Raised gang box device cover used in finish wall applications to mount switches or receptacles. Raised 3/4 in for commercial wall applications. Additional keyholes allow device covers to also fit next smaller box (example: A 4-gang cover will fit a 3 or 4 gang box). 10-11/16 in x 4-1/2 in x 3/4 in.
The Carlon handy box is a non-metallic switch and outlet box specifically designed for use with non-metallic conduit systems and non-metallic sheathed cabling. Unlike metal boxes, the Carlon handy box has two integral cable clamps. These clamps hold non-metallic cable firmly in place without the need for separate clamps, simply push the wire into the clamp opening and the cable is held securely in place. The Carlon handy box also comes with six 1/2 in knockouts on the sides and back for easier wiring and a variety of mounting options.
Raco Box Cover, Square, Number of Gangs: 1, Steel, Gray, 5/8 in L, 4 in W, 4 in H, Slot Mounting, Suitable for: Switch, 1.719 in Dia Receptacle, Includes: Hardware
Raco Receptacle, Square, Hole Diameter: 2.141 in, Number of Gangs: 1, Steel, Galvanized, Silver, 0.563 in L, 4.69 in W, 4.69 in H, 2-9/64 in Dia, Surface Mounting, Suitable for: 30 to 50 A Receptacles, Includes: Captive Screws, Rounded Corners
Used to mount switch or receptacle on box in surface mount applications. Raised 1/2 in. For one 30 to 60 A, single receptacle 2-5/8 in Dia. 10.3 cu-in. UL listed.
Fits Carlon single gang FS boxes. Paintable surface with textured finish to hide scratches. Stainless steel mounting screws and gasket included. UL, CSA listed.
Used to mount switches or receptacles on boxes in surface mount applications. Raised 1/2 in. For one 30-50 A, single receptacle, 2-9/64 in Dia. 6-1/2 cu-in capacity. 4 in square. UL listed.
Orbit Industries round covers are used to cover and protect wires in the box. Orbit Industries offers a variety of designs to accommodate many types of electrical devices. Selected models are raised, with open covers and ears.
Orbit Industries 4 in square (4S) covers are used to cover and protect wires inside the box. They are constructed from 16 ga galvanized steel. Selections include flat covers with various knockouts or raised covers for a range of lighting fixtures and other devices.
Orbit Industries round covers are used to cover protect wires. It is constructed from 16 ga galvanized steel. Orbit's selection includes variety types of covers for many devices.
UV resistant, suitable for outdoor use. For use in wet or damp locations, UL Marine Listed. Non-metallic, non-corrosive, will not rust or fade. Fits two gang metallic and non metallic boxes. Includes stainless steel mounting screws and gasket. UL Listed.
Two device switch box cover. Made from unpainted, pregalvanized steel. Used with 2-toggle, 2-gang switch boxes. UL 514-A Listed, File E195978/CSA Listed, File LR-1082.
The Carlon handy box is a non-metallic switch and outlet box specifically designed for use with non-metallic conduit systems and non-metallic sheathed cabling. Unlike metal boxes, the Carlon handy box has two integral cable clamps. These clamps hold non-metallic cable firmly in place without the need for separate clamps, simply push the wire into the clamp-opening and the cable is held securely in place. The Carlon handy box also comes with six 1/2 in knockouts on the sides and back for easier wiring and a variety of mounting options.
The Carlon handy box is a non-metallic switch and outlet box specifically designed for use with non-metallic conduit systems and non-metallic sheathed cabling. Unlike metal boxes, the Carlon handy box has two integral cable clamps. These clamps hold non-metallic cable firmly in place without the need for separate clamps, simply push the wire into the clamp-opening and the cable is held securely in place. The Carlon handy box also comes with six 1/2 in knockouts on the sides and back for easier wiring and a variety of mounting options.
The Carlon handy box is a non-metallic switch and outlet box specifically designed for use with non-metallic conduit systems and non-metallic sheathed cabling. Unlike metal boxes, the Carlon handy box has two integral cable clamps. These clamps hold non-metallic cable firmly in place without the need for separate clamps, simply push the wire into the clamp-opening and the cable is held securely in place. The Carlon handy box also comes with six 1/2 in knockouts on the sides and back for easier wiring and a variety of mounting options.
