Milwaukee Thunderbolt? Black oxide jobber length drill bits are designed for extreme durability and long life. The Thunderbolt? web features a thicker core than a standard drill bit to provide ultimate strength and protect against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. The 135 deg split point tip delivers a precision start and prevents walking for fast, accurate holes. Effective for drilling on curved surfaces, Milwaukee Thunderbolt? Black Oxide bits require less effort to drill through metal, wood and PVC and are highly recommended for use with portable drills.

For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 deg F. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. No center punch required, eliminates walking and can be re-sharpened. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.

New Precision Shear? Forstner bits feature a double-ground, razor-sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producing flawless flat bottom holes. This unique geometric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive Forstner bit designs produce small chips and dust that collect in the cutting area, increasing friction and heat, thus causing the bit to dull quickly. Those designs also create holes with rough edges that require sanding. In addition Precision Shear? Forstner bits has serrated edges.

The Milwaukee? Hole Dozer? hole saw features Rip Guard?, the strongest tooth form in the industry, backed by the Rip Guard? limited lifetime tooth break warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard? warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer? includes Plug Jack?, an all access slot design that allows for full access during plug removal. The Plug Jack? gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack? increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal quick-change arbors including 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100.

High-speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 deg split point on all bits above 1/8 in ; jobber length.

The Bosch SDS Plus Bulldog? Xtreme rotary hammer bit provides 4X life in concrete with rebar, due to its 100% full-carbide tip design and proprietary diffusion bonding technology. Diffusion bonding high-heat, high-pressure solid-state welding produces an incredibly strong bond. In internal tests, these bits delivered 4X life in concrete with rebar than a standard SDS Plus bit. The Bulldog? Xtreme bit provides 25% more holes per charge, with an upgraded variable flute design, four flutes transition to two flutes for fast dust removal. Its centric conical tip results in rounder holes for precision anchoring and it has a wear mark that helps to assure accuracy of the hole.

Bit is constructed of high-speed steel for excellent combination of strength, heat resistance and wear resistance; 135 deg split point reduces feed pressure and allows for easier penetration without work hardening. Can be used with screw extractors. Carded.

High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.

Featuring a heavy-duty, full-length, heat-treated shank for protection against bends and breaks, DeWALT? spade bits are equipped with high-performance cutting spurs for optimum hole finish. An extreme speed channel provides fast chip removal and a 1/4 in ball groove shank offer quick-change applications. A 1/4 in hex shank helps to prevent slippage and a hang hole enables easy storage and wire pulling.

Chrome vanadium steel heat treated at full length for extra sharpness and long life in woodworking applications. The spurred cutting head reduces splintering and ensures a smooth clean hole, wide flutes provide a fast continuous flow of chips.

Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes. Fits 3/8 in and larger drills and drill presses.

DEWALT Drill Bit Set, Number of Pieces: 14, Includes: (2) 1/16 in, (1) 5/64 in, (1) 3/32 in, (1) 7/64 in, (2) 1/8 in, (1) 9/64 in, (1) 5/32 in, (1) 3/16 in, (1) 7/32 in, (1) 1/4 in, (1) 5/16 in, (1) 3/8 in Drill Bits, TOUGH CASE Container

Bosch offers a full assortment of SDS-max? hammer steel points and chisels. Bosch brings constant innovation to concrete and masonry drilling with increased efficiency and higher durability. All Bosch chisels are manufactured with a proprietary heat-treated process.

New Precision Shear? Forstner bits feature a double-ground, razor-sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producing flawless flat bottom holes. This unique geometric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive Forstner bit designs produce small chips and dust that collect in the cutting area, increasing friction and heat, thus causing the bit to dull quickly. Those designs also create holes with rough edges that require sanding. In addition Precision Shear? Forstner bits has serrated edges.

Use with any chuck side drill 1/2 in and larger. Can be used as adaptor for Lenox Leader tool.

Black oxide treatment resists corrosion and helps prevent bit from rusting. 135 deg split point tip starts on contact. Cuts with less force. Reduced shank above 3/8 in allows the use of larger drill bits in a 3/8 in chuck. Rubber overmolded case protects kit if dropped. Tap and drill selection chart for convenient reference. Automatic indexing for easy bit access and identification. Removable cartridges, easy to carry bits from case to worksite. Sizes include 1/16 to 1/2 in in 1/64 in increments.

Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one hex key and two feed screws.

Carbide tipped for long life in tough applications. Centric tip ensures quick starts in concrete. Wear mark alerts user when tip wears beyond ANSI specification. Bit runs cooler thanks to improved flute design.

Bosch BlueGranite Turbo? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. This impact-rated bit has been redesigned with a hex shank and it is designed for use in today's higher torque hammer drills and impact drivers. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete.

