Henry TileFlex? Plus? thinset mortar is a Portland cement-based, polymer-modified, thinset mortar for the installation of porcelain, quarry, non-moisture sensitive stone, ceramic and mosaic tile over most interior and exterior surfaces. Henry TileFlex? Plus can also be used to install tile over exterior-grade plywood floors.

Henry TileFlex? Plus? thinset mortar is a Portland cement-based, polymer-modified, thinset mortar for the installation of porcelain, quarry, non-moisture sensitive stone, ceramic and mosaic tile over most interior and exterior surfaces. Henry TileFlex? Plus can also be used to install tile over exterior-grade plywood floors.

Low-sheen, protective finish and surface sealer for saltillo, terra-cotta, quarry tile, slate and flagstone. Seals the surface to resist stains, dirt and grease. Beautifies and enhances color while providing scuff, mar and scratch resistance. This acrylic, water-based finish has low-odor and will not yellow with age.

A Portland cement-based patch and skim coat that provides a smooth, permanent finish on a wide range of surfaces prior to the installation of floor coverings.

A ready-to-use adhesive and grout, specially formulated for the installation of quarry, ceramic and mosaic tile on walls.

White dry non-sanded grout is formulated for grouting porous floor and wall tiles with joints up to 1/8 in wide. Ideal for use with glazed tile and polished marble that can be scratched by sanded grout. It can be used for interior and exterior applications.

A ready-to-use elastomeric waterproofing membrane for both commercial and residential tile and stone application. Suited for interior and exterior??substrates, REDGARD??? creates??a??continuous waterproof membrane barrier with outstanding adhesion and reduces crack transmission in tile and stone floors. It bonds directly to clean metal drains, PVC, stainless steel and ABS drain assemblies and can be used as a slab-on-grade moisture vapor barrier under all types of floor coverings.

Provides unsurpassed invisible protection for marble, stone, porcelain, quarry and saltillo tile, grout, concrete and masonry. This long-lasting, water-based sealer actually repels dirt, oil and stains allowing for easy cleanup. Use when maximum protection is required such as in food preparation areas, floors and other high traffic areas. Can also be used in place of a grout release prior to grouting to prevent grout staining and facilitate grout cleanup. Low-odor, pH neutral and non-abrasive. Allows moisture vapor transmission.

Henry? 425 TileFlex? thinset mortar is a Portland cement-based, polymer modified thinset mortar for the installation of quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Henry 425 TileFlex? can also be used to install porcelain tile over interior absorbent concrete surfaces.

Henry TileFlex? Plus? thinset mortar is a Portland cement-based, polymer-modified, thinset mortar for the installation of porcelain, quarry, non-moisture sensitive stone, ceramic and mosaic tile over most interior and exterior surfaces. Henry TileFlex? Plus can also be used to install tile over exterior-grade plywood floors.

Henry TileFlex? Plus? thinset mortar is a Portland cement-based, polymer-modified, thinset mortar for the installation of porcelain, quarry, non-moisture sensitive stone, ceramic and mosaic tile over most interior and exterior surfaces. Henry TileFlex? Plus can also be used to install tile over exterior-grade plywood floors.

Henry? 425 TileFlex? thinset mortar is a Portland cement-based, polymer modified thinset mortar for the installation of quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Henry 425 TileFlex? can also be used to install porcelain tile over interior absorbent concrete surfaces.

A unique grouting composition that provides professional quality with Do-It-Yourself ease. Premixed tile grout is formulated to a user-friendly consistency and is acrylic based for improved durability.

A unique grouting composition that provides professional quality with Do-It-Yourself ease. Premixed tile grout is formulated to a user-friendly consistency and is acrylic based for improved durability.

Premium polymer-modified, Portland cement-based grout for grouting porcelain, glass, quarry, stone, ceramic and mosaic tile for interior and exterior floors, walls and countertops. Stain-resistant, highly flexible and water resistant.

511 Kleen and reseal is a unique formula designed to remove dirt and soil from natural stone and tile, including vanities, showers and furniture and reseals in one easy step. Kleen and reseal will cut through dirt and soil with no rinsing, no streaking and no soapy residue left behind. 511 Kleen and reseal is safe for all types of surfaces.

Tile and stone cleaner is a concentrated pH neutral cleaner designed for all surfaces. Strong enough for the professional, yet gentle enough for the do-it-yourself specialist. Tile and stone cleaner is a nontoxic cleaner that can handle the most difficult stains, yet is gentle enough for everyday use.

The safe, easy way to maintain beautiful tile areas by covering up stubborn stained grout! much easier to use than traditional grout colorants, MIRACLE grout pen markers dry rapidly and leave a clean, uniform grout line without harsh chemicals and is completely odorless - no fumes.

