Continuous duty, thermally protected - split capacitor motor. Will lift water up to 25 ft of vertical height. Cast iron construction. Large 1-1/2 in discharge. Can be used as a utility pump by removing float switch. 4.9 A, 10 ft cord, side discharge, handles 3/8 in solids, stainless steel impeller.

Continuous duty, thermally protected split capacitor motor. Pumps will lift water up to 25 ft of vertical height. Rugged cast iron construction. Large 1-1/2 in discharge for high capacity pumping. Can be used as a utility pump by removing the float switch. 10 ft cord, handles up to 1/2 in solids, 7.6 A, Pumps up to 60 gpm/3600 gph. 3 years warranty from Superior Pump.

Continuous duty, thermally protected split capacitor motor, lifts water up to 25 ft vertical height, rugged stainless steel and cast iron construction, 2 in discharge for high capacity pumping, 1-1/2 in NPT adapter included, clog-resistant thermoplastic vortex impeller. Can be used as a utility pump by removing the float switch. Pumps up to 80 gpm to 4800 gph, handles 1/2 in solids, 3 years warranty from Superior Pump.

Continuous duty, thermally protected split capacitor motor. Pumps will lift water up to 25 ft of vertical height. Large 1-1/2 in discharge for high capacity pumping. Can be used as a utility pump by removing the float switch. 4.9 AMP, 10 ft cord, stainless steel impeller. Pumps up to 55 gpm/3300 gph. 3 years warranty from Superior Pump.

Thermoplastic base, fully adjustable automatic switch, non-corrosive steel drive shaft. Metal switch arm for strength and durability. 1-1/2 in discharge for high capacity pumping. For use in sump basins 12 in or larger. 10 ft cord, stainless steel impeller. 3.06 amp. Pumps up to 60 gpm/3600 gph. 1year warranty from Superior Pump.

Rugged cast iron construction, 3/4 in NPT suction and discharge, 10 ft power cord, built-in carrying handle. Includes brass garden hose adapters, suction strainer and an additional set of motor brushes. Uses drain water heaters, fill radiant heating systems, as a pressure booster, water transfer. Not recommended for use as a sprinkler pump. 8.4 A, pumps up to 25 gpm/1500 gph, 1 year warranty from Superior Pump.

Superior Pump Pre-Assembled Battery Backup Kit, Outlet Connection Size: 1-1/2 in, Pump Voltage Rating: 120 V, Back-up Voltage Rating: 12 VDC, Pump Current Rating: 4.1 A, Frequency Rating: 60 Hz, 1/3 hp, Number of Phases: 1, Pump Maximum Head: 25 ft, 46 gpm, Back-up Flow Rate: 23 gpm, Switch Type: Vertical, Cord Length: 10 ft, Cast Iron/Stainless Steel, 10.8 psi, Includes: 0.3 hp Sump Pump, 12 VDC Back-Up Pump, (2) 1-1/2 in Check Valves, Pipe and Fittings

Superior Pump Battery Back Up Kit, Suitable For Use With: Sump Pumps, 12 VDC, Tethered Switch, 10 ft Cord, 1-1/4 in Discharge Size, Thermoplastic. Works with 12 V lead-acid, deep-cycle marine/RV and AGM batteries. Recommended minimum 40 Ah rating. Example Orgill SKU 7151525, Superior Pump number 99717.

These self-priming transfer pumps are designed to easily transfer water from one point to another. Model PC1, 12 V transfer pump is convenient when normal power is not readily available. Typical applications include removing water from pool covers, clogged drains, stock tanks, water basins, boats, cisterns, etc.

Vertical switch, 115 V, 10 ft cord, CSA and CUS listed, energy-efficient PSC motor, rustproof impeller, 1-1/2 in FNPT discharge pipe, 3/8 in maximum solid handling.

Vertical switch, 115 V, 10 ft cord, CSA and CUS listed, energy-efficient PSC motor, rustproof impeller, 1-1/2 in FNPT discharge pipe, 3/8 in maximum solid handling.

