The locknut wrench has been designed to end frustration. This ideal tool for locknut operation fits the majority of UL locknuts and features a thin profile that makes those normally tight spaces a thing of the past. It can be used to loosen or tighten a locknut by rotating the wrench in the direction of the arrows marked on both ends.

Heat shrink electrical tubing and terminals in splicing wire connections with the Gardner Bender pocket butane torch. This torch comes with a can of butane fuel for convenient refilling.

GB Electrician's Screw Kit, Thread Size: #8-32, Head Type: Round, Drive Type: Phillips, Package Quantity: 5 lb, Silver, Includes: (20) 2/3 in, (20) 7/8 in, (20) 1 in, (20) 1-1/4 in, (20) 1-5/8 in, (20) 2 in Phillips Head Screws

The IR thermometers allow for critical temperature measurements to be taken without having to touch an energized circuit. The D:S ratio or (Distance to Spot Ratio), is a rating used to state the distance, in feet, that the test unit should be from the target in order to measure a one foot diameter section. In other words, a 12:1 D:S Ratio means that from 12 ft away, the test unit is measuring a one foot diameter section of the target.

Engineered to specifications required by professional electricians the innovative 2-in-1 dualcheck tester from sperry instruments saves you time and money, while providing quality you can trust. This patent-pending dual-ended tester incorporates 2 of the most popular testers used by electricians, inspectors, technicians and homeowners into a single unit. Engineered with an exclusive design and latest technology gfci outlet tester on one end and a 50 to 1000 VAC non-contact voltage tester on the other the dualcheck quickly provides an accurate analysis of any 120 V receptacle. The non-contact voltage tester detects 50 to 1000 VAC and features a bright 360 deg led visual indicator along with an audible beeping indicator of the presence of voltage. On the other end our best-in-class gfci outlet tester features a clear and easy-to understand single led readout indicating correct wiring or open ground, open neutral, hot/gnd reverse, hot/neu reverse and open hot wiring errors without the need to memorize or interpret a chart. Designed for the jobsite this tester features hi-impact abs housing with a 250 lb crush rating and the ability to withstand drops of up to 10 ft. Conceived with long workdays in mind this unit also offers overmolded grips to ensure user comfort during repeated or prolonged use.

This multifunctional analog multimeter was designed for the homeowner, hobbyist or professional needing to make electrical and electronic equipment measurements. Capable of measuring 6 functions on 14 ranges on it is easy to read color-coded analog display you'll find yourself reaching for this handy unit almost every time. Unit tests AC and DC voltage of 10-50-250 and 500 V, DC current 250 mA, up to 50K of resistance, -20 to +56 dB decibels on AC voltage ranges and common household batteries from 1.5 V thru 9 V. Unit includes built-in 0 Ohm adjustment dial allowing you to reset prior to resistance testing and to perform internal battery test function. Unit incorporates fuse overload protection circuitry to protect the user and a mirror scale is provided to reduce the possibility of parallax errors. Ships with test leads and a tri-lingual instruction manual and includes a 1 year warranty. Common measurements with this unit include - testing household batteries for charge level, troubleshooting various low voltage circuits, testing wall receptacles for proper voltage and grounding and troubleshooting electrical cords, stings of lights, fuses and switches to determine if they are operating properly or if a break in the circuit exists and the item in question needs to be repaired or replaced. The decibel feature of this multimeter is used for transistor gain measurement in electronic circuits and should not be confused with audio decibels.

The stop shock II circuit analyzer makes it easy to test gfci receptacles and determine the appropriate wiring correction needed. This GFCI tester uses advanced circuitry and a patent-pending proprietary design to precisely detect the required low resistance (less than 10 Ohms) on ground wire and provides a clear and easy-to understand single led readout indication for correct wiring or bad ground, open neutral, hot/gnd reverse, hot/neu reverse and open hot wiring errors without the need to memorize or decipher a dual-indication chart. The stop receptacles require GFCI test function to test outlets wired in parallel to GFCI circuits (bathroom, kitchen and outdoor receptacles require GFCI protection). Designed for the jobsite this tester features hi-impact abs housing with a 250 lb crush rating and the ability to withstand drops of up to 10 ft.