The safe, easy way to maintain beautiful tile areas by covering up stubborn stained grout! much easier to use than traditional grout colorants, MIRACLE grout pen markers dry rapidly and leave a clean, uniform grout line without harsh chemicals and is completely odorless - no fumes.

511 spray-on grout sealer is a unique formulation designed for the protection of all types of grout both new and old. 511 spray-on grout sealer penetrates into the surface and forms an invisible barrier that is resistant to moisture and stains, while allowing vapor to escape. 511 spray-on grout sealer can be applied to freshly installed grout as quickly as 2 hrs after grouting. 511 spray-on grout sealer is UV-transparent and will not yellow under any circumstances. Due to the differences of each grout, several inconspicuous test patches should be completed to assure maximum performance.

511 impregnator is the original penetrating sealer designed for the protection of all medium to dense porous surfaces. 511 impregnator forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 impregnator is not a surface coating and will not alter the natural look. All surfaces treated are harder and less slippery.

511 Impregnator is the original penetrating sealer designed for the protection of all medium to dense porous surfaces. 511 Impregnator forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Impregnator is not a surface coating and will not alter the natural look. All surfaces treated are harder and less slippery.

Offers economy with good bond strength for most tile projects and is recommended for floor installations. Good for setting Saltillo and other similar clay pavers as well as offers good working time to apply and adjust tiles. Use this Admix when bonding dense tiles (porcelain and glass) or setting over Exterior-Grade Plywood (EGP), existing tile and for exterior applications.

Offers economy with good bond strength for most tile projects and is recommended for floor installations. Good for setting Saltillo and other similar clay pavers as well as offers good working time to apply and adjust tiles. Use this Admix when bonding dense tiles (porcelain and glass) or setting over Exterior-Grade Plywood (EGP), existing tile and for exterior applications.

A professional formula, all-purpose mortar, polymer-modified to provide good bond strength for floor and tile projects. VersaBond? cures quickly even in cold climates and adheres to most surfaces, exceeding ANSI A118.4 and A118.11 without the need for additives.

Cement board is a rigid substrate made of Portland cement, aggregate and glass mesh that provides an exceptionally hard, durable surface that is able to withstand prolonged exposure to moisture.

A liquid polymer designed to be used in place of water to increase performance of cement mortar beds, non-modified, thin-set mortars and cement-based grouts. It improves working characteristics and performance of cement-based mixes to boost water resistance, shock resistance and freeze-thaw capabilities for tile, stone or masonry installations. Increases performance of non-modified thin-set mortars for setting dense tile and setting over hard-to-bond surfaces. This Admix can be used with non-modified, thin-set mortars such as Custom Blend? thinset mortar, coupling mat mortar as well as with Saltillo grout mix.

Bonds porcelain, stone, marble, granite and ceramic tile up to 18 in x 18 in. For interior wall and floor installations. Exceeds ANSI A136.1 Type I. Covers 20 to 50 sq-ft depending upon the size of trowel and tile.

A premium quality, polymer-modified mortar for any size natural stone or large format ceramic or porcelain tile 15 in (38 cm) or larger on one or more sides, clay pavers or other thin or medium bed applications. With a non-slumping formula that reduces the chance for lippage and promotes level tile installations, Custom's natural stone & large tile mortar can be applied for horizontal applications as thick as 3/4 in (19 mm) or for thin bed applications to 1/4 in (6 mm).

A pre-mixed, ready-to-use, mild acid solution. Removes dried Portland cement grout haze and mortar residue from tile, concrete and masonry. Safe for use on colored grouts. Removes hard water deposits, efflorescence and also etches concrete.

A no-mix, no-mess alternative to traditional thin-set mortars spreads quickly and easily. Recommended to bond porcelain, stone, marble, granite and ceramic or porcelain tile up to 8 in x 8 in. Can be used with tile with one side up to 15 in, but dry time significantly increases.

A bright-white grout for new tile installation or repair that is waterproof when dry. It mixes to a smooth paste and can be used to set ceramic fixtures or tiles or seal around tubs, showers and sinks. Tile grout will not crack or shrink after setting. It sets up quickly and stays white and hard.

White dry non-sanded grout is formulated for grouting porous floor and wall tiles with joints up to 1/8 in wide. Ideal for use with glazed tile and polished marble that can be scratched by sanded grout. It can be used for interior and exterior applications.

Tile Guard? penetrating grout sealer seals and protects grout against stains from water and oil-based liquids. Penetrating below the surface, it provides stain protection while also allowing moisture to escape so it can be used 2 weeks after grouting.

Cuts through soil and hard water build-up. Non-abrasive, Non-acidic formula breaks down soap scum and greasy build-up on tile and grout. Cleans all non-porous surfaces.