1/3 hp split capacitor motor, high efficiency, low amp draw, corrosion-resistant plastic, 10 ft grounded waterproof power cord, pumps up to 48 gpm, 2880 gph, side and bottom intake provides for clog-resistant suction, vertical float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft vertical height, handles 3/8 in solids, 1-1/2 in female iron pipe discharge thread. 1 year warranty from Superior Pump Co.

This portable, submersible utility pump is designed for non-automatic use in water. The units are equipped with a 9 ft. 3-prong grounding type power cord. The discharge fitting is designed for convenient attachment to a garden hose, in a temporary application.

Wayne Battery Backup Sump Pump with Automatic Switch, 48 gpm, Maximum Lift Head: 15 ft, Outlet Connection Size: 1-1/2 in, 12 VDC, Cord Length: 8 ft, Impeller Material: Thermoplastic, Housing Material: Steel/Cast Iron, Installation Type: Submersible, Includes: Protective Battery Case

1/2 hp heavy-duty split capacitor motor, high efficiency, low Amp draw, rugged cast iron construction, 10 ft grounded waterproof power cord, pumps up to 70 gpm, 4200 gph, side and bottom intake provides for clog-resistant suction, tethered float switch with piggy back plug included, pump will lift water over 25 ft. vertical height, handles 1/2 in solids, 1-1/2 in female iron pipe discharge thread. 3 years warranty from Superior Pump Co.

These self-priming transfer pumps are designed to easily transfer water from one point to another. Model PC2, 120 V transfer pump is great for household usage. Typical applications include removing water from waterbeds, clogged sinks, basements and more. Do not use PC2 in pool areas. The motors on both models PC1 and PC2 are non-submersible.

Rugged stainless steel and zinc construction. Heavy-duty high efficiency motor. Piggy-back style switch for automatic or manual operation, for minimum 10 in sump diameter. Pumps up to 6000 gph. 8 ft grounded power cord. 1-1/2 in NPT discharge. CSA Certified.

Durable thermoplastic resists corrosion. Automatic operation, designed for minimum 14 in sump basins. Pumps up to 3200 gph. Dependable motor and float switch for automatic or manual operation. 1-1/2 in discharge and 8 ft power cord. Self-cleaning screen reduces maintenance. CSA certified.

Flotec's 1/2 hp sump pump with energy efficient design that produces high output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered On/Off float switch.

Flotec's 1/3 hp sump pump with energy efficient design that produces high output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered On/Off float switch.

Flotec's 1/4 hp sump pump with energy efficient design that produces high output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered On/Off float switch.

1/3 hp cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and rugged, cast iron pump base. Fully submersible. 1/3 hp, max flow rate is 3800 gph at 0 ft 1-1/2 in. NPT discharge. For use in 11 in. diameter or larger sump basins, 9 in ON level and 4 in OFF level.

Durable thermoplastic resists corrosion. Automatic operation, designed for minimum 10 in sump basins. Pumps up to3600 gph. Powerful motor with automatic thermal overload protection. 1-1/2 in discharge and 8 ft power cord. Self-cleaning screen reduces maintenance. CSA certified.

1/3 hp split capacitor motor, high efficiency, low Amp draw, rugged cast iron construction, 10 ft grounded water proof power cord, pumps up to 46gpm, 2760 gph, side and bottom intake provides for clog-resistant suction, tethered float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft vertical height, handles 3/8 in solids, 1-1/2 in female iron pipe discharge thread. Stainless steel impeller. 3 years warranty from Superior Pump Co.

Durable thermoplastic resists corrosion. Automatic operation, designed for minimum 14 in sump basins. Pumps up to 3600 gph. Powerful motor with automatic thermal overload protection. 1-1/2 in discharge and 8 ft power cord. Self-cleaning screen reduces maintenance. CSA certified.

Rugged stainless steel and cast iron construction. Heavy-duty high efficiency motor. Piggy-back style switch for automatic or manual operation, for minimum 10 in sump diameter. Pumps up to 6300 gph. 8 ft grounded power cord. 1-1/2 in NPT discharge. CSA Certified.

