Rubberized clamping arms for added protection. Compatible with T43601 portable LED work light. Mounts laser levels, flood lights and camera tripod arms to a quick-support od. Metal arm extends out 12 in (30.5 cm). Adjustable to several different angles. Can be set up and ready to use within seconds. Unique to the Task QSR system.

Task QSRs are versatile, strong and easy-to-use. QSRs are indispensable when installing drywall, crown molding, cabinets, trim, sinks and more. They can be used as temporary safety supports or grab rails and they make installing dust barriers or backdrops quick and easy.

Task QSRs are versatile, strong and easy-to-use. QSRs are indispensable when installing drywall, crown molding, cabinets, trim, sinks and more. They can be used as temporary safety supports or grab rails and they make installing dust barriers or backdrops quick and easy.

Task QSRs are versatile, strong and easy-to-use. QSRs are indispensable when installing drywall, crown molding, cabinets, trim, sinks and more. They can be used as temporary safety supports or grab rails and they make installing dust barriers or backdrops quick and easy.

This nylon storage bag holds up to 4 long QSRs or a larger number of medium and short QSRs. It features 600 x 300D ballistic nylon and webbed carry handles.

Replacing the standard gripper pad with either of these soft pads enhances traction on wet surfaces and protects delicate surfaces. These extra wide pads evenly distribute force over a large area.

Extends any quick support rod by 18 in.

Metal spring clamps with Hard Plastic-grip pads.

With 600 lb of sustained clamping pressure/holding force, the Irwin? QUICK-GRIP? XP600 (extreme pressure) is the most powerful one-handed bar clamp available. It's ideal for heavy-duty applications such as installation, demolition and rough glue-up. Dual-locking swivel jaws with removable, non-marring full-face pads provide even distribution of clamping force on the workpiece. The pads can be easily removed to activate the swivel jaws to maintain full contact and combat flexing at extreme pressure or for conforming to irregular shapes. An adjustable foot provides added support so the clamp can sit upright on a table or work surface, making it ideal for gluing panels or cabinetry. Plus, the unique pistol grip design and Quick-Release? trigger provide simple, one-handed operation. The Irwin QUICK-GRIP XP600 one-handed bar clamp delivers maximum power, versatility and stability.

Clutch lock steel bar clamp with soft-grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat depth of 3-1/8 in.

Irwin Bar Clamp, 300 lb Weight, Maximum Opening Size: 6 in, Throat Depth: 3-3/16 in, Body Material: Steel, Body Color: Blue, Spindle Material: Plastic

Quick-Release' trigger allows for fast and easy positioning and release. Patented ratcheting mechanism provides adjustable clamping pressure and significantly reduces hand force required to generate clamping pressure. High-tech resin construction provides strength and durability. Specially designed jaws hold odd-shaped workpieces.

Clutch lock steel bar clamp with soft-grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat depth of 3-1/8 in.

Clutch lock steel bar clamp with soft-grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat depth of 3-1/8 in.

With 600 lb of sustained clamping pressure/holding force, the Irwin? QUICK-GRIP? XP600 (Extreme pressure) is the most powerful one-handed Bar clamp Available. It is ideal for heavy-duty applications such as installation, demolition and rough glue-up. Dual-locking swivel jaws with removable, non-marring full-face pads provide even distribution of clamping force on the workpiece. The pads can be easily removed to activate the swivel jaws to maintain full contact and combat flexing at extreme pressure or for conforming to irregular shapes. An adjustable foot provides added support so the clamp can sit upright on a table or work surface, making it ideal for gluing panels or cabinetry. Plus, the unique pistol grip design and Quick-Release? trigger provide simple, one-handed operation. The Irwin QUICK-GRIP XP600 one-handed bar clamp delivers maximum power, versatility and stability.

Metal spring clamps with soft-grip pads.

Designed for one hand use. Soft, pliable pads protect fine finishes. Constructed from the same high-tech resin material as Quick-Grip bar clamps, strong, lightweight and rust resistant. Jaw contoured to hold round and odd-shaped objects. Handles designed for comfortable hand span.

Designed for one hand use. Soft, pliable pads protect fine finishes. Constructed from the same high-tech resin material as Quick-Grip bar clamps, strong, lightweight and rust resistant. Jaw contoured to hold round and odd-shaped objects. Handles designed for comfortable hand span.

Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use without damaging the work surface.

Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use without damaging the work surface.

Ideal for clamping or gluing, holding work for sawing or drilling and positioning work for fastening. 25% smaller for working in contained areas or small projects. Constructed of high-tech reinforced resin for strength and durability. Exerts up to 150 lb of clamping pressure. Patented pistol grip design enhanced comfort and ease of use. Non-marring pads grip firmly and protect work. Throat depth of 2-7/16 in. Includes two clamps per card.

Constructed of high-tech reinforced resin for strength and durability. These clamps are 25% smaller for working in confined spaces. Exerts up to 150 lb of clamping pressure. Pistol grip design enhances comfort and ease of use. Non-marring pads grip firmly and protect work. Throat depth of 2-7/16 in.

Designed to hold materials up to 3 in thick, at 90 deg angle.

Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue.

Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue.

Fast Release' locking C-clamp with regular tips. Easier to open, has a no-pinch release and offers more finger room. Wide-opening jaws provide greater versatility in clamping a variety of shapes. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.

Fast Release' locking C-Clamps with regular tips. Easier to open, has a no-pinch release and offers more finger room. Wide-opening jaws provide greater versatility in clamping a variety of shapes. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.

