Designed to be used with a 3/4" diameter supply connector to seal the connection. 13/16 x 1 in.

Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 18 in Length, Stainless Steel

Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 12 in Length, Stainless Steel

B & K Pipe Union, Series: 168, Dielectric, 3/4 in Nominal, FPT x C End, 1.88 in Length, 250 psi Working, Brass, Galvanized, 180 deg F, Standards: ANSI B16.18, ANSI B1.20.1, For Use With Water Up to 210 deg F

WaterFlex Water Heater Connector, Corrugated, Flexible, 3/4 in Nominal, FIP Connection, 18 in Length, 125 psi, -40 TO 180 deg F, Stainless Steel, Brass, Nitrile Rubber, IAPMO Certified, UPC Compliant

Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 18 in Length, Stainless Steel

B & K Pipe Union, Series: 168, Dielectric, 1 in Nominal, FPT x C End, 2-1/4 in Length, 250 psi Working, Brass, Galvanized, 180 deg F, Standards: ANSI B16.18, ANSI B1.20.1, For Use With Water Up to 210 deg F

B & K Pipe Union, Series: 167, Dielectric, 3/4 in Nominal, MPT x C End, 1-3/4 in Length, 250 psi Working, Brass, Galvanized, 180 deg F, Standards: ANSI B16.18, ANSI B1.20.1, For Use With Water Up to 210 deg F

Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 12 in Length, Stainless Steel

SharkBite Water Heater Installation Kit, Push-Fit, 1/2 x 3/4 in FNPT, Brass, Includes: (2) Sharkbite Connector Fittings and (1) Disconnect Clip, Standards: ANSI/NSF-61 Specified, For Potable/Hydronic Heating Water Distribution

B & K Pipe Union, Series: 168, Dielectric, 1/2 in Nominal, FPT x C End, 250 psi Working, Brass, Galvanized, 180 deg F, Standards: ANSI B16.18, ANSI B1.20.1, For Use With Water Up to 210 deg F

CopperFlex Water Heater Connector, 3/4 in Nominal, FIP Connection, 18 in Length, 125 psi, 40 - 180 deg F, Copper, Polypropylene, Brass and Rubber, ASME A112.18.6, CSA B125, IAPMO Certified, 7/8 in OD

Fluidmaster Water Heater Connector, 3/4 in Nominal, MIP X FIP Connection, 18 in Length, Stainless Steel, Nickel, A112.18.6, CSA Certified, FDA Approved, IAPMO Certified, PS74-95, SBCCI, NSF 61, UPC Compliant

Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 24 in Length, Stainless Steel

WaterFlex Water Heater Connector, Corrugated, Flexible, 3/4 in Nominal, FIP Connection, 24 in Length, 125 psi, -40 TO 180 deg F, Stainless Steel, Brass, Nitrile Rubber, IAPMO Certified, UPC Compliant

Fluidmaster Water Heater Connector, 3/4 in Nominal, MIP X Compression Connection, 18 in Length, 1000 psi, Stainless Steel, Nickel, A112.18.6, CSA Certified, FDA Approved, IAPMO Certified, PS74-95, SBCCI, NSF 61, UPC Compliant

CopperFlex Water Heater Connector, Corrugated, 3/4 in Nominal, FIP X Male/Female Sweat Connection, 24 in Length, 125 psi, 40 - 180 deg F, Copper, Polypropylene, Brass and Nitrile Rubber, ASME A112.18.6, CSA B125, C36000, IAPMO Certified, 7/8 in ID

Camco Temperature and Pressure Valve, 150 psi at 210 Deg F, 3/4 in Inlet/Outlet Valve With 2-1/2 in Shank, Stainless Steel Spring, Brass Body, Epoxy Coated Extension Probe, Standards: ANS Z21.22 Design, AGA Certified

Fluidmaster Water Heater Connector, 3/4 in Nominal, FIP X Compression Connection, 18 in Length, Stainless Steel, Nickel, A112.18.6, CSA Certified, FDA Approved, IAPMO Certified, PS74-95, SBCCI, NSF 61, UPC Compliant

