Textured one-component, fast-curing, flexible material providing a durable elastic bond. Adheres to concrete, masonry, stucco, pre-painted metal, glass, plywood, aluminum, steel and many plastics and composites. Can be applied to approximately 12 linear ft in a 3/8 in bead.

High performance, construction-grade sealant waterproofs, seals and tuck-points damaged mortar joints. Textured one-component, fast-curing, flexible material providing a durable elastic bond. Adheres to concrete, masonry, stucco, pre-painted metal, glass, plywood, aluminum, steel and many plastics and composites. Can be applied to approximately 12 linear ft in a 3/8 in bead.

ClarkDietrich Bullnose Transition Cap, 4-1/2 in W

Easily repair concrete cracks and holes with Rust-Oleum concrete patch and repair. This two-part, industrial-strength epoxy permanently bonds concrete, won't shrink or crack and creates an extremely hard surface that is stronger than concrete.

Use to repair large or small holes or to test faux painting. Attaches to studs. Uses real dry wall.

Vinyl corner bead (VLCB) (formerly known as CB125) is a rigid, easy-to-apply 90 deg corner reinforcement that can be nailed or stapled into place. Multiple perforations along the 1-1/4 in flanges enhance joint compound bonding. The pronounced nose provides a ground and screed to help the finisher achieve precise finishing depth. Rigid vinyl is dent-resistant, rustproof and maintains shape with no sharp edges or burrs when field cut. All vinyl products readily accept finish treatments such as paint and spray or roll-on textures.

Vinyl bullnose corner bead is used to create a smooth, rounded look to standard drywall corners. Vinyl bullnose adds contemporary styling and a sense of openness to any room. Available in choice of 3/4 in or more dramatic 1-1/2 in radius. Easily installed with nails, screws or staples, this sturdy vinyl product is rustproof and dent-resistant.

FAMOWOOD? original wood filler has been the choice of professional woodworkers for over 70 years, it does not matter whether you are masking small or large defects, FAMOWOOD? can handle the job it spreads smoothly into cracks and holes, takes stains and paints evenly and resists cracking, ideal for any type of custom wood project.

Homax? Easy patch popcorn ceiling texture is ideal for repairing or applying popcorn texture. Our new and improved actuator allows for easy vertical spraying of material. The water-based formula is dispensed in an aerosol, allowing you to easily make small repairs to damaged popcorn ceilings, plus it is easy to cleanup and low odor.

BONDS ON is a high-strength, multi-purpose, self bonding cement repair material for thin section repair and resurface, from 1/2 in to feather-edge, on concrete, stucco and masonry. Use to repair chipped, cracked or spalled concrete, to build-up broken step corners or to resurface floor and walls, driveways and walks. Also use to set tile, flagstone and slate. BONDS ON provides a high-strength finish which is significantly stronger than a regular cement mix. Just add water and mix. Since BONDS ON includes a vinyl resin, no liquid bonding agents or additives are needed.

BONDS ON is a high-strength, multi-purpose, self bonding cement repair material for thin section repair and resurface, from 1/2 in to feather-edge, on concrete, stucco and masonry. Use to repair chipped, cracked or spalled concrete, to build-up broken step corners or to resurface floor and walls, driveways and walks. Also use to set tile, flagstone and slate. BONDS ON provides a high-strength finish which is significantly stronger than a regular cement mix. Just add water and mix. Since BONDS ON includes a vinyl resin, no liquid bonding agents or additives are needed.

BONDS ON is a high-strength, multi-purpose, self bonding cement repair material for thin section repair and resurface, from 1/2 in to feather-edge, on concrete, stucco and masonry. Use to repair chipped, cracked or spalled concrete, to build-up broken step corners or to resurface floor and walls, driveways and walks. Also use to set tile, flagstone and slate. BONDS ON provides a high-strength finish which is significantly stronger than a regular cement mix. Just add water and mix. Since BONDS ON includes a vinyl resin, no liquid bonding agents or additives are needed.

