For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.

Rated for 600 V copper only. Single hole lugs, easy to install with screwdriver, wrench or pliers. 3/8 in bolt size.

Scotch? Tape 2242 is a linerless 30 mil thick, general-purpose, electrical rubber tape that's suitable for bus bar insulation and moisture sealing of cable ends. The high-voltage, flame-retardant tape ensures excellent tacking with its self-fusing, ethylene propylene rubber resin adhesive.

Replaces both red and yellow wing style connectors. Red with yellow skirt. Maximum operating temperature is 221 deg F. 600 V maximum. 22 AWG minimum wire gauge, 8 AWG maximum wire gauge. UL, CE, IEC and CSA agency approved.

Can shoot 3 size coverings, NM, Coax, voice/data and low volt staples from the same gun without any adjustments. Cable guide for continuous stapling. Ergonomic design, high impact plastic construction. Can use MPS-2080, 5/16 in blue staples, SKU 655.8894, MPS-2100 3/8 in white staples, SKU 055.9039 and PS-2125V 1/2 in black staples, SKU 574.6821.

Gardner Bender's patented double lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes, wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented Double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "Slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening.

Service entrance cable strap or staple designed for securing larger sized electrical cable onto wood surfaces. Stabilized polyethylene saddle withstands both extreme cold and UV rays without cracking or deteriorating. Designed to cradle and protect delicate cable insulation during installation. Zinc-plated nails resist rust and corrosion and recess fully into the strap to eliminate snags. Secures NO 6 SER service entrance cable. Assembled in USA with components from USA and China.

Closed end connectors are ideal for making a simple connection of two or more wires to create a pigtail connection. The pigtail connector is a closed end, crimp on wire connector used to secure electrical connection points. The proper installation method is to connect the wires together first and then add a pigtail connector and crimp tight to provide a safe, secure and stable connection particularly in applications subject to vibration. Designed to be used with both solid and stranded wire these closed end connectors feature a tin-plated seamless copper sleeve with translucent nylon insulation. Connector rated for #22 to #10 AWG applications up to 300 V.

3M? secure grip wire connectors are designed to give you dependable performance for a wide range of residential and commercial wiring jobs. An internal, insulated spring delivers a powerful grip for secure, solid connections that are made to last. The slip-resistant ridges and straight wing design make installation fast, simple and easy on fingers.

Nylon insulated, color-coded spring connectors. Features a live spring for a tight grip. Has wings on bottom for easy torquing.

Includes 20 ring terminals, 10 spade terminals, seven female disconnects, five male disconnects and six butt splices, in a compartmentalized case.

These multi-range hex head connectors cover 95% of everyday applications making them the simple choice for all of your wire connection needs. Don't worry about using a hex tool to install, you can't over-torque this connector because it's patented hex-head design strips out at UL torque saving the wires and your fingers. Inside the connector a zinc-plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long-lasting strength and resists chemicals while the deep skirt supports smooth wire entry and coverage of stripped wires.

For easy crimp splicing. Insulated copper conductor rated to 600 V maximum. Temperature rating of 167 deg F maximum. Clamshell package. cULus Listed.

These copper split bolt connectors have all copper alloy construction for high mechanical strength, maximum conductivity and low resistance.

Insulated staples protect and secure NM, BX and UF. PVC insulation protects cable from damage due to mis-hit and overdriving, prevents a short circuit if wire insulation is damaged. Highly visible color coded for size and application. 40 per card.

Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 3/4 in (19 mm) Dia.

Quickly installed over entire length of wire run. Excellent for under hood and trailer wiring.

Compact size to fit in pocket, safety lock to prevent accidental ignition.

Gardner Bender wire connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB Wire Connectors offer world-class quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and do it yourselfers myriad packaging options, ergonomic designs and wire ranges. Easy and fast to use, just strip and push conductors into PushGard connectors to make reliable, secure connections.

Resists water, oils, alkalies, acids, weather, ultraviolet rays, abrasion, corrosion and moisture. Use as a primary insulation for wide cable splices up to 600 volt, for fixture and wire splices up to 1000 volt and to maintain electrical and high temperature integrity of electrical systems. 7 mil, UL Approved and CSA Certified.

Gardner Bender wire connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB wire connectors offer world-class quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and do it yourselfers myriad packaging options, ergonomic designs and wire ranges. Easy and fast to use, just strip and push conductors into PushGard connectors to make reliable, secure connections.

