Forney Wheel Kit, Diamond, Specifications: 30000 rpm, Includes: (2) Forney 60249 3/4 in Diamond Wheels and 1/8 in Mandrel

20-piece set with assorted shapes and sizes of nickel bonded diamond points. Shank of size 1/8 in (3.18 mm). Excellent for deburring, etching and smoothing of glass, plastic, ceramics and metals. Maximum speed rating of 30,000 rpm.

1001 household, hobby and project uses are cut, saw, sand, grind, drill, polish, buff, sharpen, clean and more. Variable speed of 8000 to 30,000 rpm. 1/8 in collet accepts all standard rotary tool accessories. Separate On/Off and speed control switches. Spindle lock for quick bit changes. Voltage rating of 120 V at 60 Hz, current rating of 1 A, no load speed rating of 8000 to 30,000 rpm, collet size of 1/8 in. Weighs only 1.2 lb. 40-piece accessory set includes 10 aluminum-oxide grinding stones, seven cut-off wheels, eight sanding discs, one aluminum-oxide grinding wheel, 1-1/2 in sanding drum, three sanding bands, two felt polishing wheels, three engraving cutters, two mandrels, one 1/8 in (3 mm) drill bit, one dressing stone, one wrench and one accessory storage case.

The Dremel? EZ Drum? mandrel makes sanding band changes easy as pull-place-secure. The one-piece drum mandrel design streamlines the process of changing sanding bands and makes it easy to sand flat surfaces and edges. Compatible with all Dremel? rotary tools.

A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).

A versatile, high-quality cutter made of high-grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. Appropriate for curved surfaces. Bit diameter of 7/32 in (5.6 mm).

A versatile, high-quality cutter made of high-grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. 1/8 in bit Dia (3.2 mm).

The Dremel? 3100 is the result of upgrading our most popular rotary tool using user-requested features to improve the tool's design and ergonomics. The tool also features the EZ Twist? nose cap with an integrated wrench that allows the nose cap to be used as a wrench to tighten accessories and eliminates the need for a separate wrench. A more efficient fan design and side vents provide a cooler running tool making it comfortable for extended periods of use. The tool also features a symmetrical design including a trumpet-shaped nose cap to facilitate a pencil-grip tool hold. The ability to use all existing Dremel? rotary tool accessories and most attachments let the 3100 complete a wide range of applications including cutting, grinding, sanding, carving and polishing a variety of materials.

High-speed cutter tipped with diamond particles tapered to a bullet point for fine detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel.

Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed.

This diamond-impregnated core-style bit features great long life and is ideal for drilling in both flat and contoured surfaces. Diamond grit a full 360 deg around the circumference of the bit allows it to be used in a rasping action to enlarge a hole if needed. Holes on the side of the bit allow the removal of glass dust from inside the bit. Each bit is packaged with Dremel? cutting oil to increase the speed of cut and prevent damage to the bit from overheating.

This diamond-impregnated core-style bit features great long life and is ideal for drilling in both flat and contoured surfaces. Diamond grit a full 360 deg around the circumference of the bit allows it to be used in a rasping action to enlarge a hole if needed. Holes on the side of the bit allow the removal of glass dust from inside the bit. Each bit is packaged with Dremel? cutting oil to increase the speed of cut and prevent damage to the bit from overheating.

The Dremel? chuck holds accessories without using a collet eliminating having to use a wrench and creating quick and easy accessory changes. Ideal when the application requires numerous accessory changes.

A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).

This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.

Replaceable bit for the 290 Dremel? (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving.

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel? 335-01 plunge router attachment, Dremel? 231 shaper/router table and also older router attachments #230 and #330. Made of high-speed steel.

A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.

The 670 mini saw attachment is a unique, innovative rotary tool accessory that allows you to cut through wood and wood like materials as never before. Attaches to the rotary tool in seconds and makes clean, straight, perpendicular cuts up to 1/4 in thick. Can be used for DIY projects, hobbies, crafts and modeling.

The 426 cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Cut-Off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver.

Our powerful tile cutting tool is ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. And if you're feeling creative, you can even use the tool to create a decorative design in your tiles. Just use the tile cutting bit to carve your design, like a sailboat, then fill the grooves with colored grout.

For cutting metal. One-piece mandrel design simplifies process of changing cutting wheels, eliminates the need for screw and screwdriver. Effortless locking and loading, no tiny mandrel to lose. Compatible with all Dremel rotary tools. Includes No.EZ402 Mandrel and (5) No.EZ456 cutting wheels. Color code red. Do not run in excess of 35,000 RPM.