SuperPatch is a two-component, multi-purpose, waterproofing mortar for patching, repairing or resurfacing concrete, masonry, stucco and brick, up to 1 in thickness in one application. Exact amount of powder and liquid are included in this container. Just mix the powder with liquid together in a clean container. SuperPatch is a non-shrink, unique formula with exceptional strength and adhesion for use on worn surfaces. It evens sticks to glass, steel, aluminum and wood, so is ideal for areas abutting these materials. Can be feather edged or applied up to 3 in thickness, using multiple layers. Ideal to anchor bolts, railings and other fixtures into concrete or to build-up worn or broken step corners without using forms. Use for vertical or horizontal, above or below grade patch and repair projects both inside and out. Will not cause acidic reaction with aluminum.

A Portland cement-based, quick-set, waterproof cement for setting bolts, hooks, fence posts, mail box posts, hand railings, wood, metal, plastic or other fixtures into concrete or masonry. It is a non-shrinking, high strength, weatherproof compound that sets in 30 min.

PC-Petrifier? rotted wood hardener repairs wood damaged by insects or rot. It is a liquid that is brushed, sprayed or injected into the pores of the wood. No mixing. Prepares wood for filling, priming and painting. Improve the hardness and minimize damaged wood removal. Water based formula allows for deep penetration.

FAMOWOOD? original wood filler has been the choice of professional woodworkers for over 70 years, it does not matter whether you are masking small or large defects, FAMOWOOD? can handle the job it spreads smoothly into cracks and holes, takes stains and paints evenly and resists cracking, ideal for any type of custom wood project.

ClarkDietrich 103 Deluxe? corner bead is used to provide a high-quality finish and solid protection at drywall corners. This traditional drywall finishing product is nailed, stapled, screwed or clinched into place. Flanges are deeply knurled and perforated for excellent joint compound adhesion. 103 Deluxe corner bead is considered the premier drywall finishing corner bead product. This product combines a unique manufacturing process, with specially enhanced galvanized steel to provide consistent, high-quality finishing each and every time.

PC-Rot Terminator? epoxy rotted wood hardener is for wood that has structural damage caused by insects or rot. The mixture of resin and hardener produces a low viscosity liquid that penetrates the distressed wood and cures hard. It is slow curing, allowing time for the liquid to deeply penetrate the wood. It has zero solvents or volatiles.

A non-shrink, high-strength waterproof mortar for concrete, masonry, brick, stone and stucco. Mix with water into a putty consistency. Sets in 3 to 5 mins to stop active water leaks and seepage under pressure through holes, cracks, wall-floor joints, swimming pools, water storage tanks, fountains, ponds and drains. Can be applied under water so pools do not have to be drained for crack repair. Also use to seal around pipe and to anchor hooks, bolts and metal to concrete. Does not contain metallic aggregates or corrosive agents. Will not shrink or oxidize. Wear eye protection, dust mask and rubber gloves.

"Dent-resistant reinforcement for finishing gypsum board corners in high abuse and moisture-prone areas. Size: 1-1/4"" x 1-1/4""."

Use to level and smooth interior concrete an other surfaces prior to the installation of ceramic tile and other floor coverings. Hardens quickly and can be walked on in 4 hrs, allowing tile to be installed in about 6 to 8 hrs. Covers 40 sq-ft. at 1/8 thickness.

DAP Plastic Wood? all-purpose wood filler is a high-quality, latex-based wood filler formulated to create a surface and body that looks and acts like real wood, it can be used to repair cracks, gouges, holes and other surface defects on furniture, woodwork, molding, cabinets, paneling, plywood, windows, doors and painted surfaces, this easy-to-use filler is low in odor and cleans up with water, the thick, knife-grade formula can be molded and sculpted making it ideal for corners, vertical and unsupported surfaces, it offers easy handling by spreading smoothly and evenly, when dry, DAP Plastic Wood? all-purpose wood filler can be sanded, cut, planed, drilled, nailed or screwed, stained and painted, it is shrink-, crack- and crumble-resistant and provides strong nail and screw anchoring, interior or exterior use.

