For two and four-cycle engines. Solvent-based bond fully seals within 20 mins. Forms a tough flexible bond that is highly effective on irregular and uneven joint surfaces. Resists gasoline and other damaging fluids. Withstands temperatures 350 deg F continuous, 400 deg F intermittent.

Slow drying, non-hardening sealant designed for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. -65 to 400 degrees Fahrenheit temperature range. Resists common shop fluids and fuels. Use where sealing is more important than adhesion for valve cover and oil pan gaskets. Use on gaskets, flanges, pipe joints and threaded connections.

Fast drying, hard-setting sealant designed for sealing rigid materials and flanges, or patching holes and joints where permanent assembly is desired. -65 to 400 degrees Fahrenheit temperature range. Resists common shop fluids and fuels. Use for freeze plugs, threaded connections and manifold gaskets. Use on cork, metal, plastic, gaskets, pipes and flanges.

Formulated for hi-temp applications or heavy-duty use. Replaces almost any cut gasket by making reliable formed-in-place gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temperature range -65 to 650 deg F intermittent, resists auto and shop fluids.

Resists water, gas and oil leaks. Use for carburetors, water pumps, transmissions, fuel pumps and more. Shrink wrapped.

Complete kit contains everything required for making professional quality permanent repairs in just minutes. Includes state-of-the-art components and easy-to-follow instructions with photographs to make quick permanent repairs to leaks in all types of metal fuel tanks. It repairs cracks up to 4 in long and holes up to 3/8 in Dia. Repair will be complete when the resin cures in 30 min. Tank may be refilled after 30 min or when the repair is tack-free. The repair resin is designed to harden within 8 to 10 min and cures in 30 min. Repairs can be made ideally at temperatures from 50 to 75 deg F. Repairs made at lower temperatures will take longer to cure. Repairs can be made on slow leaking cracks up to 4 in in length and holes up to 3/8 in in Dia.

Easily forms 100% RTV silicone rubber gaskets for mechanical repair and household use. Forms a durable, waterproof seal. Stays flexible. Won't crack, crumble or dry out. Withstands extreme temperatures and pressure. Unaffected by vibration. Resistant to oil, grease and fuels. Requires no mixing.

Permatex? clear silicone adhesive sealant is a general-purpose, single component, room temperature vulcanizing (RTV) compound, designed for the sealing of mechanical assemblies. Upon curing from the exposure to moisture in the air, this non-sagging paste forms a tough, flexible, waterproof seal of silicone rubber, which resists aging, weathering and thermal cycling without hardening, shrinking or cracking.

Wicking action silicone "seeks the leak". Flows into hidden and hard-to-reach areas. Forms a tough, waterproof, durable, clear seal that is resistant to weather, extreme temperatures, vibration, shock and most shop chemicals. Fills surface voids and irregularities. Temperature range -80 to 400 deg F.

Designed specially for high-torque and high-vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers performance requirements. Sensorsafe, low odor and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Guaranteed not to leak.

The original quality formula, a hard setting, economical sealant. Seals all common gasketing materials in low temperature and low pressure applications. Temperature range of 65 to 350 deg F. Resists diesel fuels and most shop fluids.

Slow drying, non-hardening sealant approved for use in aviation as well as automotive applications. Temperature range -65 to 400 deg F. Resists gasoline, oil and grease.

Fast-drying, hard-setting sealant designed for sealing rigid materials and flanges or patching holes and joints where permanent assembly is desired. Temperature range -65 to 400 deg F. Resists common shop fluids and fuels.

Complete kit contains everything required for making professional quality permanent repairs in just minutes. State-of-the-art components and easy-to-follow instructions with photographs. Repairs all types of plastic tanks. The repair resin is designed to harden within 8 to 10 min and cures in 30 min. Repairs can be made ideally at temperatures from 50 to 75 deg F. Repairs cracks up to 4 in long and holes up to 3/8 in Dia.

For dealership warranty requirements, Ultra Black? ensures extended drivetrain warranty compliance. Fast curing formula. Sensor safe, low odor, non-corrosive. Meets performance specs of OE silicone gaskets. Retains high-flexibility, oil-resistant properties through use of a patented adhesion system. Temperature range -65 to 500 deg F intermittent resists auto and shop fluids and vibration.

For high operating temperatures common in 4-cylinder, turbocharged or high-performance engines. The most advanced, high temp RTV silicone gasket available. Sensor safe, low odor, non-corrosive. Superior adhesion. 3X more oil-resistant than conventional silicones, 8X more flexible than cut gaskets. Temperature range 65 to 700 deg F intermittent resists auto and shop fluids and vibration.

The high temp first generation gasket maker formulated for oxygen sensor equipped engines. Temperature range of -65 to 650 deg F intermittent. Resists auto and shop fluids.

For dealership warranty requirements, Ultra Black? ensures extended drivetrain warranty compliance. Fast curing formula. Sensor safe, low odor, non-corrosive. Meets performance specs of OE silicone gaskets. Retains high-flexibility, oil-resistant properties through use of a patented adhesion system. Temperature range -65 to 500 deg F intermittent resists auto and shop fluids and vibration.

Low odor formula. General-purpose, black RTV indoor/outdoor sealant. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops. Protects and repairs electrical wiring. May be applied to horizontal or vertical surfaces. Waterproof and flexible. Temperature range -75 to 450 deg F (-59 to 232 deg C), resists water, weather and vibration.

Seals parts and prevents leakage. Shrink wrapped.

Specially formulated to withstand the harsh gear oil environment found in differentials and transfer cases. Because gear oil has friction modifiers that break down normal RTV and cause leaking, this specialty silicone has been tested to OEM specifications to ensure complete sealing. As a gasket maker, it seeks and seals leak paths that cut gaskets cannot. It can also be used to seal cut gaskets.

Specially formulated for superior fluid resistance, this polyester urethane-based gasketing compound withstands extreme temperature changes without hardening. Its non-setting, non-hardening character remains tacky even with rapid changes in temperature, enabling repeated assembly and disassembly of parts. Suitable as either a gasket maker or dressing, PermaShield? seals surface imperfections between metal parts and is ideal in high-performance applications. With an operating temperature range of -60 to 500 deg F, this compound resists common engine fluids, including oil, gasoline, ethanol, water and anti-freeze and prevents contamination from moisture and dust.

Developed with U.S. Automotive OEMs and complies with extended warranty requirements. It resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Benefits include improved transmission oil resistance, good adhesion while retaining flexibility, sensor safe, noncorrosive and can be used as a gasket maker or dressing. Non-flammable, non-toxic, low odor.

A noncorrosive, sensor safe RTV silicone gasket material formulated specifically for water pumps and thermostat housings. Highest water-glycol resistance available in an RTV silicone.

Permatex? ultra silicones were developed to meet todays technology changes. Sensor safe, low odor, noncorrosive. Outstanding oil resistance and joint movement tolerance. Eight times more flexible than cork/composite gaskets, three times more oil-resistant than conventional silicones. Temperature range -65 to 500 deg F intermittent. Resists auto and shop fluids and vibration.

Seals parts and prevents leakage. Use for oil pan, fuel pump, timing cover, various mountings and housings.