The Dremel? EZ Lock? makes accessory changes easy as pull - twist - release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal.

The Dremel? EZ Lock? makes accessory changes easy as pull - twist - release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal.

Set contains mandrel, two 1/2 in felt polishing wheel, high-speed cutter, 1-1/4 in fiberglass-reinforced cut-off wheel, aluminum oxide grinding stone, silicon carbide grinding stone, mandrel, nylon brush, 36 409 15/16 in emery cut-off wheel, 1/2 in drum sander, 1/2 in coarse sanding band, polishing compound, two 1/2 in fine sanding band, two 1 in felt polishing wheel and storage box. Applications cutting, grinding, carving, engraving, shaping, sanding, cleaning and polishing.

The handy Dremel detailer's grip attachment is a quick and easy to use extra support for any rotary tool having a threaded nose piece. The detailer's grip transfers the weight of the tool to the palm of your hand for improved tool balance and control. Featuring soft grip on the handle for added comfort and an angled bottom to allow the user to get closer to the work, the detailer's grip is especially useful when you need to grip a rotary tool like a pencil for precise work during engraving, carving, etching and polishing applications.

Three attachments the chain saw sharpener, lawn mower sharpener and garden tool sharpener are included together in one kit for your convenience.

Turn your Dremel? rotary tool into a fast, efficient grout removal tool. Our carbide grout removal bit gives you just the right amount of power to clean out grout lines so you can replace damaged tiles or update your grout.

The 512E 320-grit abrasive buff is ideal for use on metal, glass, wood, aluminum and plastics and can easily remove tarnish from brass.

Improve the grip for bits in our rotary tool line with a genuine Dremel? collet set. With the 480, 481, 482, 483 collets, plus a quick-change collet nut, you can easily use a wide range of bits.

Sanding band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 rpm.

Get a 15/16 in Dia cut-off wheel made of a hard abrasive material that's used for slicing and cutting metal, including hardened steel. Our cut-off wheel makes it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws to allow for easy removal with a screwdriver.

This wheel for cutting and shaping on soft and hardwoods, fiberglass, plastics and laminates (not metal). This versatile wheel is coated with tungsten carbide grit for long life. It is coated on both sides, so it cuts and finishes in one operation.

One pair of motor brushes. For use with Dremel? rotary tool model(s) 100, 200, 275, 285, 300, 395 and 595 (Type 3, 4, 5 and 6). And Dremel? contour sander 6000 (Type 1 and 2).

Turn your Dremel? rotary tool into a simple-to-use rotary saw. Our 561 high-speed multi-purpose cutter gives you the power to easily cut wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. 1/8 in steel shank.

Get a drywall bit that makes fast, clean cuts. Our high-speed drywall cutting bit features a 1/8 in steel shank and a piloted tip for easy cutting around outlet and switch boxes. Ideal for cutting drywall for electrical boxes, air vents and other wall features.

The Multipurpose Cutting Kit allows for sturdy, controlled cuts in a variety of materials, including drywall, laminate, fiberglass, plastic and vinyl siding. And with its easy screw-on mounting system, you can install the Dremel? cutting kit in seconds. Kit includes a multi-purpose cutting guide, two drywall cutting bits and a multi-purpose cutting bit.

DREMEL 225-02 Flex Shaft Attachment, For: 400, 285, 275 and 800 Model Engravers Rotary Hobby Tool

Silicon carbide grinding stone are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.

Use this point for continuous duty or commercial work. Can also be used for decorative engraving. Use on steel, chrome, titanium, granite and other hard substrates. Use with Dremel? 290 (619.9319) engraver.

Shapes, smoothes or grinds especially hard materials such as hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 rpm.

Shapes, smoothes or grinds especially hard materials such as hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 rpm.

Our 1/4 in straight router bit makes routing, inlaying and mortising in wood and other soft materials simple. Designed to work with the Dremel 335 plunge router attachment and the 231 shaper/router table. Made of high-speed steel.

The 1 in felt polishing wheel is made to take a semi-rough finish and polish it to a smooth finish.

The DERMEL EZ lock makes accessory changes easy as pull twist release. The one-piece mandrel design simplifies the process of changing accessories, for use with the EZ402 EZ lock mandrel or standard 402 mandrel.

The 3/8 in felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics. Can be used with 421 polishing compound.

To be used with all cutting wheels, sanding discs and polishing wheels.

Dremel? 953 aluminum oxide grinding stone. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.