Onetime? Patch & Prime? Spackling compound is a lightweight wall repair compound designed to accept premium paints without a primer. Product contains no asbestos, may be used inside or out and offers water cleanup. Formulation is designed not to crack or shrink and exhibits a very low-VOC content.

DAP Fast 'N Final lightweight spackling lets you patch and prime in one easy step, saving time and money. It dries fast with no need to sand or prime, letting you paint in minutes. It is easy to apply with one strike of the putty knife. Won't shrink or crack. Ideal for repairing holes, cracks and dents in drywall, plaster, wood and stucco. DAP Fast 'N Final lightweight spackling has a low-VOC content and is low in odor. Interior/exterior use.

Use for preparing substrates to accept flooring. For use as a patch, underlayment or embossing leveler. Use with almost any substrate. Fast setting. Ready for most floors in 1 to 2 hrs. Non-sanded formula trowels easily for a smooth finish. Non-shrinking. Reduces installation time. Exceeds 5000 psi compressive strength. Bonds to concrete, ceramic tile, quarry tile and terrazzo (except metal terrazzo strips), wood and wood underlayments, clean and abraded steel, stainless steel, brass and lead, primed poured-in-place gypsum subfloors and radiant-heated subfloors where the surface temperature does not exceed 85 deg F.

A premium premixed ready-to-use concrete patch, designed not to crack or shrink. Textured gray to blend with cementitious substrates, product is hard at cure and offers water clean up.

Minwax? Stainable wood filler is ideal for repairing cracks, small gouges, nail holes, knot holes and other defects in all types of unfinished indoor and outdoor wood surfaces.

Fill nail holes and imperfections. May be intermixed for desired shade. Stain (if necessary). Apply one finish coat of seal or varnish. Not recommended for table tops or floors.

Quikrete? Vinyl concrete patcher is a high-strength polymer-modified repair material for making thin structural repairs to concrete surfaces.

Use for filling and sealing cracks in concrete vertical or horizontal applications. Sanded acrylic formula. Weather resistant. Excellent adhesion and remains flexible. Matches the color and texture of concrete surfaces.

Homax? patented aerosol wall texture, color changing orange peel goes on blue for high visibility and easy pattern reproduction and then dries white to indicate the area is ready to paint. The low-odor, water-based formulation is ideal for the DIYer or professional doing punch list work in a large area. Adjustable nozzle applies fine to heavy orange peel textures.

Crack Patch? Premium acrylic spackling provides superior performance for filling dents, holes and cracks in surfaces such as drywall, plaster, wood, brick and stone. This pre-mixed formula spreads easily for fast, professional repairs to walls and ceilings and will not crumble or flake when used as directed.

DAP? Vinyl spackling is a ready mixed, easy-to-use patching material used to fill holes and cracks and treat surfaces prior to painting. The product has a smooth working consistency and sands easily, recommended for interior use only.

DAP? '33'? Window Glazing is a ready-to-use glazing compound that may be used for face glazing wood or metal sash. Its knife grade consistency allows for smooth, easy application. DAP? '33'? window glazing sticks tightly to glass and sash and resists sagging, shrinking and cracking.

DAP? Professional painter's putty is a smooth, easy working putty designed for the special needs of professional painters. It is ideal for filling small holes and cracks in interior or exterior surfaces such as baseboards, windowsills and woodwork. It has exceptional adhesion and resists oil bleeding. DAP? professional painter's putty may also be used to glaze wooden window sashes.

KwikWood is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood has a 15 to 25 min work life. After 60 min, it can be machined, drilled, tapped, sanded, filed and painted. Stronger than wood, KwikWood dries to a light tan color.

Quikrete? Vinyl concrete patcher is a high-strength polymer-modified repair material for making thin structural repairs to concrete surfaces.

ClarkDietrich 103 Deluxe? corner bead is used to provide a high-quality finish and solid protection at drywall corners. This traditional drywall finishing product is nailed, stapled, screwed or clinched into place. Flanges are deeply knurled and perforated for excellent joint compound adhesion. 103 Deluxe corner bead is considered the premier drywall finishing corner bead product. This product combines a unique manufacturing process, with specially enhanced galvanized steel to provide consistent, high-quality finishing each and every time.