Trace circuits to detect appropriate breaker. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time. The Breaker Finder is an integrated tool used to correctly identify the right breaker every time. The signal is generated by a plug style tool that also verifies the correct wiring of outlets and includes GFCI test functionality. The patented probe design indicates the signal strength through both and audio tone and visual strength indication. Magnets located on the tester allow for easy placement and operation. The nested design of the tone generator means that the units will not be separated during transport or storage.

Slits outer covering of all sizes, both old and new, non-metallic (type NM) sheathed cable.

GB's BigBen aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5X durability factor, increasing the foot pedal size and clearance by 40%, highlighting the markings and incorporating a dual sight-line system for bending on the floor or in the air. Includes industry standard markings to simplify the job. Made of rugged, heat-treated aluminum and backed by a lifetime warranty. Package includes bender head only. Also available with handle (Model #960H). Other head sizes available are 1 in (Model #962) and 3/4 in (Model #961). Bender handle available separately (Model #BH-75 - 3/4 in NPT x 38 in long). Includes a detailed hand bending manual which clearly illustrates various bends and how to achieve them including the mathematical formulas to complete more complicated bends.

Greenlee Textron D'Versibit Wire Pulling Kit, Type B Auger, Includes: 9/16 in, 09-03-54B Type B Auger Bit, 712P Placement Tool and 150 Pulling Grip for 1/2 in Outside Diameter Wire

Kwik Silver plated fish tape, same strength as conventional steel tape, corrosion-resistant, smooth plated to make it easier to fish with. High-impact nylon, one-piece handle with large handle grip. Self-tensioning, wide, impact-resistant rewinder case with viewports to ensure tape fit and retaining strap on inside to hold tape secure. 400 lb maximum design strength. 0.060 in thick 5 lb.

Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.

Quickly and conveniently check outlets, fuses, wires, plugs, motors, electronic circuits and more with Sperry's new pocket digital multimeter. The Sperry pocket digital multimeter offers 7 testing functions including AC/DC voltage up to 600 V, resistance, frequency, continuity, duty cycle and diode testing over 21 ranges with auto-ranging capability. Designed for someone seeking a convenient and simple yet accurate and efficient multimeter. This compact unit features overload protection on all ranges and both a low battery indicator and an auto-power off function to improve battery efficiency.

Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.

Self-adjusting, strips wire from 10 to 24 AWG. Adjustable stopper controls the length of the core strip. Swivel knob micro-adjusts for gauges smaller than 20 AWG. Wire crimper crimps 10 to 22 AWG insulated, 10 to22 AWG non-insulated and 7 to 9 mm ignition terminals.

Contains 100 anchors, 100 screws and a 1/4 in masonry drill bit. For use in concrete, block, tile and brick. Moisture and chemical resistant, for indoor or outdoor use.

This F-type compression crimp tool creates a permanent, water-tight sealed connection on RG-6, RG-6 Quad and RG-59 connectors.

The ProSource cable crimper with cushion grip handle can cut and strip wires, crimps ignition terminals. This clamper has easy-to-read wire size markings.

Two wire cutters. Crimps 7 to 8 mm insulated and non-insulated terminals, lugs and splices. Cuts and strips stranded wire, shears bolts. Pivot nut adjusts tension. Full-sized, plastic-covered cushioned handles. Cuts bolt of size 4 to 40, 6 to 32, 8 to 32, 10 to 24 and 10 to 32. Strips and cuts wire sizes 10 to 26 AWG stranded (4 to 0.14 mm) and 8 to 22 AWG solid (6 to 0.34 mm). Red handle of length 8-1/2 in and weight 0.47 lb.

With 12/2 and 14/2 stripping slots to quickly remove outer jacket of type NM-B non-metallic-sheathed cable. Stripping holes remove insulation on 12 AWG and 14 AWG lead wire. Narrow nose fits into tight places. Precision staggered shear-type blades for square, clean cuts on solid copper wire. Curved handles help reach into confined areas. Strong-gripping serrated nose, for easy bending, shaping and pulling of wire. Wire looping and bending holes. Screw-shearing holes. Coil spring provides fast self-opening action. Closure lock for storage. Double-dipped comfort grips. Yellow and white handle. Used for 12 AWG and 14 AWG solid wire.

