Fit standard lamp stems.

Fit standard lamp stems.

Fit standard lamp stems.

Fit standard lamp stems.

Fit standard lamp stems.

Fit standard lamp stems.

Fit standard lamp stems.

Fit standard lamp stems.

Fit standard lamp stems.

Fit standard lamp stems.

Fit standard lamp stems.

Fit standard lamp stems.

Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 W, 125 V. Use only with #16 or #18 AWG stranded copper wire.

Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 W, 125 V. Use only with #16 or #18 AWG stranded copper wire.

Provides overhead lighting and supports reflector glass. Includes the canopy, two-bulb cluster socket with 18 AWG pre-wired 8 in insulated leads, rated 250 V for use with 2 light bulbs, 50 W maximum, 4 in offset crossbar, two 8-32 x 1/2 in mounting screws, two 1/8 IP rubber washers and a lock-up cap with brass finish.

Jandorf Socket, Base Type: Medium E26, 250 V, Wattage Rating: 660 W, Housing Material: Porcelain, Matte

Jandorf Lamp Socket, Base Type: Medium E26, 600 V, Wattage Rating: 660 W, Housing Material: Porcelain, Matte, White

Jandorf Lamp Socket, Base Type: Medium E26, 600 V, Wattage Rating: 660 W, Housing Material: Porcelain, Matte, White

Jandorf Bottom Turn Knob Lamp Socket, Base Type: Medium E26, 250 V, Wattage Rating: 250 W, Housing Material: Porcelain, Matte, White

Jandorf Lamp Socket, Base Type: Medium E26, 250 V, Wattage Rating: 660 W, Wire Size: 18 AWG, Housing Material: Porcelain, Matte, White, Dimensions: 8 in

Jandorf Fixture Socket, Keyless, Base Type: Medium E26, 250 V, Wattage Rating: 660 W, Housing Material: Porcelain, Matte, White

Jandorf Fixture Socket, Base Type: Medium E26, 250 V, Wattage Rating: 660 W, Housing Material: Porcelain, Matte, Ivory

Wire leads, 75 W, 125 V.

Wire leads, 75 W, 125 V.

Molded of thermoset plastic.

With 6 in, 18 AWG wire leads. 660 W, 250 V.

With 6 in, 18 AWG wire leads. 660 W, 250 V.

With 6 in, 18 AWG wire leads. 660 W, 250 V.

With 6 in, 18 AWG wire leads. 660 W, 250 V.

With 6 in, 18 AWG wire leads. 660 W, 250 V.

With 6 in, 18 AWG wire leads. 660 W, 250 V.

Molded of thermoset plastic.

Molded of thermoset plastic.

Molded of thermoset plastic.

Molded of thermoset plastic.

Molded of thermoset plastic.

Molded of phenolic.

Molded of thermoset plastic. 75 W, 125 V.

Molded of thermoset plastic. 75 W, 125 V.

Molded of thermoset plastic. 75 W, 125 V.

Molded of thermoset plastic. 75 W, 125 V.

Molded of thermoset plastic. 75 W, 125 V.

Molded of thermoset plastic. 75 W, 125 V.

Transform existing recessed lighting into a pendant or light fixture. Hang any pendant or light fixture of 50 lb or less where you currently have recessed lighting. Adjusts to any fit can size between 4 in and 6 in. No visible screws or hardware and the decorative medallion can be painted. Works with existing recessed cans that use medium base PAR16, R16, A19, R20, PAR20, BR25, BR30, R30, PAR30, BR38, PAR38, BR40 or R40 light bulbs and is suitable for damp locations. Includes adjustable bar, socket adapter, mounting bar, round metal plate, decorative medallion and hardware. Can be used on sloped ceilings up to 45 deg. 1.46 in H x 6 in Dia. ETL Listed.

Crossbar for mounting light fixtures.

Crossbar for mounting light fixtures.

Crossbar for mounting light fixtures.

Crossbar for mounting light fixtures.

