper than temporary "scratch cover" products. Restor-A-Finish penetrates and permanently restores most wood finishes without removing any of the existing finish - this is why it is very popular for antiques. Restor-A-Finish maintains the original "patina" of an antique finish, maintaining its character and value as an antique. To protect the newly restored finish Feed-N-Wax is recommended as a follow-up to Restor-A-Finish.

For almost 50 years, Howard's Restor-A-Finish has been a standard in the antique industry. Because Restor-A-Finish preserves and restores beauty to the original wood finish, it helps preserve the antiques' authenticity and value, whereas stripping the finish may literally strip the piece of its value. Restor-A-Finish penetrates faded lacquer, shellac and varnish finishes to bring back the original color and luster. It restores the depth of grain in wood finishes, going much deeper than temporary "scratch cover" products. Restor-A-Finish penetrates and permanently restores most wood finishes without removing any of the existing finish - this is why it is very popular for antiques. Restor-A-Finish maintains the original "patina" of an antique finish, maintaining its character and value as an antique. To protect the newly restored finish Feed-N-Wax is recommended as a follow-up to Restor-A-Finish.

For almost 50 years, Howard's Restor-A-Finish has been a standard in the antique industry. Because Restor-A-Finish preserves and restores beauty to the original wood finish, it helps preserve the antiques' authenticity and value, whereas stripping the finish may literally strip the piece of its value. Restor-A-Finish penetrates faded lacquer, shellac and varnish finishes to bring back the original color and luster. It restores the depth of grain in wood finishes, going much deeper than temporary "scratch cover" products. Restor-A-Finish penetrates and permanently restores most wood finishes without removing any of the existing finish - this is why it is very popular for antiques. Restor-A-Finish maintains the original "patina" of an antique finish, maintaining its character and value as an antique. To protect the newly restored finish Feed-N-Wax is recommended as a follow-up to Restor-A-Finish.

For almost 50 years, Howard's Restor-A-Finish has been a standard in the antique industry. Because Restor-A-Finish preserves and restores beauty to the original wood finish, it helps preserve the antiques' authenticity and value, whereas stripping the finish may literally strip the piece of its value. Restor-A-Finish penetrates faded lacquer, shellac and varnish finishes to bring back the original color and luster. It restores the depth of grain in wood finishes, going much deeper than temporary "scratch cover" products. Restor-A-Finish penetrates and permanently restores most wood finishes without removing any of the existing finish - this is why it is very popular for antiques. Restor-A-Finish maintains the original "patina" of an antique finish, maintaining its character and value as an antique. To protect the newly restored finish Feed-N-Wax is recommended as a follow-up to Restor-A-Finish.

Howard's Restor-A-Finish has been a standard in the antique industry. Because Restor-A-Finish preserves and restores beauty to the original wood finish, it helps preserve the antiques? authenticity and value, whereas stripping the finish may literally strip the piece of its value. Restor-A-Finish penetrates faded lacquer, shellac and varnish finishes to bring back the original color and luster. It restores the depth of grain in wood finishes, going much deeper than temporary "scratch cover" products. Restor-A-Finish penetrates and permanently restores most wood finishes without removing any of the existing finish - this is why it is very popular for antiques. Restor-A-Finish maintains the original "patina" of an antique finish, maintaining its character and value as an antique. To protect the newly restored finish Feed-N-Wax is recommended as a follow-up to Restor-A-Finish.

Specially formulated gel that softens many types of latex caulks and sealants for easy removal. It has a fast-acting formula that works in as little as two hours.

Stop rust in its tracks with Rust-Oleum? STOPS RUST? Rust Reformer. A layer of this flat-black coating bonds with rusty metal and instantly transforms it into a non-rusting surface. No need to sand down to bare metal, simply spray directly onto rust.

The patented formula of Motsenbocker's Lift Off Breaks the Molecular Bond? for fast and easy removal of polyurethane sealants, expansion foams, silicone caulks, construction adhesives and two-part epoxies from tub and shower enclosures, vinyl flooring, baseboards, tile, porcelain, stainless steel, cast iron, wood, granite, marble, ceramic and stone.

Krud Kutter? Graffiti remover is a proprietary blend of biodegradable surfactants, detergents and emulsifiers that is designed to remove dried paints and stains on a variety of surfaces. It removes acrylic and acrylic enamel, aerosol paint, alkyd and polyurethane enamels, oil-based lacquers, primers, sealers, water-based enamels and also removes permanent markers, ink, lipstick, crayon and shoe dye.

The D26950 heat gun features an innovative kickstand for great stability and allows professionals to control the temperature with variable control. Built-in hang ring makes for convenient storage. The DeWALT? heat gun is lightweight, compact and durable.

Goof Off Pro-Strength remover works the first time quickly and easily removing tough spots and stains, like chewing gum, that ordinary household cleaners can't.

For plastics, carpets, furniture, clothes and concrete. Removes latex low-, semi- and high-gloss paints, latex aerosols, paint over spray, wood stains, latex enamels, water-based sealers, linseed oils, latex stains, lacquer over spray and stencil paints. Biodegradable.

Specifically developed for the contractor trade. Designed for the contractor, this industrial degreaser workhorse is exceptional at cleaning concrete, removing silicone, caulk, putty nails, floor adhesive, water seal, wet paint (won't harm dry paint), roofing tar and more from virtually any surface! A heavy-duty degreaser and concrete cleaner; it's even safe on vehicles, laundry, skin and hair! No harmful vapors, benzene or chlorinated solvents.

Goof Off? marks, messes and stains remover cuts through tough spots and stains quickly. Its powerful, micro-emulsion formula removes the difficult messes and mistakes ordinary cleaners can't handle.

Two heat settings for a variety of application. Lightweight and easy-to-use, one-handed. Built-in stand for easy cool-down. Power rating of 120 W, air temperature rating of 750 to 1000 deg F and air flow of 12 cfm. Double-insulated, 6 ft long cord. UL listed.

For almost 50 years, Howard's Restor-A-Finish has been a standard in the antique industry. Because Restor-A-Finish preserves and restores beauty to the original wood finish, it helps preserve the antiques' authenticity and value, whereas stripping the finish may literally strip the piece of its value. Restor-A-Finish penetrates faded lacquer, shellac and varnish finishes to bring back the original color and luster. It restores the depth of grain in wood finishes, going much deeper than temporary "scratch cover" products. Restor-A-Finish penetrates and permanently restores most wood finishes without removing any of the existing finish - this is why it is very popular for antiques. Restor-A-Finish maintains the original "patina" of an antique finish, maintaining its character and value as an antique. To protect the newly restored finish Feed-N-Wax is recommended as a follow-up to Restor-A-Finish.

Specifically developed for the contractor trade. Designed for the contractor, this industrial degreaser workhorse is exceptional at cleaning concrete, removing silicone, caulk, putty nails, floor adhesive, water seal, wet paint (won't harm dry paint), roofing tar and more from virtually any surface! A heavy-duty degreaser and concrete cleaner; it's even safe on vehicles, laundry, skin and hair! No harmful vapors, benzene or chlorinated solvents.

Krud Kutter? Waste paint and colorant hardener is designed to turn liquid paint into a solid material for curbside disposal. It is easy to use and works in minutes. It is suitable for latex and oil-based paints and colorants.