Hardened wire cutter in nose. Tapered nose design for working in confined spaces. Accommodates wire from 10 to 22 AWG. Crimps 10 to 22 AWG. Crimping die marked for insulated and non-insulated solderless terminals and connectors. Plastic-dipped, cushioned handles. Red handle, 9-3/4 in L, 0.80 lb.

This wire stripper/cutter features six stripping holes and a shear-cutting knife to handle 8 to 18 AWG solid and 10 to 20 AWG stranded wire, plus shearing holes for 6 to 32 and 8 to 32 bolts. Longer hand grip coverage provides a more comfortable grip while the updated lock tucks nicely out of the way. The narrow head design allows this tool to easily get into tight places.

This high-leverage tool includes crimping die and side cutters. The ground hardened drop-forged high-carbon steel blades offer excellent performance and durability. The round nose smoothly slides into pocket and the serrated jaw ensures maximum gripping power. Formed crimp die for non-insulated terminals, we suggest GB# 310, 410, 311 and 411 crimp connectors for permanent connections. The secure grip handle reduces slipping and provides comfortable for all-day use.

Kit includes 921-18, 18 in quick connect extension, 921-36, 36 in quick connect extension, 150Q, 1/2 in cable pulling grip and 60A-3/4, 3/4 in auger bit.

Clamp-on meter for taking basic AC amperage measurements 20, 200, 400 A and has data hold and max hold 2000 count LCD display and a jaw that opens to 1.06 in. Category III 600 V safety rating per UL 61010B-1. Carrying case included.

The Gardner Bender GCM-500 clamp-on analog multimeter is a 4 function, 8 range manual-ranging tester engineered to measure AC Current (600 A), AC/DC Voltage (600/60 V) and resistance (1000 Ohm). Similar to standard analog multimeters, clamp meters offer a large range of functions with the additional unique ability to measure current without having to contact live conductors. This tester includes a 1-1/2 in jaw size with the lockjaw feature that prevents misuse by only allowing the jaws to open in the amps mode. Unit also offers an 8 position smooth rotary dial, 0 Ohm adjustment dial and a data hold switch to maintain the reading on the easy to read display. Unit meets Cetus agency approvals, is fuse and diode protected and includes a calibration screw. Tester provides a 3 ft drop and 150 lb crush rating as well as a 1 year warranty and includes both test leads and operating instructions in the package. Gardner bender offers over 50 years of experience making professional electrical testers, tools and supplies so you can count on us to provide quality performing products for professional and DIY use.

Strips UTP and STP cable up to 0.24 in (6.2 mm) OD. Tension release lever, compact design. For use on CAT 3 and CAT 5 cable. Carded.

This handy standard receptacle tester features a compact, comfortable, contoured design with neon indicators that display positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle (110 to 125 VAC circuits) and a succession of yellow and red lights provides indication of circuit status or specifies wiring errors. Lamps reveal 5 common wiring errors including open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse, as well as correct wiring. Easy to read status chart displayed on both top and bottom of the tester for multiple position viewing. Designed for use on standard outlets and extension cords.

The Gardner? Bender modular plug crimp tool is used to produce patch cable and handset cables, cut, strip and crimp.

Used to install wires above drop ceilings, through insulated walls and under carpet and floors. Contains three connectable fiberglass rods. Bullet nose and hook attachment included.

This compact and easy-to-use coaxial cutter and stripper adjusts easily to various cable thickness. Designed with a reversible v-block for different cables; RG-6 = 6, RG-58 = 8, RG-59 = 9 and RG-174 = D. This tool will both cut and strip the cable. Simply choose the correct cable size, adjust the blade depth and then insert the cable until it reaches the guide and rotate 1 - 4 times. Pull the tool straight out to remove the insulation. Designed with quick 1 squeeze cutting and measuring only 6-1/4 in long for compact storage. Comfortable in the hand and easily stored you'll be happy to have this tool on hand for all your coax installation needs.

