Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

This quick-connect elbow fitting works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy-to-install no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature insures zero-leak connections. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making it ideal for vibrating and dynamic applications.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

This 1/4 in x 1/8 in MIP quick-connect elbow works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy-to-install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature insures zero-leak connections. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

The SharkBite? straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push to connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.

The SharkBite? stop valve connectors allow you to easily connect 1/4 in (3/8 in OD) copper tube sized pipe (CTS) to either a 1/4 or 3/8 in compression connection, which are primarily used for refrigerators or ice makers. The push-to-connect connection is the fastest and easiest way to connect to copper, PEX, CPVC or PE-RT pipe and requires no soldering, clamps, unions or glue.

Lead-free reducing tee connects to copper, CPVC and PEX tubing with easy push connect technology. Backed by a 75 years warranty. Our lead-free reducing tees are ideal for manufacturing, municipal, residential and commercial applications.

Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.

Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.

The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.

This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

This quick-connect female swivel elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 3/4 in GHT fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

ProBite's lead-free straight couplings are the answer for a fast, leak-free pipe installation. Installable in seconds without requiring glues, solder or flux, our lead-free straight couplings provide solid connections on PEX, CPVC or copper pipe.

The SharkBite? push-to-connect toilet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 7/8 in ballcock thread on the other end. The fittings are available in either straight connections or as an elbow 90 deg connection. They are also easily rotatable after installation for easy installation even in tight spaces.

This quick-connect female swivel elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 1/2 in NPSM fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.

Watts Tube Union Coupling, Nominal Size: 3/4 in, 250 psi, Operating Temperature: 75 deg F, Plastic

Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.

SharkBite? female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required.

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.

This quick-connect male elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 1/2 in NPT fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.

ProBite's lead-free push connect? stop end connectors are easy to install and easy to remove. Using Push Connect? technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems or any application where the flow of water might need to be interrupted. ProBite's lead-free push connect? stop ends are great for direct or indirect cold water systems, unvented and vented hot water systems and more.

B & K ProLine Pipe Tee, Nominal Size: 3/4 in, Push-Fit Connection, Brass, Suitable for: Copper, CPVC and PEX Tubing

Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.

B & K ProLine Adapter, Nominal Size: 3/4 in, Push-Fit x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing

B & K ProLine Adapter, Nominal Size: 3/4 in, Push-Fit x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing

B & K ProLine Pipe Coupling, Nominal Size: 3/4 in, Brass, Suitable for: Copper, CPVC and PEX Tubing

ProBite's lead-free reducing coupling connects copper, CPVC and PEX tubing in any combination, for long-lasting full flow connections. Easy to install, easy to remove, reusable, long-lasting and backed by a 75 years warranty.

ProBite's lead-free push connect? stop end connectors are easy to install and easy to remove. Using Push Connect? technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems or any application where the flow of water might need to be interrupted. ProBite's lead-free push connect? stop ends are great for direct or indirect cold water systems, unvented and vented hot water systems and more.

B & K ProLine Pipe Tee, Nominal Size: 1/2 in, Push-Fit Connection, 200 psi, Brass, Suitable for: Copper, CPVC and PEX Tubing

Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.

Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.

B & K ProLine Adapter, Nominal Size: 1/2 in, Push-Fit x Male Connection, 200 psi, Brass

B & K ProLine Adapter, Nominal Size: 1/2 in, Push-Fit x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing

ProBite provides lead-free long-lasting slip couplings that are easy to install, remove and reuse. Connect to copper, PEX and CPVC in any combination. The ideal solutions for pipe fitting repairs. Only one end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe.

ProBite's lead-free straight couplings are the answer for a fast, leak-free pipe installation. Installable in seconds without requiring glues, solder or flux, our lead-free straight couplings provide solid connections on PEX, CPVC or copper pipe.

SharkBite? male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.

Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.

When transitioning pipe size, there is no easier way than with SharkBite? push-fit reducing couplings. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need for solder, glue, clamps or unions, simply push to connect and move on. This quick connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is also rated to 200 deg F and 200 psi.

SharkBite? elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 deg connection. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.

This quick-connect stackable elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 3/4 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.

Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.

This quick-connect female swivel elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 7/8 in BC fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

The SharkBite? straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push to connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.

The SharkBite safe seal tool is a pipe deburring and depth setting tool designed for use with chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX) and copper tubing.

The SharkBite? push-to-connect faucet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 1/2 in threaded connection on the other end. They are also easily rotatable after installation for easy installation even in tight spaces.

SharkBite? female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required.

Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.

The ProBite disconnect tool is used for quick and easy fitting removal in all plumbing applications. The ProBite? disconnect tool is available in all standard fitting sizes to ensure a quick and proper fitting removal every time.

The ProBite disconnect tool is used for quick and easy fitting removal in all plumbing applications. The ProBite disconnect tool is available in all standard fitting sizes to ensure a quick and proper fitting removal every time.

SharkBite? tees are push-to-connect and are capable of connecting copper, PEX, CPVC or PE-RT tubing in any combination. They are rotatable after assembly which makes for easy installation even in cramped working conditions.

Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.

The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.

Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.

SharkBite? male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.

Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.

Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.

This 1/2 in FIP plastic quick-connect drop ear elbow incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.

Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.

SharkBite? reducing tees come in a variety of different sizes and allow for pipe size reduction in multiple ways. These fittings are easily rotated after installation to make connecting even easier in tight spaces. There is no need for soldering, clamps, unions or glue.

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.

SharkBite? reducing tees come in a variety of different sizes and allow for pipe size reduction in multiple ways. These fittings are easily rotated after installation to make connecting even easier in tight spaces. There is no need for soldering, clamps, unions or glue.

SharkBite? tees are push-to-connect and are capable of connecting copper, PEX, CPVC or PE-RT tubing in any combination. They are rotatable after assembly which makes for easy installation even in cramped working conditions.

This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 3/8 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.

Slip fittings simplify repair by doing the job that two couplings and extra pipe used to do. Only one end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe. The fitting can be released with a disconnect tool and slid back onto the other end of the pipe for successful leak repair. Suitable for copper or CPVC only.

SharkBite? end caps are push to connect and are the easiest way to cap off your copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a disconnect clip. All SharkBite? fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 psi and 200 deg F.

SharkBite? elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 deg connection. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.

Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.

SharkBite? male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.

Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.

The SharkBite? push-to-connect toilet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 7/8 in ballcock thread on the other end. The fittings are available in either straight connections or as an elbow 90 deg connection. They are also easily rotatable after installation for easy installation even in tight spaces.

This quick-connect stackable elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint.

When transitioning pipe size, there is no easier way than with SharkBite? push-fit reducing couplings. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need for solder, glue, clamps or unions, simply push to connect and move on. This quick connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is also rated to 200 deg F and 200 psi.

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.

Dishwasher elbows are a 90 deg fitting that connects the hot water line to the dishwasher. SharkBite? dishwasher elbows enable quick and easy connection and do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection and their specially formulated O-ring compresses to create an ideal watertight seal.