The silicone grout sealer seals grout lines for better water-resistance and minimizes dirt penetration. The easy-to-use, water-based silicone will protect the grout lines for up to 5 years.

A unique grouting composition that provides professional quality with Do-It-Yourself ease. Premixed tile grout is formulated to a user-friendly consistency and is acrylic based for improved durability.

A professional formula, all-purpose mortar, polymer-modified to provide good bond strength for floor and tile projects. VersaBond? cures quickly even in cold climates and adheres to most surfaces, exceeding ANSI A118.4 and A118.11 without the need for additives.

Cement board underlayment is a rigid substrate made of Portland cement, aggregate and glass mesh that provides an exceptionally hard, durable surface that is able to withstand prolonged exposure to moisture.

This grout sealer is composed of silicon and seals your tile's grout for better water resistance. Whether you're considering your garden's tiled birdbath or your shower, both need their grout protected from extreme moisture. This sealer provides excellent water protection and works against dirt penetration. Mold and mildew stains are not attractive in your bathroom or your birdbath. This easy-to-use silicon sealer will protect your grout from moisture damage inside and out.

A premium quality, polymer-modified mortar with exceptional flexibility and bond strength for tiling difficult surfaces, such as plywood, vinyl and laminates and for hard-to-bond, nonporous tile, such as porcelain and glass.

Polymer-modified mortar for time-critical installations such as restaurants, malls and hotel lobbies. Excellent for cold temperature installations. Grout in 2 hrs, allows traffic in six hrs.

Premium polymer-modified, Portland cement-based grout for grouting porcelain, glass, quarry, stone, ceramic and mosaic tile for interior and exterior floors, walls and countertops. Stain-resistant, highly flexible and water resistant.

Grout cleaner and whitener cleans even the dirtiest grout lines on kitchen, bathroom and ceramic tile floors with little or no scrubbing. The product also removes rust stains from concrete. Its bleach-free, professional-strength formula makes it safe for use on floors with colored grout.

Bonds ceramic tile up to 18 in x 18 in. For interior wall and floor installations. Exceeds ANSI A136 Type I. Covers 20 to 50 sq-ft depending upon the size of trowel and tile.

A ready-to-use, everyday cleaner formulated to effectively clean and maintain the natural beauty of your stone. Marble, travertine, limestone and slate are medium-density stones that are susceptible to acids and oily foods that cause etching and staining. It contains Aqua Mix? Sealer in its formula to reseal as it cleans, applying a thin coat of sealer every time you clean. Its formula is non-acidic so it will not harm your stone or grout.

A premium, no-sheen, enhanced-look, 100% polymer-solid, penetrating sealer formulated to darken, enrich and highlight the character and beauty of unsealed natural stone. May also be used as a pre-grouting sealer. Allows moisture vapor transmission. It also effectively seals and darkens the color of grout joints.

Bonds ceramic tile up to 18 in x 18 in. For interior wall and floor installations. Exceeds ANSI A136 Type I. Covers 20 to 50 sq-ft depending upon the size of trowel and tile.

Concentrated crystals that mix with water to make a mild, safe to use, acid cleaner. Removes dried Portland cement, grout haze and mortar residue from tile, concrete and masonry. Safe for use on colored grouts. Removes hard water deposits, efflorescence and also etches concrete.

Color enhancer and penetrating sealer for all types of porous natural stone and grout. Rejuvenates the color and appearance of worn, faded stone, tumbled-marble and other rustic-look stones. Can also be used to darken the color of grout. Provides long-lasting protection against oil, grease and stains. Its water-based, low-odor formula can be used for interior and exterior use.

Economical, easy-to-apply, penetrating sealer that resists most common oil-based and water-based stains. It will not leave a difficult-to-remove residue on the surface. Low-odor, water-based formula.

A ready-to-use, everyday cleaner formulated to effectively clean and maintain the natural beauty of your stone. It contains an Aqua Mix? Sealer in its formulation to reseal as it cleans, applying a thin coat of sealer every time you clean. Its formula is non-acidic so it will not harm your stone or grout.

Polymer-modified, non-sanded Portland cement dry grout used for joints up to 1/8 in wide. Excellent for highly glazed ceramic tile or highly-polished marble or natural stone that can be scratched by sanded grouts. It's non-shrinking and durable.

A professional formula, all-purpose mortar, polymer-modified to provide good bond strength for floor and tile projects. VersaBond? cures quickly even in cold climates and adheres to most surfaces, exceeding ANSI A118.4 and A118.11 without the need for additives.

High-gloss, protective finish and surface sealer for saltillo, terra-cotta, quarry tile, slate and flagstone. Seals the surface to resist stains, dirt and grease. Beautifies and enhances color while providing scuff, mar and scratch resistance. This acrylic, water-based finish has low-odor and will not yellow with age.