Bi-metal with wavy universal toothing. Broad application spectrum for sheet metal up to 1/16 in, aluminum profile, copper pipes, wood, plasterboard and plastics. Wide, waisted shape for optimal cutting speed and good swarf removal.

Bi-metal with teeth set for all woods, plasterboard and plastic materials. Very clean cut and excellent work progress. Extremely robust, unaffected by nails in wood (up to approximately 3/16 in Dia), masonry. 2-9/16 in W x 2 in L. Wide shape for maximum cutting performance and long straight cuts.

Bi-metal with teeth set for all woods, plasterboard and plastic materials. Very clean cut and excellent work progress. Medium width, waisted shape for optimal cutting speed and good swarf removal. 1-3/8 in W x 2 in L. Extremely robust, unaffected by nails in wood (up to approximately 3/16 in Dia), masonry.

Bi-metal with teeth set for all woods, plasterboard and plastic materials. Very clean cut and excellent work progress. Medium width, waisted shape for optimal cutting speed and good swarf removal. 1-3/8 in W x 2 in L. Extremely robust, unaffected by nails in wood (up to approximately 3/16 in Dia), masonry.

Double-row Japanese toothing for all wood materials, plasterboard and soft plastics. For fast work progress and maximum precision. Extra wide shape for maximum cutting performance and long straight cuts.

Double-row Japanese toothing for all wood materials, plasterboard and soft plastics. For fast work progress and maximum precision. Extra wide shape for maximum cutting performance and long straight cuts.

Solid HSS saw blade with metal toothing for sheet metal up to approximately 1/16 in. Also for plastics, wood, glazing, compound, brass and bronze. Clean, narrow cutting line. Ideal cutting speed. Segmented, for working in corners and on edges without over cut. 3-3/8 in Dia blade.

Double-row Japanese toothing for all wood materials, plasterboard and soft plastics. For fast work progress and maximum precision. Extra wide shape for maximum cutting performance and long straight cuts.

Double-row Japanese toothing for all wood materials, plasterboard and soft plastics. For fast work progress and maximum precision. Extra wide shape for maximum cutting performance and long straight cuts.

Short version. For removal of stubborn paint, adhesive residue, carpet, tile, adhesive and under seal.

For removing grout, cutting and shaping plaster, porous concrete and masonry. For course grinding or rasping for aggressive material removal over larger areas. Universal accessory fits all tools. 3-1/8 in carbide grit semicircle grout removal and rasp.

For aggressive material removal of wood, tile adhesives, cement and mortar. For use with all brands of multi-purpose oscillating tools.

Low profile design gets into tight spots. High-density hook-and-loop attachment system holds accessories securely. Ideal for detail sanding jobs utilizing quick attach hook-and-loop sandpaper. For use with all brands of multi-purpose oscillating tools.

12 hook-and-loop sanding triangles including three 60G, three 80G, three 120G and three 240G. For use with most detail sanders and all brands of multi-purpose oscillating tools.

Adapter for Rockwell SoniCrafter hex interface model.

Designed to be compatible with all major oscillating tool brands, DeWALT oscillating sandpaper and sanding pads are ideal for sanding in corners and other hard-to-reach areas. Crafted for long life and fast material removal.

High-speed steel oscillating tool blade. For aggressive plunge cutting up 1-5/8 in D into wood, drywall and soft plastics. The precision ground, beveled tooth design. Abrasive surface on the backside allows for sanding/finishing rough cuts. Universal accessory fits all tools.

High speed steel oscillating tool blade. Efficient hybrid design for precise cutting and sawing in non-metal materials. Cuts plastic, PVC, wood and drywall materials. Universal accessory fits all tools.

High speed oscillating tool blade. For slicing, ripping or scraping soft materials and hardened adhesives. Universal accessory fits all tools.

For wide, aggressive plunge cutting up to 1-5/8 in wood, plastic, drywall, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Precision ground, beveled tooth design. Bi-metal with hardened teeth to cut non-ferrous metals. Universal accessory fits all tools.

For aggressive plunge cutting up to 1-5/8 in depth in wood, plastic, drywall, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Precision ground, beveled tooth design. Bi-metal with hardened teeth to cut non-ferrous metals. Universal accessory fits all tools.

For wide plunge cuts up to 1-5/8 in depth in wood, plastic, fiberglass, drywall, nails, non-ferrous metals, thin sheet metal and hardened fillers. Bi-metal with hardened teeth to cut non-ferrous metals. Universal accessory fits all tools.

For linear, plunge and flush cuts in a variety of materials such as thin wood, plastic, drywall, fiberglass, non-ferrous metals, thin sheet metal, hardened fillers and window glazing. Bi-metal with hardened teeth to cut non-ferrous metals. Universal accessory fits all tools.

Bi-metal with wavy universal toothing. Broad application spectrum for sheet metal up to 1/16 in, aluminum profile, copper pipes, wood, plasterboard and plastics. Wide, waisted shape for optimal cutting speed and good swarf removal.