CopperFlex Water Heater Connector, 3/4 in Nominal, FIP Connection, 24 in Length, 125 psi, 40 - 180 deg F, Copper, Polypropylene, Brass and Rubber, ASME A112.18.6, CSA B125, IAPMO Certified, 7/8 in OD

Fluidmaster Water Heater Connector, 3/4 in Nominal, FIP Connection, 18 in Length, 1000 psi, Stainless Steel, Nickel, NSF Approved, 0.94 in Tube Diameter

CopperFlex Water Heater Connector, 3/4 in Nominal, FIP Connection, 15 in Length, 125 psi, 40 - 180 deg F, Copper, Polypropylene, Brass and Rubber, ASME A112.18.6, CSA B125, IAPMO Certified, 7/8 in OD

WaterFlex Water Heater Connector, Corrugated, Flexible, 3/4 in Nominal, FIP Connection, 12 in Length, 125 psi, -40 TO 180 deg F, Stainless Steel, Brass, Nitrile Rubber, IAPMO Certified, UPC Compliant, 1-1/8 in Wrench

Danco Water Heater Washer, Rubber

CopperFlex Water Heater Connector, 3/4 in Nominal, FIP Connection, 12 in Length, 125 psi, 40 - 180 deg F, Copper, Polypropylene, Brass and Rubber, ASME A112.18.6, CSA B125, IAPMO Certified, 7/8 in OD

Fluidmaster Water Heater Connector, 3/4 in Nominal, FIP Connection, 12 in Length, Stainless Steel, Nickel, A112.18.6, CSA Certified, FDA Approved, IAPMO Certified, PS74-95, SBCCI, NSF 61, UPC Compliant

SharkBite Water Heater Installation Kit, Push-Fit, 3/4 x 3/4 in FNPT, Brass, Includes: (2) Sharkbite Connector Fittings and (1) Disconnect Clip, Standards: ANSI/NSF-61 Specified, For Potable/Hydronic Heating Water Distribution

WaterFlex Water Heater Connector, Corrugated, Flexible, 3/4 in Nominal, FIP Connection, 18 in Length, Stainless Steel, Blue/Red, IAPMO Certified, UPC Compliant

Watts Temperature and Pressure Relief Valve, Automatic, Series: 100XL, 3/4 in, MNPT X FNPT End Connection, 150 lb, Brass Body, Stainless Steel Spring, 4 in Thermostat, 210 deg F, ANSI Z21.22, ASME Specified, CSA Certified, For Water Heater and Hot Water Storage Tank Application

Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).

Watts Temperature and Pressure Relief Valve, Automatic, Series: 100XL, 3/4 in, MNPT X FNPT End Connection, 150 lb, Brass Body, Stainless Steel Spring, 4 in Thermostat, 210 deg F, ANSI Z21.22, ASME Specified, CSA Certified, For Water Heater and Hot Water Storage Tank Application

Camco Water Heater Element, High Watt Density, Series: 4603, 240 V, 4500 W Power, Universal Flanged Connection, Copper Tubing with Magnesium Oxide, Nickel Plated, Includes: Gasket, UL Listed, 15 in Diameter Tank

Camco Water Heater Thermostat, Replacement, Single Element, UL Listed

Therm-O-Disc Water Heater Thermostat, Dual Element Lower, Series: 8123, 240 V, 3.63 in Overall Width, 1-1/4 in Overall Depth, UL Listed

Camco Water Heater Upper Thermostat, Adjustable, 8-1/2 in Overall Length, 3.63 in Overall Width, 1-1/4 in Overall Depth

Camco Water Heater Element, Low Watt Density, Series: 2583, 240 V, 4500 W Power, Screw-In Foldback Connection, Copper Tubing with Magnesium Oxide, Nickel Plated, Includes: Gasket, CSA Certified, UL Listed, 13 in Diameter Tank

Fluidmaster Water Heater Connector, 3/4 in Nominal, FIP Connection, 24 in Length, 1000 psi, Stainless Steel, Nickel, A112.18.6, CSA Certified, FDA Approved, IAPMO Certified, PS74-95, SBCCI, NSF 61, UPC Compliant

Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).