Turn your Dremel? rotary tool into a simple-to-use rotary grinder. Our 952 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.

A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.

Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.

Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.

Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.

Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.

Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.

Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 rpm.

This 110-piece accessory kit provides the organized storage of popular Dremel? accessories to perform a wide range of applications. This accessory set offers reusable storage bins and lift-out trays for easy organization of the included bits for cutting, grinding, polishing, sanding, cleaning and more. The kit consists of regular and heavy-duty cut off wheels, sanding bands, sandpaper discs, polishing compound, felt polishing wheels, aluminum oxide grinding stones, silicon carbide grinding stones, dressing stone, mandrels, wrench and a reusable carrying case with clear lid.

The 545 diamond wheel is completely coated with fine diamond particles for working with hard materials. Designed to be long-lasting and not lose its shape or break, it provides smooth, fine cuts. Great for cutting, sawing and carving of hard materials, such as marble, concrete, brick, porcelain, ceramics, hard epoxy and soft and hardwood.

Whether you're drilling, grinding or cutting, all sorts of hard-to-reach areas become instantly accessible with the Dremel 575 right angle attachment. The quick connect system makes it easy to attach the 575 to the Dremel rotary tool and the coupling system allows you to rotate the right angle drill attachment on the tool to achieve a perfect grip. Ball bearings and bevel gears provide smooth and cool operation.

Solid carbide bit removes wall and floor grout 3/8 in below the face surface. Compatible with 275, 285, 395, 381, 398 and 380.

This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.

Designed to flush-grind a surface. Domed shape and extra-thick reinforced aluminum oxide material allows the grinding wheel to be used on either its side or face for surface grinding, shaping, smoothing, deburring, rust removal sharpening and flush-grinding. Applications include extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Use with either EZ402 (SKU #482.4447).

For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).

For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).

For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).

The Dremel? EZ Lock? carbide cutting wheel makes accessory changes easy as pull twist-release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through wood and laminates. For use with the EZ402 EZ Lock? mandrel.

The Dremel? EZ Lock? makes accessory changes easy as pull - twist - release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through plastic.

The Dremel? EZ Lock? makes accessory changes easy as pull - twist - release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal.

The Dremel? EZ Lock makes accessory changes easy as pull, twist, release. The one-piece mandrel design simplifies the process of changing accessories and makes it easy to cut through a range of materials from metal to plastic. The EZ402 Mandrel is for use with exclusive EZ Lock Accessories.

Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed.

Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed.

Precision ground abrasive stone for quick, easy sharpening of chain saw blades.

Dremel? chain saw sharpening stone is for use with Dremel? chain saw sharpener attachment. This replacement stone provides an excellent cutting edge on the chain saw's cutting tooth. Having a sharp chain saw blade improves chain saw performance and safety.

Dremel? accessories are designed to be just what you need to complete projects. This grinding stone is for used to sharpen chain saw blades. For use with the Dremel? chain saw sharpening attachment.

The Dremel? 4000 variable-speed rotary tool kit offers the highest performance and most versatility of all Dremel? rotary tools. The increased strength of its motor and electronic feedback circuitry enables consistent performance at all speed levels. Ergonomics include a slim design that provides a 360 deg grip zone for added comfort and control. The Dremel? 4000 can use all existing Dremel? rotary tool accessories and attachments, as well as high-performance attachments, so you can do more with just one tool. 2 years warranty.

It's a drill press tool holder and flex shaft holder all-in-one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing and the telescoping flex shaft holder extends to any height between 16 and 29 in.

Turn your Dremel? rotary tool into a simple-to-use rotary grinder. Our 8193 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.

The Dremel sanding drum mandrel holds a sanding band covered with an aluminum oxide abrasive. Sanding bands used on the sanding drum mandrel are sold separately. 1/2 in bit diameter.

Get an engraving kit that does it all. This unique kit lets you engrave or decorate a wide variety of materials, including metal, plastic, glass, ceramic, wood and leather. Each Dremel? engraver kit includes a tool with a soft-grip body and variable stroke control so you can etch both fine lines and deep grooves. Also included is a replaceable carbide engraving point. By providing you with options that a stand-alone leather, wood or metal engraving kit can't, Dremel? gives you more ways to personalize your valuables.

Get the grout out and make re-grouting a breeze. With our grout removal attachment, you can turn your favorite Dremel? rotary tool into a powerful, electric grout removal machine. Best of all, the attachment's unique shape keeps the bit at the ideal cutting angle and keeps it centered between the tiles.

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel.