Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2 in CTS x 1/4 OD.

Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.

Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.

Hy-Ear elbows are used to transition from copper, PEX, CPVC or PE-RT to threaded pipe. They are similar to female elbows, but have mounting ears with holes for securing to a surface (typically an overhead surface such as a ceiling) and they provide additional stability. SharkBite? Hy-Ear elbows do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection and their specially formulated O-ring compresses to create an ideal watertight seal.

Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.

Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.

This quick-connect female swivel elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 3/4 in NPSM fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.