Pen size, fits into pocket or tool pouch. Detects power and voltage without touching the bare conductor. For use on power wiring plus lighting, thermostats and other low voltage circuits. Use to detect voltage in outlets, fixtures, wires and cables. Finds breaks in wires. Identifies hot and neutral conductors. Low battery indication. Voltage detection 5 to1000 VAC. Frequency 50 to 500 Hz. Measurement category CAT IV, 1000 V. Includes two 1.5 V AAA batteries.

For pulling single wire, cable or fish tape through walls. Clip attaches to hole in bit, mesh basket holds wire or cable during recovery, swivel reduces twisting.

Bullet nose and in hook threaded tips, packaged in clear plastic tube. 12 ft (3 to 4 ft sections) kit. Highly visible 1/4 in Dia green fiberglass rods. 200 lb minimum pulling strength. Sections can be threaded together and are easy to see when working above ceilings, down walls or under raised floors. Comes in a tube.

ArmorEDGE wire stripper by Gardner Bender is designed to strip and cut solid and stranded wire. Envisioned to provide the user with the ultimate comfort and control these strippers offer 6-3/4 in symmetric ergonomic cushioned handles with dual gripping positions for traditional or forward hand positions coupled with a coiled spring action return to reduce job-fatigue. Easy to read laser-etched markings make it a snap to choose the right groove for the application while the stainless steel body and double bevel cutting blades offer superior corrosion and nick resistance. Wire looping holes strategically integrated into the blades allow the user to quickly loop wire ends to fit on screw terminals and the serrated plier nose makes quick work of grasping, gripping and pulling. Strips #10-#18 AWG and cuts and rethreads bolt sizes 6-32, 8-32 and 10-32. With a limited lifetime warranty and a wide array of outstanding features this is an essential wire stripper for every toolbox.

Used to test DC voltage in automotive applications. Features 3 ft test lead with alligator clamp and 360 deg bright visual indicator. Durable ABS housing with pocket clip. Checks fuses in junction block, automotive circuits for voltage. Back probe connectors and sockets. No batteries required.

Tapered nose allows cutting in tight locations. Dual-cutting edge and high-leverage comfort grip handle design for optimal cutting performance. Precision-machined and induction-hardened knives strengthen cutters and provide consistent performance when cutting aluminum, copper and medium-hard steel wire.

For pulling single wire, cable or fish tape through walls. Clip attaches to hole in bit, mesh basket holds wire or cable during recovery, swivel reduces twisting.

The Gardner? Bender GS-355 wire stripper/cutter will cut and strip stranded core wire from 20 to 10 ga or solid core wire from 10 to 18 ga This tool has precision ground cutting edges and a pliers nose for pulling and looping finished wire.

For aggressive chip removal in many types of woods. Screw point for easy starting and pulling through wood. Hole in bit for attaching pulling grip. With screw point removed, this bit can be ground to function like a standard combination bit.

The Gardner? Bender modular plug telephone crimp tool is used to produce patch cable and handset cables, cut, strip and crimp. The heat-treated frame provides strength and durability.

Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.

Greenlee Textron Placement Tool, Plastic/Steel, Silver

Wood-type auger bit with screw point. Pulls itself through wood, avoids walking or skidding. Excellent for drilling in soft woods or through thin sections. Slow back-taper allows for easy retrieval. Hole in bit for attaching pulling grip.

Heavy-duty 3-way voltage tester tests AC/DC voltage at 120, 240 and 277 V. Individual indicators for each voltage range assures reliability. 24 in test lead is long enough for convenient testing. Unit is both durable and compact. Testing applications include outlets, panels, light fixtures, switches, circuit breakers and more.

GB's Series of UpperHand fish tapes has improved traditional hand fishing with the first ergonomic fish tape in the industry. Easy to grip, easy to retract and backed by an industry leading 5 years limited warranty. The improved housing design is manufactured with impact-resistant ABS and nylon resins that exceed the 25 ft drop test while the corrosion-resistant plated steel wire ensures the toughest, most durable tape for long-lasting use.

