7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
The HTX50 delivers the proven performance of the HT50 with upgraded ergonomics. The high impact molded handle with rubber anti-slip hand grip delivers confidence and performance on any job. A unique handle guard protects the operator's hand from mishaps and the rear loading, two strip capacity magazine minimizes reloading breaks. A chromed steel housing and hardened steel working parts complete this tool's impressive features.
T25 staples feature a round crown design that secures wires without damaging them. The leading choice for low voltage wire applications, the T25 staple is an absolute boss when installing garage door openers, thermostat wire, doorbell wire, alarm systems and much more. Also works great on computer, CAT5/CAT6. RG6/RG9, COAX and phone cables. All Arrow T25 staples are made under strict quality controls at our Saddle Brook, NJ manufacturing plant.
JT21 staples are the T50's little brother. Although often referred to as light duty, there's really nothing "Light" about them. Built with the same quality and precision as the T50, these staples utilize a thinner wire in a smaller staple format to deliver great holding power. They are exceptionally easy to fire, making JT21 staples a favorite with crafters, women and those with limited grip strength. Used for general home repairs, crafting, art projects and upholstery. Still proudly made in the USA.
The HT55 is Arrow's top-selling slim Hammer tacker. The lightweight, stamped steel housing is precisely balanced to deliver quick, powerful strikes. The ergonomic rubber handle with integrated hand stop means the operator's hand won't slip and a rugged rear load magazine holds two full strips of staples, minimizing downtime for reloading. HT55 is great for insulation, flooring and roofing applications where speed and ease of use are key.
Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in.
7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
AntiJam' design for maximum productivity. Long reach knuckle saver handle with non-slip comfort grip. Die-cast frame and hardened components for extreme durability. High-capacity bottom load magazine with staple count indicator. Extra-wide foot plate prevents tearing and marring. Uses STCR5019, Sku # 744.7915, 'PowerCrown' staples. Use for roofing felt, tar paper, house wrap, insulation, carpet pad and plastic sheeting. Weighs 2.2 lb and stores up to 168 staples (2 full sticks).
ITW Ramset powder loads and tools match tolerances to provide optimum power within recognized national velocity standards. Power level is designated by the load level number marked on each box also by the color of the box and each powder load. As the number increases, the power level increases.
Ideal for everyday stapling needs around the home or office. Lightweight with convenient handle lock. Quick clear mechanism. Chrome-plated steel construction. Uses 1/4 in and 5/16 in light-duty staples.
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
The Arrow JT21CM features an all chromed steel housing, jam resistant mechanism, proven rear load magazine and steel working parts hardened in a 1500 deg furnace. A rugged coil spring gives this tool the power and performance one would expect from a much larger stapler- in a smaller fine wire format. And a convenient staple viewing window indicates when staples are running low.
Arrow's iconic model T50 is America's top-selling staple gun. It features an all chromed steel housing, jam-resistant mechanism, powerful coil spring, staple viewing window and steel working parts hardened in a 1500 deg furnace. The number one choice of generations of professionals and homeowners alike, the Arrow T50 has become legendary for its uniquely American blend of functionality, dependability and sheer ruggedness.
For residential roofing and sidewall applications. The first hammer tacker to deliver a cap and staple. Easy-to-use - just pull the trigger and drive it in. Gets the job done for a fraction of the cost of a pneumatic tool. Promotes best practice installation. Capacity of 168 caps to 168 staples, full 1 in plastic cap, A11 fasteners, 3/8 in staples. Weighs 2.6 lb.
Arrow brad nails are small 18 ga nails up to 2 in long. Because they are thinner in cross section, they are less likely to split decorative molding as they leave a very small hole.
7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
Coated to improve corrosion resistance in treated lumber and other applications. Fits most powder actuated tools that use 22 cal. Features single shots of 27 cal. Shank diameter of 0.145 in.
T50 staples are the world's top-selling heavy-duty staple platform. Made to deliver exceptional holding power, these staples are used for all heavy-duty stapling applications - from installing insulation, housewraps and roofing underlayments to upholstering fine furniture and window treatments. A true workhorse of a fastener, Arrow T50 staples are made to precise specifications on state-of-the-art equipment at our manufacturing plant in Saddle Brook, NJ, USA.
Lightweight die-cast aluminum design with steel handle, over molded rubber grip for comfort and convenient bottom loading for quick and easy reloading. Nickel chrome-plated steel magazine. Used for house wrap, tar paper. Weighs 1.9 lb. Magazine capacity of 84 staples, 1/4 to 9/16 in STCR5019 series Power Crown staples. Orgill Sku #160.8504, #341.8647, #433.9438 and #744.7915.
T50 staples are the world's top-selling heavy-duty staple platform. Made to deliver exceptional holding power, these staples are used for all heavy-duty stapling applications - from installing insulation, housewraps and roofing underlayments to upholstering fine furniture and window treatments. A true workhorse of a fastener, Arrow T50 staples are made to precise specifications on state-of-the-art equipment at our manufacturing plant in Saddle Brook, NJ, USA.
7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