Heavy-duty zip ties are hard-wearing and designed for rugged industrial, automotive and farm applications demanding high levels of tensile strength and large bundle diameters. Permanently secured until you cut them off GB ties lock tight without stretching or sliding. The thick nylon 6/6 material and patented one-piece, injection-molded construction eliminates failure due to parts working loose or breaking off. Raised ridges on the cable ties bent tips are designed to provide a secure grip while requiring minimal effort to close and the strong locking head ensures the increased tensile strength you need. Ideal for ducts, temporary fencing, heavy equipment and vibration prone areas in both electric and non-electric applications, including home repairs, remodeling, kitchen or bathroom renovations in residential and commercial locations. When you've got a big job that demands a strong tie able to handle a large bundle diameter then count on Gardner? Bender heavy-duty cable ties.

Quick and reliable crimp-type wire connections. Vinyl insulated shank with 0.250 in x 0.032 in tab. 75 deg C temperature rating.

Scotch? Super 33+ vinyl electrical tape offers the highest quality available. Long-lasting with superior adhesion and handling in a wide range of temperatures and conditions. Scotch? Super 33+ vinyl electrical tape provides flexibility and easy handling for all around performance.

Secures wire and cable in industrial, auto or marine and where vibrations may occur. Built-in screw hole for mounting to multiple surfaces.

This thin-wall, polyolefin heat shrink tubing is great for cable insulation, marking and bundling with superior mechanical, abrasion and moisture protection.

Gardner Bender wire connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB wire connectors offer world class quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and do it yourselfers myriad packaging options, ergonomic designs and wire ranges. Easy and fast to use, just strip and push conductors into PushGard connectors to make reliable, secure connections.

Nylon fully insulated, rated at 600 V. 0.250 in x 0.032 in tab. 105 deg C temperature rating. Card contains male and female disconnects.

WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.

Gardner Bender wire connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB wire connectors offer world-class quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and Do-It-Yourselfers myriad packaging options, ergonomic designs and wire ranges.

These Gardner Bender #6 service entrance cable straps 5 pack secure cable and are designed for recessed nail heads when the strap is fully driven into wood.

Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 V maximum in building wire and at 1000 V maximum in lighting fixtures and luminaries. Copper-to-copper connections only.

Heavy-duty zip ties are hard-wearing and designed for rugged industrial, automotive and farm applications demanding high levels of tensile strength and large bundle diameters. Permanently secured until you cut them off GB ties lock tight without stretching or sliding. The thick nylon 6/6 material and patented one-piece, injection-molded construction eliminates failure due to parts working loose or breaking off. Raised ridges on the cable ties bent tips are designed to provide a secure grip while requiring minimal effort to close and the strong locking head ensures the increased tensile strength you need. Ideal for ducts, temporary fencing, heavy equipment and vibration prone areas in both electric and non-electric applications, including home repairs, remodeling, kitchen or bathroom renovations in residential and commercial locations. When you've got a big job that demands a strong tie able to handle a large bundle diameter then count on Gardner? Bender heavy-duty cable ties.

This ProSource electrical tape is UL approved black electrical insulating tape. It's 30 ft L with a PVC backing.

Vinyl insulated shank with 0.250 in x 0.032 in tab. 75 deg C temperature rating.

For snap-in splicing of low-voltage AWG wire without prior stripping. 75 deg C temperature rating. Clamshell.

Use and reuse these releasable cable ties to temporarily fasten wires, cables and hoses. Cable management ensures neat, clean and easy to manage installations of various sizes of wire, cable or even conduit and hoses. Bundling and identifying wires also reduces the chance for tripping or snagging a wayward cable and damaging valuable equipment. Plastic zip ties are one of the least expensive and easiest to use cable management devices. Simply wrap the tie around a cable bundle, feed the tail into the head and pull it tight. These ties have the added benefit of being reusable with a small latch on the head that releases the locking mechanism, allowing you to pull out the tail, add another cable to the bundle, then tie it back up again.

Fastens wires, cables, hose and ducts. Flexible nylon material is usable in temperatures from -40 to 185 degrees Fahrenheit. Assortment of 100 four inch and 100 eight inch ties.

Good abrasion resistance, used for protection for electrical tape splices and connectors. Made in the USA. UL approved.

The essential silicone protect and repair tape. Repair tape, another innovation from Gardner Bender, can save the day during emergency repairs. Easier than heat-shrink, cleaner than plumbers' putty and more flexible than a vice grip, repair tape is a household necessity. Add it to the tool box, the workshop shelf and the "junk-drawer" for emergency repairs and maintenance projects. Stretch, wrap and protect or repair everything from leaky hoses, pipe insulation, electrical connections, tool handles, air ducts and cord/rope ends.