Bi-metal with wavy universal toothing. Broad application spectrum for sheet metal up to 1/16 in, aluminum profile, copper pipes, wood, plasterboard and plastics. Wide, waisted shape for optimal cutting speed and good swarf removal.

Bi-metal with teeth set for all woods, plasterboard and plastic materials. Very clean cut and excellent work progress. Medium width, waisted shape for optimal cutting speed and good swarf removal. 1-3/8 in W x 2 in L. Extremely robust, unaffected by nails in wood (up to approximately 3/16 in Dia), masonry.

Bi-metal with wavy universal toothing. Broad application spectrum for sheet metal up to 1/16 in, aluminum profile, copper pipes, wood, plasterboard and plastics. Wide, waisted shape for optimal cutting speed and good swarf removal.

Bi-metal with wavy universal toothing. Broad application spectrum for sheet metal up to 1/16 in, aluminum profile, copper pipes, wood, plasterboard and plastics. Wide, waisted shape for optimal cutting speed and good swarf removal.

Bi-metal with wavy universal toothing. Broad application spectrum for sheet metal up to 1/16 in, aluminum profile, copper pipes, wood, plasterboard and plastics. Wide, waisted shape for optimal cutting speed and good swarf removal.

Double-row Japanese toothing for all wood materials, plasterboard and soft plastics. For fast work progress and maximum precision. Extra wide shape for maximum cutting performance and long straight cuts.

For removing grout from floor or wall tiles for replacement or restoration. Use with all brands of multi-purpose oscillating tools.

For removing deep penetrating adhesive, caulking, silicone and other soft bonding materials up to 3 in deep. For use with all brands of multi-purpose oscillating tools.

Rigid scraper blade for removal of vinyl flooring, bonded carpeting, old coats of varnish/paint and adhesives. Flexible scraper blade for removal of caulk, coats of peeling paint and soft adhesives. For use with all brands of multi-purpose oscillating tools.

For plunge cuts and flush cuts in nails, nail-embedded wood, copper, aluminum, other non-ferrous metals, mild steel, wood, plastic, drywall and other soft materials up to 2-1/4 in deep. 5X the durability of regular bi-metal blades. For use with all brands of Multi-Purpose oscillating tools.

For continuous cutting in wood, drywall, plastic, copper, aluminum, other non-ferrous metals, and other soft materials. Use with all brands of multi-purpose oscillating tools.

Bi-metal 1-3/8 in blade for plunge cuts and flush cuts in nails, nail-embedded wood, copper, aluminum, other non-ferrous metals, mild steel, wood, plastic, drywall and other soft materials up to 1-9/16 in deep. For use with all brands of multi-purpose oscillating tools.

15 TPI coarse tooth blade for fast plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 2-1/4 in deep. For use with all brands of Multi-Purpose Oscillating tools.

For plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 1-9/16 in deep. Use with all brands of multi-purpose oscillating tools.

Aggressive flush cuts and plunge cuts in wood, plastic, drywall and other soft materials up to 1-9/16 in deep. Beveled tooth design for maximum blade durability and versatility. Special design creates cleaner, more accurate flush cuts. For use with all brands of Multi-purpose oscillating tools.

3/8 in, 3/4 in and 1-1/4 in flush cut (e-cut) blades for plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 1-9/16 in deep. For use with all brands of multi-purpose oscillating tools.

With carbide edging for aggressive material removal, DeWALT? oscillating grout removal blades are compatible with all major oscillating tool brands. No Adapter required.

With carbide edging for aggressive material removal, DeWALT? oscillating grout removal blades are compatible with all major oscillating tool brands. No Adapter required.

Featuring UNIVERSAL FITMENT? for Adapter-free use with all major oscillating tool brands, DeWALT? oscillating blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.

Featuring UNIVERSAL FITMENT? for Adapter-free use with all major oscillating tool brands, DeWALT? oscillating blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.

Featuring UNIVERSAL FITMENT? for Adapter-free use with all major oscillating tool brands, DeWALT? oscillating blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.

Featuring UNIVERSAL FITMENT? for Adapter-free use with all major oscillating tool brands, DeWALT? oscillating blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.

Featuring UNIVERSAL FITMENT? for Adapter-free use with all major oscillating tool brands, DeWALT? oscillating blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.

Featuring UNIVERSAL FITMENT? for Adapter-free use with all major oscillating tool brands, DeWALT? oscillating blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.

Featuring UNIVERSAL FITMENT? for Adapter-free use with all major oscillating tool brands, DeWALT? oscillating blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.

Featuring UNIVERSAL FITMENT? for Adapter-free use with all major oscillating tool brands, DeWALT? oscillating blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.

Featuring UNIVERSAL FITMENT? for Adapter-free use with all major oscillating tool brands, DeWALT? oscillating blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.

Featuring UNIVERSAL FITMENT? for Adapter-free use with all major oscillating tool brands, DeWALT? oscillating blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.

For removal of defective tile grout. Also for cutting slots in plaster, porous concrete and similar construction materials and for cleaning and reworking planked deck joints. Not suitable for very hard epoxy or cement grouts. The economical alternative to diamond blades. Ideal for working in corners and on edges without over cut. Kerf approximately 3/32 in.

