Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Flair-It PEXLOCK Pipe Elbow, Nominal Size: 1/2 in, FPT Connection, Angle: 90 deg, Suitable for: PEX or Polybutylene Tubing

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.

Used for capping off PEX fittings. Bar coded.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Used for capping off PEX fittings. Bar coded.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. Bar coded.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Used for inserting a plug into the end of a pipe. Bar coded.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. Bar coded.

Used for inserting a plug into the end of a pipe. Bar coded.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Used for capping off PEX fittings. Bar coded.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Flair-It Tube Tee, Nominal Size: 1/2 x 1/8 in, Suitable for: PEX or Polybutylene Tubing

Used for inserting a plug into the end of a pipe. Bar coded.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.