3M? DBO/B-6 series direct bury splice kit electrically connects 2 or more pre-stripped copper wires and moisture seals the connection for direct-burial applications. The kit seals the wiring that is rated up to 600 V. It is suitable for water-intensive applications such as golf courses, irrigation controls and outdoor lighting. Premium splice designed to connect and moisture seal electrical connection for direct bury applications, rated up to 600 V. The 3M? direct bury splice kit DBO/B-6 (Bulk) combines the quick, reliable connection of a 3M? spring connector O/B with the moisture resistance of a high-impact, UV-resistant tube prefilled with moisture-resistant grease. It is UL listed for direct bury. Excellent for use with irrigation systems on golf courses and around business and homes. Also good for outdoor lighting systems.

Semi-cured rubber for low voltage electrical insulation, 30 mils. Self-vulcanizing and water resistant.

Insulates and protects against abrasion, weather, water, solvent splashes and chemicals. Stretchy, vinyl plastic. Applications include home, marine, auto, trailers and tools. Flame retardant. Pack of 5 colors.

Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.

Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.

Our terminals make connecting wires quick and easy. Whether it is securing to a bolt or stud, splicing or repairing wires or making quick connections, our terminals are there for all your applications needs in any type of environment.

Protects hoses, wire and cables from cuts, abrasions and UV wear. Corrugated for added flexibility. Split down the center for wire breakout where needed. Black.

Gardner? Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening.

Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products.

Malleable non-conductive compound for sealing of electrical raceway connections from air, noise and moisture.

For UF cables minimum #14/3, 12/2 maximum #8/3. Kit includes set screw splice connector and one 8 in x 1.3 in Dia heavy wall polyolefin heat shrink tubing.

Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL listed.

Convoluted plastic tubing to protect wiring. Split down the middle for ease of application. Clamshell packaging.

Heavy-duty zip ties are hard-wearing and designed for rugged industrial, automotive and farm/ag applications demanding high levels of tensile strength and large bundle diameters. Permanently secured until you cut them off GB ties lock tight without stretching or sliding. The thick nylon 6/6 material and patented one-piece, injection-molded construction eliminates failure due to parts working loose or breaking off. Raised ridges on the cable ties bent tips are designed to provide a secure grip while requiring minimal effort to close and the strong locking head ensures the increased tensile strength you need. Ideal for ducts, temporary fencing, heavy equipment and vibration prone areas in both electric and non-electric applications, including home repairs, remodeling, kitchen or bathroom renovations in residential and commercial locations. When you've got a big job that demands a strong tie able to handle a large bundle diameter then count on Gardner? Bender heavy-duty cable ties. UL recognized component. Ultraviolet black (UVB) ties resist harmful light rays - primarily for outdoor use.

Designed for strength, durability and reliability. Ideal for all bundling and organizing tasks from the workshop to the office and from the laundry room to the kitchen; you name it and these ties will bundle it. Designed with simple enhancements that make them easy to use including a slightly bent tip to ensure easy insertion into the tie head and close serrations along its length to promote precise adjustment when tightening.

Black friction tape with a matted finish that provides the best gripping surface available. Use over electrical splices, wrapping grips or sporting goods.

For NM cable and SE cable. Aluminum wedge and shell, with stainless steel bail. Indoor or outdoor applications. Use to connect a triplex overhead service entrance cable to a mounting device on a building. Bulk packed.

Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 V maximum in building wire and at 1000 V maximum in lighting fixtures and luminaries. Copper-to-copper connections only.

Heavy-duty zip ties are hard-wearing and designed for rugged industrial, automotive and farm applications demanding high levels of tensile strength and large bundle diameters. Permanently secured until you cut them off GB ties lock tight without stretching or sliding. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard while the patented one-piece, injection-molded construction eliminates failure due to parts working loose or breaking off. Raised ridges on the cable ties bent tips are designed to provide a secure grip while requiring minimal effort to close and the strong locking head ensures the increased tensile strength you need. Ideal for ducts, temporary fencing, heavy equipment and vibration prone areas in both electric and non-electric applications, including home repairs, remodeling, kitchen or bathroom renovations in residential and commercial locations. When you've got a big job that demands a strong tie able to handle a large bundle diameter then count on Gardner? Bender heavy-duty cable ties.

Professional kit contains solderless connectors including butt splices, spade terminals, disconnects and ring terminals, for wire size 10 to 22 AWG. Includes refillable sturdy plastic storage box.

Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.

Constructed with heat shrink insulation adhesive lined to waterproof and environmentally seal electrical connections when crimped and heated.

Gardner Bender 48 in natural nylon heavy-duty cable ties deliver great tensile strength for high-quality performance. Each tie has a double lock design with teeth on both sides.

These copper split bolt connectors have all copper alloy construction for high mechanical strength, maximum conductivity and low resistance.