Camco Water Heater Element, Ultra Low Watt Density, Series: 2953, 240 V, 4500 W Power, Screw-In Ripple Foldback Connection, High Grade Nickel Chromium Alloy, Includes: Gasket, CSA Certified, UL Listed, 15 in Diameter Tank

Camco Water Heater Element, Low Watt Density, Series: 2723, 240 V, 4500 W Power, 1-3/8 in Connection, Screw-In Foldback Connection, Includes: Gasket, CSA Certified, UL Listed, 13 in Diameter Tank

Camco Dielectric Heat Trap, Flapper Style, 3/4 in MPT X 3/4 in MPT X 3 in Length MIP, Iron, UL Listed

1-1/4" shank length. Heavy brass construction. Neoprene seal disc. 3/4" hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.

Camco Water Heater Element, Ultra Low Watt Density, Series: 2923, 240 V, 4500 W Power, Screw-In Foldback Connection, High Grade Nickel Chromium Alloy, Includes: Gasket, CSA Certified, UL Listed, 15 in Diameter Tank

Camco Water Heater Element, High Watt Density, Series: 2143, 120 V, 1500 W Power, Screw-In Connection, Copper Tubing with Magnesium Oxide, Nickel Plated, Includes: Gasket, UL Listed, 9 in Diameter Tank

Camco Water Heater Element, High Watt Density, Series: 2163, 240 V, 1500 W Power, Screw-In Connection, Copper Tubing with Magnesium Oxide, Nickel Plated, Includes: Gasket, UL Listed, 9 in Diameter Tank

Camco Water Heater Element, High Watt Density, Series: 2243, 240 V, 2500 W Power, Screw-In Connection, Copper Tubing with Magnesium Oxide, Nickel Plated, Includes: Gasket, UL Listed, 10 in Diameter Tank

Camco Water Heater Element, High Watt Density, Series: 4363, 120 V, 1500 W Power, Universal Flanged Connection, Copper Tubing with Magnesium Oxide, Nickel Plated, Includes: Gasket, UL Listed, 9 in Diameter Tank

Camco Water Heater Element, Low Watt Density, Series: 4703, 240 V, 4500 W Power, Universal Flanged Foldback Connection, Copper Tubing with Magnesium Oxide, Nickel Plated, Includes: Gasket, CSA Certified, UL Listed, 13 in Diameter Tank

Camco Water Heater Element, High Watt Density, Series: 2363, 240 V, 5500 W Power, Screw-In Foldback Connection, Copper Tubing with Magnesium Oxide, Nickel Plated, Includes: Gasket, UL Listed, 11 in Diameter Tank

Camco Dielectric Nipple, 3/4 in Nominal, MPT End, 2-1/2 in Length, For Water Heater Inlet and Outlet Hook Ups and Other Uses Where Dissimilar Metals Occur in Piping and Plumbing Systems

Camco Water Heater Element, High Watt Density, Series: 2283, 240 V, 3500 W Power, Screw-In Connection, Copper Tubing with Magnesium Oxide, Nickel Plated, Includes: Gasket, UL Listed, 14 in Diameter Tank

Camco Water Heater Element, High Watt Density, Series: 2263, 240 V, 3000 W Power, Screw-In Connection, Copper Tubing with Magnesium Oxide, Nickel Plated, Includes: Gasket, UL Listed, 12 in Diameter Tank

Camco Water Heater Element, High Watt Density, Series: 2203, 120 V, 2000 W Power, Screw-In Connection, Copper Tubing with Magnesium Oxide, Nickel Plated, Includes: Gasket, UL Listed, 9 in Diameter Tank

Watts Temperature and Pressure Relief Valve, Automatic, Series: 100XL, 3/4 in, MNPT X FNPT End Connection, 125 lb, Brass Body, Stainless Steel Spring, 4 in Thermostat, 210 deg F, ANSI Z21.22, ASME Specified, CSA Certified, For Water Heater and Hot Water Storage Tank Application