The IRWIN? Wood & Metal Door Lock Installation Kit uses durable carbon hole saws to cut openings in interior and exterior wooden doors for installing lock and handle sets in four easy steps. With a self-centering jig adjustable for 2-3/4" and 2-3/8" backsets that fits all common door widths, it makes precisely installing a door handles and locksets in any blank door fast and simple.

The cobalt tungsten carbide tip is ideal for drilling porcelain tiles up to a scratch hardness of 8. Unique 4-face point grinding extends the drill bit life.

High-speed steel bit with single flute cutting edge for greater control through steps. Hex shank prevents slipping in drill chuck. SpeedPoint tip penetrates faster and prevents walking in applications such as drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates.

Backing plate is equipped with spring-loaded snap pins which lock into holes on the backing plate for positive efficient transmission of torque. It can be used in 1/2 in capacity drills and larger, arbor has a 5/8-18 thread. Pilot bit used in applications on wood and metal.

Tool-free operation with universal quick change for all brands of hole saws. No Adapters required, hollow shank for full pilot bit access and durable hardened steel construction. Fits all drill chucks 1/2 in and larger. Includes (1) large quick change arbor.

Carbon steel construction sleeve and body for durability and life. Lock-n-Load system for one-handed quick release. Jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. The 7/16 in quick change range now holds insert bits, magnetic for holding.

Shock-resistant tool steel has advanced hardening process.

High-speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16 in and above for better chuck grip. Jobbers length.

High-speed steel bit with single flute cutting edge for greater control through steps. Hex shank prevents slipping in drill chuck. SpeedPoint tip penetrates faster and prevents walking in applications such as drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates.

Carbide tipped for long life in tough applications. Centric tip ensures quick starts in concrete. Wear mark alerts user when tip wears beyond ANSI specification. Bit runs cooler thanks to improved flute design.

A convenient multi-purpose hole saw for general contractor cutting applications. Attached 7/16 in pass-through shank arbor is a time saver. Cutting depth is 1-1/2 in and requires 4-5/16 in pilot drill.

Heavy-duty circle cutter can produce precise circles in sheet metal, brass, copper, soft steel, aluminum, plastic, wood and composition materials.

Blue groove point and cutting edge for faster chip removal, double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.

Irwin Installer Bit, 3/8 in Dia, Flute Type: Wide, Shank Type: Cylinder, Quick Change Shank: Yes, Shank Diameter: 0.37 in, Point Angle: 82 deg, Steel, 18 in OAL, Cutting Direction: Clockwise, Applicable Materials: Metal Lath, Plaster, Wood, Suitable for: 39104, 39105, 39108ZR Power Drill

Bosch BlueGranite Turbo? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. This impact-rated bit has been redesigned with a hex shank and it is designed for use in today's higher torque hammer drills and impact drivers. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete.

The DeWALT? 14-piece Pilot Point? industrial cobalt drill bit set is designed for maximum speed and life in stainless steel and other hard metals. These bits features a pilot point and split point tip design that starts on contact and helping to reduce bit-walking for control. These bits are commonly used for drilling into stainless steel, angle iron, I-beams and other similar metals.

Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks.

High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated).

Blue-Groove point and cutting edge for faster chip removal, double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension, fits all standard quick change chucks. Includes one 3/8 in, 1/2 in, 5/8 in, 3/4 in, 1 in, 1-1/8 in, 1-1/2 in and case.

Bosch offers a full assortment of SDS-max? hammer steel points and chisels. Bosch brings constant innovation to concrete and masonry drilling with increased efficiency and higher durability. All Bosch chisels are manufactured with a proprietary heat-treated process.

With extreme speed channels for fast chip removal and heavy-duty shanks for durability, the DeWALT? features 6 commonly used spade drill bits to help you speed through a variety of tasks. Dual, precision-ground cutting edges deliver maximum speed and performance. Max Life corners preserve nail life. A 1/4 in ball groove shank is compatible with most drills.

Bosch BlueGranite Turbo? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. This impact-rated bit has been redesigned with a hex shank and it is designed for use in today's higher torque hammer drills and impact drivers. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete.

Milwaukee's right angle attachment allows contractors to drive screws and drill holes in tight, difficult work areas. This attachment is ideal for cordless drills and uses standard 1/4 in hex accessories. It has a durable all-metal housing and steel gears with ball bearing construction which allows this adapter to handle up to 235 in-lb of torque. The compact design measures only 2 in wide allowing it to fit in tight spaces where work is difficult to perform. The convenient quick change chuck accepts standard 1/4 in hex drive accessories.

Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one hex key and two feed screws.