1/3 hp split capacitor motor, high efficiency, low Amp draw, corrosion-resistant plastic, 10 ft grounded water proof power cord, pumps up to 48 gpm, 2880 gph, side and bottom intake provides for clog-resistant suction, tethered float switch with piggy back plug included, cooler operating 115 V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8 in solids, 1-1/2 in female iron pipe discharge thread. 1 year warranty from Superior Pump Co.

1/2 hp coated steel and reinforced thermoplastic submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and corrosion-resistant, thermoplastic pump base. Fully submersible. 1/2 hp, max flow rate is 3900 at 0 ft 1-1/2 in NPT discharge. For use in 11 in. diameter or larger sump basins.

Automatic submersible sump pump. Ideal for use in basins 14 in Dia or greater with light water removal needs. Reinforced thermoplastic pump housing and base are corrosion and rust-resistant. Tethered float switch provides reliable automatic operation. 2900 gph.

Automatic submersible sump pump. Maximum pumping capacity to 400 gph. Rugged thermoplastic body resists corrosion, impact, stress and heat. Tethered float switch designed for minimum 14 in Dia sump basin. 1-1/2 in NPT discharge, coupling included. Easy installation, replaced pedestal or submersible sump pumps. CSA certified.

1/3 hp split capacitor motor, high efficiency, low draw, rugged cast iron construction, 10 ft grounded water proof power cord, pumps up to 46 gpm, 2760 gph, side and bottom intake provides for clog-resistant suction, vertical float switch with piggy back plug included, cooler operating 115 V motor provides continuous duty, pump will lift water over 25 ft vertical height, handles 3/8 in solids, 1-1/2 in female pipe discharge thread. Stainless steel impeller. 3 years warranty from Superior Pump Co.

3/4 hp cast iron and stainless steel submersible sump pump. Assembled in the US with foreign and domestic parts. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Stainless steel motor housing and rugged, cast iron pump base. Fully submersible. 3/4 hp, max flow rate is 4600 gph at 0 ft 1-1/12 in NPT discharge. For use in 11 in Dia or larger sump basins. 9 in ON level and 4 in OFF level.

For use in sump basins 12 in or larger. Thermoplastic base, fully adjustable automatic switch, steel drive shaft, metal switch arm, 1-1/4 in discharge. Current rating of 2.76 A, 10 ft cord. Pumps up to 50 gpm/3000 gph. 1 year warranty from Superior Pump.

1/3 hp split capacitor motor, high efficiency low Amp draw, 10 ft grounded waterproof cord, pumps up to 40 gpm, 2400 gph, side and bottom intake provides for clog-resistant suction, tethered float switch with piggy back plug included, cooler operating 115 V motor provides continuous duty, pump will lift water over 25 ft. vertical height, 1-1/4 in male iron pipe discharge thread, 1-1/4 in female pipe adapter and 1-1/2 in male iron pipe adapter included. 1 year warranty from Superior Pump Co.

1/3 hp coated steel and reinforced thermoplastic submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and corrosion-resistant, thermoplastic pump base. Fully submersible. 1/3 hp max flow rate is 3600 gph at 0 ft. 1 1/2 NPT discharge. For use in 11 in Dia or larger sump basins.

1/2 hp cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and rugged, cast iron base. Fully submersible. 1/2 hp, max flow rate is 4200 gph at 0 ft 1-1/2 in NPT discharge. For use in 11 in Dia or larger sump basins. 9 in ON level and 4 in OFF level.

Corrosion-resistant zinc construction, dissipates heat quickly and extends motor life, uni-body motor housing eliminates leak points, stainless steel fasteners, Quadra-Seal? technology provides excellent motor protection, smooth flow hydraulics delivers excellent performance, vertical float switch operates in a 10 in or larger sump basin, pumps up to 6660 gph maximum lift of 29 ft.

1/2 hp heavy-duty split capacitor motor high efficiency low Amp draw, corrosion-resistant plastic, 10 ft grounded waterproof power cord, pumps up to 55 gpm, 3300 gph, side and bottom intake provides for clog-resistant suction, vertical float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8 in solids, 1-1/2 female iron pipe discharge thread. Stainless steel impeller. 3 years warranty from Superior Pump Co.