Campco Water Heater Drain Valve, 3/4 in, MPT x Male Hose Thread End Connection, Plastic Body, For Water Heaters

Campco Temperature and Pressure Relief Valve, 3/4 in, NPT End Connection, 150 psi, Brass Body, Stainless Steel Spring, 210 deg F, 1-1/2 in Length x 3.63 in Width x 11.38 in Height, Brass/Antique Brass, Standards: ANSI Z21.22, AGA Certified, For Use With Water Heaters

Camco Water Heater Connector Kit, Suitable For Use With: Electric Water Heater, Copper, 15 in Length, Includes: (2) 3/4 in X 2 in Dielectric Nipples, (2) 3/4 in X 15 in Flexible Water Connector and (1) Roll Teflon Tape

Camco Water Heater Connector Kit, Suitable For Use With: Gas Water Heater, Copper, 15 in Length, Includes: (2) 3/4 in NPT X 2 in Dielectric Nipples (2) 3/4 X 15 in Flexible Water Connector (1) Roll Teflon Tape (2 )3/4 in NPT Compression Adapters and (1) 1/2 X 24 in Stainless Steel Gas Connector

Camco Water Heater Element, High Watt Density, Series: 2293, 240 V, 3800 W Power, Screw-In Connection, Copper Tubing with Magnesium Oxide, Nickel Plated, Includes: Gasket, UL Listed, 15 in Diameter Tank

Camco Water Heater Thermostat, Single Element, Series: 7843, 110 - 160 deg F, 120 V, 1 Poles, UL Listed

Plumer's Pack Thermostat Contractor Pack, Includes: (2) High Watt Density Elements NO 02342 4500 W 240 V, (1) Apcom Style Lower Thermostat With Protector NO 07722, (1) Apcom Style Upper Thermostat With Protector NO 07862, For Professional Plumer

Camco Universal Adapter Kit, Includes: (1) 2-1/2 in 4-Bolt Adapt-A-Flange, (1) Four Hole Gasket, (1) Screw-In Gasket, (1) Thermostat Bracket, (4) 5/16 [NO 18] - 5/8 in Hex Bolt-Washers

Camco Water Heater Thermostat, Dual Element Lower, Series: 7723, 110 - 160 deg F, 240 V, 1 Poles, Includes: Shock Shield, UL Listed

Camco Water Inlet Dip Tube, Flared, 52 in Vertical, PEX

Camco Water Heater Thermostat, Dual Element Upper, Series: 7863, 110 - 160 deg F, 240 V, 2 Poles, 1-1/2 in Overall Length, 3.63 in Overall Width, Includes: Shock Shield, UL Listed

Camco Dielectric Union, Suitable For Use With: 350 psi Water Heater, 3/4 in FIP x 3/4 in Sweat, For Water Storage Tanks, Gas Piping, Air Conditioning, Water Conditioners, Oil Piping, Water Pumps and Steam Lines

Camco Water Heater Connector, 3/4 in FIP x 3/4 in FIP, 125 psi Maximum, Copper, 18 in Length

Camco Anode Rod, Series: 11572, 5/8 in Diameter, 42 in Length, Aluminum

WaterFlex Water Heater Connector, Corrugated, Flexible, 3/4 in Nominal, FIP Connection, 24 in Length, Stainless Steel, Blue/Red, IAPMO Certified, UPC Compliant

Camco Water Heater Element, High Watt Density, Series: 2343, 240 V, 4500 W Power, Screw-In Connection, Copper Tubing with Magnesium Oxide, Nickel Plated, Includes: Gasket, UL Listed, 15 in Diameter Tank

Plumer's Pack Thermodisc Contractor Pack, Includes: (2) High Watt Density Elements NO 02342 4500 W 240 V, (1) Tod Lower Thermostat NO 08122, (1) Tod Upper Thermostat NO 08162, For Professional Plumer