US Hardware Round Light, Specifications: 26 in to 48 in Adjustable, Dimensions: 36 in L

Features ultrasonically welded acetal. 1/4 in NPT thread female.

Features chrome-plated brass. 461 CRC.

Die-cast Zamak with perm-plate chrome finish. 1-1/8 in inside Dia. Plated steel nuts and washers included. Made from long-lasting stainless steel 7/16 in stock. Makes an ideal ski tow hook. Maximum load 3500 lb.

US Hardware Fuel Line Connector, Specifications: 1/4 in Barb, Brass, Chrome

Perma-plated chrome Zamak. 1 in inside eye Dia. Nut and washer included. Up to 2500 lb. pull.

US Hardware Air Horn Refill, Specifications: 8 oz Size

Recommended for boats up to 12 m. Non-flammable, no CFC's. Good for over 80 blasts. Ideal for marine safety sporting events.

Recommended for boats up to 12 m. Non-flammable, no CFC's. Good for over 80 blasts. Ideal for marine safety sporting events.

Cam-action neoprene plugs. Snap shut to form a leak-proof stopper for Livewells or Baitwells.

US Hardware Hose Barb, Specifications: 1/4 in MNPT, Brass

US Hardware Drain Plug, Corrosion-Resistant, Stainless Steel, Suitable for: 1 in Dia Drain

US Hardware Mobile RV Boat Cleat, Heavy-Duty, 6 in, Screw Mounting, Dimensions: 6 x 1 x 1-1/4 in, Nylon, Black

US Hardware Mobile RV Boat Cleat, Screw Mounting, Dimensions: 8 in L x 1-1/2 ft W x 1-3/4 H, Nylon, Black

US Hardware Mobile RV Boat Cleat, 4-1/4 in, Screw Mounting, Dimensions: 4-1/4 x 7/8 x 1 in, Nylon, Black

Cam-action neoprene plugs. Snap shut to form a leak-proof stopper for Livewells or Baitwells.

Old style Herreshoff hollow base screw-mount cleats. Stainless steel, 6 in L x 1-7/8 in W x 1-1/4 in H. Pre-drilled for 1/4 in screws.

Black molded rubber stops. Dimensions - 3 in long with 3 in Dia at ends and 1-1/2 in Dia at middle.

Black molded rubber stops. Dimensions: 2-1/2 in W x 3-1/2 in D x 2 in H with 4 in opening.

Designed to connect threaded parts to hose. Brass hose barbs. Thread size of 1/4 in NPT.

US Hardware Tank Vent Elbow, Specifications: 1/4 in Male x Female, Brass

Designed to connect threaded parts to hose. Brass hose barbs. Thread size of 1/8 in NPT.

Designed to connect threaded parts to hose. Brass hose barbs. Thread size of 1/8 in NPT.

Designed to connect threaded parts to hose. Brass hose barbs. Thread size of 1/4 in NPT.

Designed to connect threaded parts to hose. Brass hose barbs. Thread size of 1/4 in NPT.

Chrome-plated. 12 VDC only. Maximum panel thickness 1 in.

Brass hose to connect two pieces of hose together.

Cast iron coated with thermal bond PVC vinyl. Non-toxic powder which helps it soak into the anchors.

One-mile side light, for boats up to 12 m length. Light with combination red/green lens is a popular choice for installation on bass boats.

Features brass construction.

Features ultrasonically welded acetal.

Cam-action neoprene plugs. Snap shut to form a leak-proof stopper for Livewells or Baitwells.

Brass. For 1 in Dia drains.

Panel-mounted rocker switch for use with pump that draws 10 A or less. 1/4 in spade terminals. 6 V through 32 VDC only.

Pre-drilled to accommodate four #6 screws. Durable chrome-plated brass ring is small enough to fit on most hatches, cabinets and drawers.

Die-cast Zamak? with perma-plate chrome finish. Base is pre-drilled for four #10 fasteners.

Features a swivel cover that protects the socket when light is stowed away. Socket is non-corrosive, plastic base extends just 3 in below deck when installed. Pre-drilled with three countersunk holes for #10 screws. 1-3/8 in hole Dia.

Features ultrasonically welded acetal.

Features ultrasonically welded acetal.

Panel-mounted rocker switch for use with pump that draws 10 A or less. 1/4 in spade terminals. 6 V through 32 VDC only.

All round light. Rubber storage clips hold pole when not in use. Nickel-plated brass finish washer suitable for up to #8 fastener.

US Hardware Two-Position Switch, 2-Wire Marine, Specifications: 12 VDC, Chrome

Plastic handle with black thermoplastic body. Rated for 5 A load, 15 A inductive load. 12 VDC only. 1-3/8 in x 3/4 in.

Cam-action neoprene plugs. Snap shut to form a leak-proof stopper for Livewells or Baitwells.

Die-cast Zamak? with perma-plate chrome finish. Base is pre-drilled for four #8 fasteners.

Molded one-piece construction of white marine vinyl. Smooth, round shape assures fewer hull abrasions. Grommets are integrally molded into each end to allow easy vertical or horizontal use.

For boats up to 39.4 ft length. Die-cast Zamak with perma-plate chrome finish. Light includes one 7.5 W lamp. Base is pre-drilled with two countersunk holes for #8 screws. Size 1-3/8 in x 2-3/4 in x 2-1/2 in.

Brass. For 1 in Dia drains.

For OMC, Johnson and Evinrude. Features ultrasonically welded acetal. 3/8 in Barb.

Fits most engines with side water inlets. Flushes away sand, silt, salt and alkali. Prevents clogging and corrosion, extending the engine life. Installs in seconds without tools.

US Hardware Drain Plug, Stainless Steel, Suitable for: 1 in Dia Drain

Fuel connector, male for OMC engines. Brass construction and 1/4 in NPT thread.

Replace ultra-flow bulb. Large alcohol compounded primer bulb for 3/8 in fuel line assemblies. Reduces flow restriction for maximum flow.

Pumps water level down to 3/8 in. Comes with compact 3/4 ID hose with 3-5/16 in high. For use with 12 VDC systems only. Outputs 600 gph at 0 deg rise. Will perform at reduced capacity up to 3 ft rise.