Sperry makes the job of locating electrical circuits (AC circuits of 110 to 125 V) quick and easy. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time using trial and error until you hit the right one. This circuit breaker finder features a sending unit which you plug into a receptacle in the room where you want to work and a receiving unit which you use to test the breakers to correctly identify the right breaker every time. The receiver features both a visual flashing light and an audible beeping to alert you when the correct breaker is identified. The package includes a user manual and a 9 V battery required for the receiver unit.

Measures AC amperage, AC/DC voltage and resistance. True RMS for accurate measurements when the voltage or current waveform is distorted by non-linear loads. Amperage measurement 400, 600 A. Voltage measurement 400, 600 V. 3-1/2-digit LCD display. Jaw opens 1.38 in. Auto-power off for longer battery life. Measurement category Cat III, 600 V per UL 3111-1.

Electricians demand precision and reliability. That's why they choose CHANNELLOCK? wire strippers. Accurate and easy cuts from a legendary tool maker- CHANNELLOCK?.

Cuts metal conduit in seconds with a few turns of the crank and a twist of the conduit. Ample clearance between handle and body. Set conduit size for multiple cuts of the same size. No need to reset. Set blade adjustment with only a screwdriver. In-handle blade storage holds up to five spare blades. Weighs 4 lb. Capacity of 14/2 to 10/4 AWG, 3/8 in flexible metal conduit.

This low voltage tester tests for AC/DC Voltage from 5 to 50 VAC/VDC, 50 to 60 Hz. The indicator glows when voltage is present and brightens as voltage increases. Applications include testing low volt outdoor lighting, low volt control panels, doorbells, alarm systems and automotive 12 VDC and 36 VDC.

The Gardner Bender network cable tester for coax, Cat3 through Cat6 Ethernet tests for opens, shorts, miswires, reversals and shield continuity. The easy-to-read LEDs of this cable tester pinpoint the exact error of the cable being tested.

For pulling single wire, cable or fish tape through walls. Clip attaches to hole in bit, mesh basket holds wire or cable during recovery, swivel reduces twisting.

Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.

Medium-duty side-cutting pliers used to cut solid or stranded copper and aluminum wire.

When you're ready to add a multimeter to your toolbox this unit is a great place to start. This tester is designed to work on most household appliances and is equipped with an easy to read 3-1/2 in digital display and three testing functions - AC voltage to 500 V, DC voltage to 600 V and resistance to 2 mOhm. The 11 position manual ranging smooth rotary style achieves precise readings and the low battery indicator ensures an accurate read-out. Durable housing is drop-resistant to 3 ft and crush-rated to 150 lb. Tester is rated Cat III 600 V. Unit comes pre-packaged with secure-fitting 26 in test leads and operating instructions.

Strips solid or stranded wire. Compact, adjusts to eight wire sizes. Hardened spring steel. Looping hole bends, loops wire for termination on screws. Also includes spring return for easy handling.

Keyhole saw with integrated blade and ergonomic handle design provides maximum strength. Hardened steel blade with clog-free teeth, handle with non-slip grip. Pointed tip easily punches through drywall. Blade cuts on both on push and pull strokes. Hole in handle for lanyard or convenient storage. Tool is not insulated. Overall length of 11-5/8 in.

Ergonomic high leverage grips for maximum torque, molded and insulated shaft rated to 1000 V for protection when working with electricity. Hardened chrome vanadium steel, with magnetic tips. Two-piece set includes SCE-3252 #2 Phillips tip and SCE-3256 3/16 in slotted tip. Carded packing.

For high-leverage. Cuts up to 3/8 in Dia cable. Crimps RG-58, RG-59 and RG-6 F-style connecters. Cushioned grips.

Three core products - the DM-25 manual ranging multimeter to measure voltage and check batteries, the GT-10 polarity cube to trouble shoot 120 VAC grounded outlets and the GT-11 non-contact voltage detector for use in outlets, lighting fixtures, circuit breakers, wires and cables. Comes with a durable carrying case for storage and added protection.