Carbide tipped for long life in tough applications. Centric tip ensures quick starts in concrete. Wear mark alerts user when tip wears beyond ANSI specification. Bit runs cooler thanks to improved flute design.

Bosch offers a full assortment of SDS-max? hammer steel points and chisels. This SDS-max? flat chisel is highly durable and designed for extreme performance. The heat-treated steel construction provides strength and durability.

Constructed of M-42 8% cobalt high-speed steel for super abrasive resistance in tough metals. Bits have a 135 deg split point which reduces feed pressure for easier penetration. Includes (2) 1/16 in, (2) 5/64 in, 3/32 in, (2) 7/64 in, 1/8 in, (2) 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in, 3/8 in and (1) rubber-sided case with sliding latch for added security.

Bosch BlueGranite Turbo? Carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. This impact-rated bit has been redesigned with a hex shank and it is designed for use in today's higher torque hammer drills and impact drivers. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete.

Made in the USA, the Milwaukee Hole Dozer? hole saw features Rip Guard, the strongest tooth form in the industry, backed by the Rip Guard limited lifetime tooth break warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer? includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes.

Pilot point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough, no spin shank eliminates bit spinning in the chuck and tapered web to reduce breaking. Size markings are located above the shank to prevent wearing away. Includes one 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 11/64 in, 3/16 in, 13/64 in, 7/32 in, 15/64 in, 1/4 in, 17/64 in, 9/32 in, 19/64 in, 5/16 in, 21/64 in, 11/32 in, 23/64 in, 3/8 in, 25/64 in, 13/32 in, 27/64 in, 7/16 in, 29/64 in, 15/32 in, 31/64 in, 1/2 in and case.

Use with any chuck side drill 1/2 in and larger. Can be used as adaptor for Lenox Leader tool.

The 1/4 in Universal QUIK-LOK? Extension has an innovative design that fits all 1/4 in shanks - with or without a power groove. The unique design requires no tools to change out bits, making it fast and efficient.

The 1/4 in Universal QUIK-LOK? extension has an innovative design that fits all 1/4 in shanks - with or without a power-groove. The unique design requires no tools to change out bits, making it fast and efficient.

Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one hex key and two feed screws.

High-speed steel milled and precision ground to 82 deg for countersinking into most machinable materials such as iron, steel, soft metals, plastic or wood.

Variable depth gullets provide more efficient chip clearance, 4/6 variable pitch teeth for reduced noise and improved performance. Electron beam weld for stronger, longer lasting teeth.

Bosch carbide rotary hammer bits feature tips that stay sharper longer and deliver more holes within specification than competitive bits. Manufactured to ANSI specification B212.14. SDS-max? rotary hammer bits fit Bosch SDS-max? hammers and competitive SDS-max? drive hammers and Hilti? hammers using TE-Y and TE-FY shanks. Unrivaled power from solid carbide head with robust S-cutter design for added speed and life.

High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.

The Bosch SDS Plus Bulldog? Xtreme rotary hammer bit provides 4X life in concrete with rebar, due to its 100% full-carbide tip design and proprietary diffusion bonding technology. Diffusion bonding high-heat, high-pressure solid-state welding produces an incredibly strong bond. In internal tests, these bits delivered 4X life in concrete with rebar than a standard SDS Plus bit. The Bulldog? Xtreme bit provides 25% more holes per charge, with an upgraded variable flute design, four flutes transition to two flutes for fast dust removal. Its centric conical tip results in rounder holes for precision anchoring and it has a wear mark that helps to assure accuracy of the hole.

Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes. Fits 3/8 in and larger drills and drill presses.

Milwaukee Thunderbolt? black oxide jobber length drill bits are designed for extreme durability and long life. The Thunderbolt? web features a thicker core than a standard drill bit to provide ultimate strength and protect against side-load breakage. A specially designed parabolic flute form clears chips fast, while the 3-flat Secure-Grip shank holds the bit firmly in the drill chuck. The 135 deg split point tip delivers a precision start and prevents walking for fast, accurate holes. Effective for drilling on curved surfaces, Milwaukee Thunderbolt? black oxide bits require less effort to drill through metal, wood and PVC and are highly recommended for use with portable drills.

Featuring a heavy-duty, full-length, heat-treated shank for protection against bends and breaks, DeWALT? spade bits are equipped with high-performance cutting spurs for optimum hole finish. An extreme speed channel provides fast chip removal and a 1/4 in ball groove shank offer quick-change applications. A 1/4 in hex shank helps to prevent slippage and a hang hole enables easy storage and wire pulling.

Carbide tipped for long life in tough applications. Centric tip ensures quick starts in concrete. Wear mark alerts user when tip wears beyond ANSI specification. Bit runs cooler thanks to improved flute design.

Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Used in repetitive metal drilling with portable drills or stationary drill press. Jobber length.