With this revolutionary fabric patch, you simply cut, wet and press the Wet & Set? patch over the damaged area. It dries hard in minutes, forming a polymer adhesion that will never peel or delaminate. Stains, holes, cracks and crumbling damage disappear within seconds, replaced by a hard, permanent patch that's ready for a finish coat within 15 to 30 mins. Can be used on drywall, plaster, stucco and even wood.

LevelQuik? advanced acrylic primer/sealer that prepares surfaces for the application of LevelQuik? or LevelLite? self-leveling underlayments. It seals porous and non-porous surfaces and improves the bond of underlayments.

Concrete Silicone 2 sealant is a high-performance, 100% silicone and 100% waterproof sealant ideal for concrete, mortar and stone projects. This 30 min rain-ready formula is light gray in color and offers permanent flexibility and excellent durability with 10 year mold-free product protection to help resist mold and mildew growth. Backed by a lifetime assurance.

DAP? Vinyl spackling is a ready mixed, easy-to-use patching material used to fill holes and cracks and treat surfaces prior to painting. The product has a smooth working consistency and sands easily, recommended for interior use only.

FibaTape? Perfect Finish? is an ultra-thin, fiberglass mesh drywall tape. Made with a 30% thinner profile, Perfect Finish requires the use of less compound resulting in quicker sanding and finishing. The ideal finishing tape for the DIY?er.

PL? S20 polyurethane self-levelling concrete crack masonry sealant is a professional-grade sealant for concrete. It is a one-component, polyurethane, self-leveling sealant for contraction or expansion joints and cracks in concrete floors and decks. It cures in place to form a highly resilient and abrasion-resistant seal, which resists deterioration caused by weather, stress, movement, traffic and water. Its abrasion and tear resistance makes it ideally suited for applications exposed to pedestrian and vehicular traffic.

Sixteen colors in jars. Color card and conversion chart included.

Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors.

DAP? wallboard joint compound is a ready-to-use joint compound for smooth, high quality finishing of gypsum panel joints. It is preferred by professionals for embedding reinforcing tape, finishing gypsum panel joints, nail heads and metal corner beads. DAP? wallboard joint compound has minimal shrinkage and is crack-resistant. It is ideal for textured finishes.

Homax? popcorn ceiling scraper is a specially designed scraping tool that removes unwanted popcorn ceiling texture. It features a unique bag attachment captures texture as it is removed, so the texture falls into a bag not on the floor. Designed to protect and prevent ceiling from gouges. It has a 12 in blade. Simply connect the ceiling scraper to any standard extension handle. A typical 10 ft x 10 ft ceiling can be completed in 30 min or less.

Applied with standard caulking gun for tuck-pointing and sealing mortar joints in brick or block surfaces and for repairing cracks in concrete or block walls. Square applicator tip designed for mortar joints.

DAP? DryDex? Spackling provides a unique dry time color indicator that verifies when the patched surface is dry and ready to be sanded and painted, thus providing a smoother finished surface in a shortened amount of time. DAP? DryDex? spackling may be used to fill holes and cracks in surfaces such as drywall, plaster, wood, brick and stone. Its ready-to-use formula spreads easily for fast, professional repairs that will not crack, crumble or flake. DryDex? dries hard, sands easily and can be painted.

Minwax? Stainable wood filler is ideal for repairing cracks, small gouges, nail holes, knot holes and other defects in all types of unfinished indoor and outdoor wood surfaces.

Repairs damaged walls and ceilings. Works in high traffic areas. Holds galvanized metal drywall patch during repair. Provides thermal barrier. Heavy duty, superior strength.

Bondo? wood filler is a permanent, fully paintable repair material for a broad range of projects inside and outside the home, ideal for almost any wood surface, the two-part wood filler forms a permanent bond and will not shrink, it cures fast, in as little as 15 mins it can be easily sanded by hand or power tools, Bondo? wood filler is suitable for staining or painting in only 25 mins.