Replacement blade for Greenlee 0952-01 or 1940 flexible metal conduit cutter.

Steel fish tape in self-tensioning impact-resistant rewinder case with dirt-free tape finish. 0.045 in thick, weighs 2.75 lb.

The ProSource wire stripper can strip 10 to 24 AWG copper or aluminum wire, solid or stranded, cuts wire (HRC 40-50), crimps 10 to 22 AWG insulated, 4 to 22 AWG non-insulated and 7 to 8 mm ignition terminals. The micro adjustable knob allows wire smaller than 24 AWG to be stripped. The wire stripper has easy-to-read wire size markings.

Electricians demand precision and reliability. That's why they choose CHANNELLOCK? wire strippers. Accurate and easy cuts from a legendary tool maker- CHANNELLOCK?.

Hand tools are a part of every tool box and with exclusive features for safety, durability, reliability and life strength, Gardner Bender hand tools set an industry standard and provide you with the great performance you've come to expect for every job. Whether you need wire cutters, terminal crimpers, cable strippers or pliers Gardner Bender has the ideal tool to complete your electrical tool set. Our tools are ideal and essential for any wiring project whether it be an automotive application, marine application or for construction.

Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim, cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL listed.

For home, auto and marine applications.

For home, auto and marine applications.

This patented line of tools with snap-in sensor detects AC voltage without contacting live wires.

Wood-type auger bit with screw point. Pulls itself through wood, avoids walking or skidding. Excellent for drilling in soft woods or through thin sections. Slow back-taper allows for easy retrieval. Hole in bit for attaching pulling grip.

The ProSource wire stripper is made of rust-resistant steel with a cushioned vinyl grip. The stripper has easy-to-read wire size markings.

Circuit Alert pliers combine common electrician needs with the Gardner Bender over-molded, comfort grip.

Designed specifically for DIY occasional use, this 50 ft tape is made of standard steel material and makes quick work of most wiring projects, pulling wire through conduit or framing.

Kit includes sleek multi-use stripper-crimper, 100 assorted insulated terminals in a convenient 11 compartment reclosable storage and carrying case.

Gardner Bender electrician scissors are made from durable stainless steel with precision hollow ground and hardened for long lasting edge. It is made for right and left handed users. It is for shearing soft cable up to 22 mm Dia, insulation materials, electrical tape, stripping insulation and many other materials.

Plier nose for pulling and looping wire. Scissor-type cutting blade. Ergonomic-shaped handles. Cuts and strips both solid and stranded wire. Spring automatically spreads handles. Slide lock. Wire sizes embossed in metal. Dimensions 6 in/152 mm, minimum/maximum strip AWG 20 to 10, 0.8 to 2.6 mm.

"Strips insulation from coax cable. 3.87"" height x 1.25"" width x .75"" depth."

These Gardner Bender 30 A battery clamps (2-PK) are coated in highly conductive copper for excellent performance. Each has a color-coded covering on the handle.

Mr. LongArm bulb changers are the smart way to change light bulbs. The spotlight bulb changer attaches to an extension pole and allows the user to remove and replace bulbs quickly and easily, while standing safely on the ground.

Electricians demand precision and reliability. That's why they choose CHANNELLOCK? wire strippers. Accurate and easy cuts from a legendary tool maker - CHANNELLOCK?.

Cushion-grip handles. Pliers nose has serrated jaw to pull, loop and twist wire. Crimper works on 7 mm and 8 mm non-insulated terminals and electrical 22-20 to 20-10 insulated terminals. Wire cutters and strippers at front of tool strip wire sizes 22-20 to 22-10. Bolt cutter cuts bolt sizes 4-40, 5-40, 6-32, 8-32, 10-32 and 10-24.

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Pocket sized analog tester. Tests voltage, DC voltage, DC current, resistance, continuity and batteries.

The Strip-Easy automatic wire stripper is an ideal choice for stripping solid or stranded wire. The spring-loaded stripper automatically removes wire insulation on 22-8 ga wires without crushing the ends. It has a comfortable, no-slip plastic handle that helps to secure a firm hand grip during use.