The Vulcan spring clamp is for use whenever quick clamping and light pressure is required. It comes in assorted neon colors.

Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue.

Metal spring clamps with soft-grip pads.

Clutch lock steel bar clamp with soft-grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat depth of 3-1/8 in.

Locking mechanism guarantees no slippage. Jaws open wide for versatility.

Locking mechanism guarantees no slippage. Jaws open wide for versatility.

Corner clamp is ideal for picture frames and smaller projects.

Constructed of high-tech reinforced resin for strength and durability. These clamps are 25% smaller for working in confined spaces. Exerts up to 150 lb of clamping pressure. Pistol grip design enhances comfort and ease of use. Non-marring pads grip firmly and protect work. Throat depth of 2-7/16 in.

Constructed from high-tech resin material, they are strong, lightweight and durable. Soft pads protect work surfaces. Positive locking action to hold work tight. Can be used with one hand. Ideal for clamping small and odd shapes securely. Applies gradual even pressure. Quick-release trigger lets go with a squeeze. Smaller, for tight work spaces. Throat depth of 2-7/16 in. Includes two #546 ( 693.4822) bar clamps.

Irwin Bar Clamp, Maximum Opening Size: 4-1/4 in, Throat Depth: 1-3/16 in, Body Material: Plastic Resin/Steel

Designed for one hand use. Soft, pliable pads protect fine finishes. Constructed from the same high-tech resin material as Quick-Grip bar clamps, strong, lightweight and rust resistant. Jaw contoured to hold round and odd-shaped objects. Handles designed for comfortable hand span.

Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use without damaging the work surface.

Locking mechanism guarantees no slippage. Jaws open wide for versatility.

New clutch system eliminates the need for threaded pipe. Larger feet offer more stability and clearance between handle and worktop. Larger, more ergonomic handle. Larger clutch plates allow for easier release and increased durability and dependability.

Quick-Release' trigger allows for fast and easy positioning and release. Patented ratcheting mechanism provides adjustable clamping pressure and significantly reduces hand force required to generate clamping pressure. High-tech resin construction provides strength and durability. Specially designed jaws hold odd-shaped workpieces.

With 600 lb of sustained clamping pressure/holding force, the Irwin? QUICK-GRIP? XP600 (Extreme pressure) is the most powerful one-handed Bar clamp Available. It is ideal for heavy-duty applications such as installation, demolition and rough glue-up. Dual-locking swivel jaws with removable, non-marring full-face pads provide even distribution of clamping force on the workpiece. The pads can be easily removed to activate the swivel jaws to maintain full contact and combat flexing at extreme pressure or for conforming to irregular shapes. An adjustable foot provides added support so the clamp can sit upright on a table or work surface, making it ideal for gluing panels or cabinetry. Plus, the unique pistol grip design and Quick-Release? trigger provide simple, one-handed operation. The Irwin QUICK-GRIP XP600 one-handed bar clamp delivers maximum power, versatility and stability.

This classic face clamp offers increased reach and clamping capacity. Features a 3 in reach and clamps materials up to 2-3/4 in thick. Classic face clamps are designed for creating perfectly flush Kreg Joints and they work great for lots of other shop and project tasks that require solid clamping without marring. These clamps feature large clamp pads that distribute clamping force evenly and hold pieces flush during assembly. When used in Kreg Joinery, the extra-large clamp face gets positioned on the "show" side of the joint.

Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue.

With 600 lb of sustained clamping pressure/holding force, the Irwin? QUICK-GRIP? XP600 (Extreme pressure) is the most powerful one-handed Bar clamp Available. It is ideal for heavy-duty applications such as installation, demolition and rough glue-up. Dual-locking swivel jaws with removable, non-marring full-face pads provide even distribution of clamping force on the workpiece. The pads can be easily removed to activate the swivel jaws to maintain full contact and combat flexing at extreme pressure or for conforming to irregular shapes. An adjustable foot provides added support so the clamp can sit upright on a table or work surface, making it ideal for gluing panels or cabinetry. Plus, the unique pistol grip design and Quick-Release? trigger provide simple, one-handed operation. The Irwin QUICK-GRIP XP600 one-handed bar clamp delivers maximum power, versatility and stability.

New clutch system eliminates the need for threaded pipe. Larger feet offer more stability and clearance between handle and worktop. Larger, more ergonomic handle. Larger clutch plates allow for easier release and increased durability and dependability.

Irwin QUICK-GRIP Bar Clamp/Spreader, 300 lb Weight, Maximum Opening Size: 36 in, Throat Depth: 3-3/16 in, Body Material: Steel, Lock Type: Quick-Release Trigger

Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads.

Irwin QUICK-GRIP Bar Clamp/Spreader, 300 lb Weight, Maximum Opening Size: 24 in, Throat Depth: 3-3/16 in, Body Material: Steel, Lock Type: Quick-Release Trigger

Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue.

Made of forged iron. Can hold up to 3000 lb of clamping pressure. Provides top clamping pressures for heavy-duty jobs. Clamping capacity of 4-1/4 in and throat depth of 2-1/2 in.

Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads.

Quick-Release' trigger allows for fast and easy positioning and release. Patented ratcheting mechanism provides adjustable clamping pressure and significantly reduces hand force required to generate clamping pressure. High-tech resin construction provides strength and durability. Specially designed jaws hold odd-shaped workpieces.