Jandorf Clip-On Lamp Shade Adapter, Fixture Finish: Brass

Crossbar for mounting light fixtures.

Crossbar for mounting light fixtures.

Crossbar for mounting light fixtures.

Crossbar for mounting light fixtures.

Used for holding lamp parts in place. Contains three brass-plated 8/32 in x 1/2 in knurled head screws, nickel-plated 8/32 in x 1/2 in knurled head screws and brass-plated 8/32 in x 3/4 in knurled head screws and two brass-plated 8/32 in x 1 in slotted machine screws and brass-plated 8/32 in x 2 in slotted machine screws.

Decorative piece used for hanging fixtures. 1/8 IP brass finish.

Decorative piece used for hanging fixtures. 1/8 IP brass finish.

For repairing or making lighting fixtures and lamps.

For repairing or making lighting fixtures and lamps.

Decorative highlight to cover opening. Contains 12 assorted check rings for 1/8 in IP lamp nipples.

Used for mounting drop fixtures.

Used for mounting drop fixtures.

Used for mounting drop fixtures.

Used for mounting drop fixtures.

Used for mounting drop fixtures.

Decorative loop that secures 1-1/16 in center hole canopy. 1/4 IP.

Secures lamp shade to harp.

Secures lamp shade to harp.

Secures lamp shade to harp.

Secures lamp shade to harp.

Secures lamp shade to harp.

Secures canopy or blank up to crossbar. 8/32 thread, 3/8 in Dia solid brass.

Secures center mount glass shade to ceiling fixture. Kit contains (1) 1-1/8 in check ring, (1) lock-up cap 1/8 IP, 1 - 1/8 IP x 1 in OD rubber washer white.

Secures center mount glass shade to ceiling fixture. Kit contains (1) 1-1/8 in check ring, (1) lock-up cap 1/8 IP, 1 - 1/8 IP x 1 in OD rubber washer white.

Jandorf Lock-Up Cap, Specifications: 1/8 in IP Thread, Nickel

Jandorf Lock-Up Cap, Specifications: 1/8 in IP Thread, Brass

Holds connecting parts in place.

Holds connecting parts in place.

Holds connecting parts in place. Contains two each 1/4-27 knurled locknuts, 1/8 IP knurled locknuts, 1/4 IP knurled locknuts, 8/32 battery nuts and four 1/8 IP hex nuts.

Holds connecting parts in place.

Connects nipples of different sizes.

Turns lamp on and off. Socket keys and 1/2 in extensions, 4/36 F x 4/36 M.

Jandorf Lock-Up Cap, Specifications: 1/8 in IP Thread, Plastic, Brass

Jandorf Lock-Up Cap, Specifications: 1/8 in IP Thread, Plastic, White

Connects nipples of different sizes.

Decorative piece that connects nipples of different sizes together.

Decorative piece that connects nipples of different sizes together.

Connects nipples of different sizes.

Connects nipples of different sizes.

Connects nipples of different sizes.

Decorative piece that connects nipples of different sizes together.

Turns lamp on and off. Includes 2 socket knobs, black, 2-1/2 in extensions, 4/36 F x 4/36 M with brass finish.

Raises lamp shade. 1/4-27 thread.

Raises lamp shade. 1/4-27 thread.

Secures lamp shade to harp.

Secures lamp shade to harp.

Secures lamp shade to harp.

Secures lamp shade to harp.

Secures lamp shade to harp. Contains one 1-1/2 in acorn finial with a 1-1/8 in M to 1/4-27 F reducer.

Secures lamp shade to harp. Contains one 1-1/2 in acorn finial with a 1-1/8 in M to 1/4-27 F reducer.

Provides overhead lighting and supports glass shade. Includes one glass shade holder with 18 AWG pre-wired 6 in insulated leads, ground wire and insulation brass finish, one 4 in offset crossbar, two 8-32 x 1/2 in mounting screws, two 8-32 x 2 in mounting screws, one grounding screw and three knurled screws, brass finish. Rated 250 V for use with 60 W lamp maximum.