This tool cuts copper and aluminum solid or stranded wire. Rotate the cam wheel adjustment to strip appropriate 10 to 24 AWG wire. Holes in the side of the jaws are intended for looping solid wire. Compact tool adjusts quickly to any of eight wire sizes.

For home and auto applications.

For home, auto and marine applications.

Cuts and strips wire. Narrow, serrated pliers nose to pull, loop and bend wire. Long, curved cutting blade. Cutters and strippers are in front of the pivot for maximum ease of use in reaching into tight places. Crimps insulated and non-insulated terminals and 7 to 8 mm ignition terminals, cleanly shears bolts. Use on bolt sizes 4-40, 5-40, 6-32, 8-32, 10-32, 10-24, strips and cuts 10 to 22 AWG, connectors 10 to 22 ga Cushioned handles for comfort.

Wire gauge markings on both sides, cuts, strips and loops wire. Wide handles with cushion ridges designed for comfort. Spring-loaded action returns handles to open position. Narrow nose fits into tight places. Made of hardened steel with precision-ground stripping holes. Black oxide finish. No. 11045 strips solid wire AWG. No. 11046 strips stranded wire.

Wire gauge markings on both sides, cuts, strips and loops wire. Wide handles with cushion ridges designed for comfort. Spring-loaded action returns handles to open position. Narrow nose fits into tight places. Made of hardened steel with precision-ground stripping holes. Black oxide finish. No. 11045 strips solid wire AWG. No. 11046 strips stranded wire.

GB's BigBen aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5X durability factor, increasing the foot pedal size and clearance by 40%, highlighting the markings and incorporating a dual sight-line system for bending on the floor or in the air. Includes industry standard markings to simplify the job. Made of rugged, heat-treated aluminum and backed by a lifetime warranty. Package includes bender head only. Also available with handle (Model #961H). Other head sizes available are 1/2 in (Model #960) and 1 in (Model #962). Bender handle available separately (Model #BH-75 - 3/4 in NPT x 38 in long). Includes a detailed hand bending manual which clearly illustrates various bends and how to achieve them including the mathematical formulas to complete more complicated bends.

Fits a 3/8 in drill chuck and can be used with a cordless drill. Cuts perfect holes in drywall and ceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting installations. Self-sharpening, carbide-sprayed cutting tips cut dozens of holes in very abrasive materials and still stay sharp. Stabilizer spring balances cutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilot drill eliminates changeover time. Included dust shield virtually eliminates flying dust and debris.

The continuity tester is very easy-to-use and is used to test for breaks in non-energized wires or cords. Continuity has a bright 360 deg visual indicator located near the tip along with a flexible lead for ease of use.

GB's Series of UpperHand fish tapes has improved traditional hand fishing with the first ergonomic fish tape in the industry. Easy to grip, easy to retract and backed by an industry leading 5 years limited warranty. The improved housing design is manufactured with impact-resistant ABS and nylon resins that exceed the 25 ft drop test while the corrosion-resistant plated steel wire ensures the toughest, most durable tape for long-lasting use.

Greenlee Textron Knockout Kit, Specifications: 1/2 to 2 in, Includes: (1) 1/2, 3/4, 1-1/4, 1-1/2 and 2 in Punches, (1) Driver and (1) Draw Studs

Testing for voltage to any electrical project is important for your safety. This compact multi-purpose unit makes it easy with a combination voltage probe and continuity tester built into a single unit with a convenient screwdriver tip designed for quick faceplate removal. Its compact size fits easily into a pocket or tool box for retrieval as needed. Use to test outlets, fuses, switches, electronics, extension cords, light fixtures and low voltage lighting circuits.

Replacement leads for Gardner Bender meters GMT-12A, GMT-18A. UL recognized. Tough ABS plastic. Flexible cords for easy use.

Poly line, 210 lb. average breaking strength, can be blown into conduit and then used to pull in a larger pulling rope or it can be used directly to pull in smaller wires. Can be used directly from the container with power fishing systems. Resists tangling when dispensing. Prepunched hole for dispensing the line. Rot and mildew-resistant.

Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.