High-speed steel. Multi-purpose Xbit is contractor rated. For use on spiral saws.

Carbide zip bit for ceramic wall tile, cement board, stucco and plaster. Ideal for cutting material up to 1 in thick. High-speed steel.

Features same door face profile as the No Lip bit, but this tool also provides a handy finger pull shape along the edge of the door. Can be used it on all four edges of the door or combined with the "No Lip" bit if the finger pull shape is only desired on certain edges.

Flush cut blades are used to make precise cuts to allow for installation of flooring or wall trim. The MM480 blade allows cutting the width of a 2 x 4 and may be used on wood, plastic, drywall and other soft materials. Carbon steel for high-performance applications.

The Dremel? MM482 Wood and metal flush cut blade is ideal for cutting doorjambs and baseboards for flooring installation. Used for precise cuts and plunge cuts, its wide 1-1/4 in blade speeds through long cuts and can make plunge cuts up to 1-5/8 in deep. Designed for cutting wood, drywall, plastic and soft metal like copper and 6d-8d finishing nails. The blade's tooth pattern similar to a standard hacksaw blade.

The Dremel? MM485 carbide flush cutting blade is the first oscillating cutting blade with high-performance carbide teeth. Now users can cut hardwoods, nails, screws, stainless steel bolts, galvanized pipe, plaster and lathe, cement board, fiber board, sheet metal, slate, ceramic wall tile and more. Its wide 1-1/4 in. blade speeds through long cuts and can make plunge cuts up to 1-11/16 in deep. Universal quick fit? system allows this blade to fit nearly every oscillating tool on the market.

The Dremel? MM485 carbide flush cutting blade is the first oscillating cutting blade with high-performance carbide teeth. Now users can cut hardwoods, nails, screws, stainless steel bolts, galvanized pipe, plaster and lathe, cement board, fiber board, sheet metal, slate, ceramic wall tile and more. Its wide 1-1/4 in. blade speeds through long cuts and can make plunge cuts up to 1-11/16 in deep. Universal quick fit? system allows this blade to fit nearly every oscillating tool on the market.

The fast-cutting drywall jab saw offers the excellent solution for cutting drywall. Designed to make both straight and curved cuts, The drywall jab saw's offset design and sharpened tip allow plunge cutting with no pilot hole needed.

The multi-knife is the ideal solution for cutting flexible materials with your multi-max oscillating tool. Designed to cut when being pulled or pushed, the multi-knife makes quick cuts in a variety of materials.

Oscillating saw blade. Universal fit system adapts to other brands. 3-1/8 in carbide grit for oscillating tools. Use to remove grout, porous concrete and masonry. Semicircle shape with flat side allow for easy access into corners and flush against adjoining surfaces.

Cuts all composition materials, plywood, hardwoods and softwoods. Use on handheld and table-mounted portable routers. Overall diameter 1-1/2 in. Overall length 2-1/2 in.

Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Cove and bead bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.

Extra strong rail and stile joints with a unique lock in the stile and rail joint, plus significantly more gluing surface. No other set on the market provides this feature.

3-piece premier adjustable cabinet bit set. Designed to be used on 5/8 to 1-1/4 in stock. Includes attractive wooden storage box. Cuts all composition materials, plywood, hardwoods and softwoods. Use on table-mounted portable routers with 1/2 in shank.

Quick Fit hook and loop pad accessory allows multi-max oscillating tools to accept sand papers and diamond paper.

3-piece premier adjustable cabinet bit set. Designed to be used on 5/8 in to 1-1/4 in stock. Includes attractive wooden storage box. Cuts all composition materials, plywood, hardwoods and softwoods. Use on table-mounted portable routers with 1/2 in shank.

Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.

Fein Profile Grinding Set, Includes: Holder with 6 Different Profile Inserts, V-shape, Trapezoid Shape, Straight Shape, Large Convex Shape (large), Small Concave, Convex Shape, Grits 80, 120, 180, (5) Sanding Sheet

Creates a uniform chamfer on the edge of any workpiece to add character, while retaining crisp geometric lines.

Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.

Adjustable, produces perfect fitting rail and stile doors from 5/8 to 1-1/4 in stock. Premier adjustable rail and stile router bit system, carbide tipped, anti-kickback router bits that are computer balanced, cuts all composition materials, plywood, hardwood and softwoods. Use on table mounted portable routers.

Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. No 18-106, 3/16 in large radius. No 18-108, 1/4 in large radius.

Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.

Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.

Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.

Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.

Designed to cut deep or shallow ``V" grooves. Bits are used for sign making or for adding decorative accents to furniture and plaques. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.

Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.

Adjustable, produces perfect fitting rail and stile doors from 5/8 to 1-1/4 in stock. Premier adjustable rail and stile router bit system, carbide tipped, anti-kickback router bits that are computer balanced, cuts all composition materials, plywood, hardwood and softwoods. Use on table mounted portable routers.

Slotting cutter arbors will work with any slotting cutter with a 5/16 in arbor. Use on hand held and table mounted portable routers.

Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. V-groove bit is used for cutting grooves in a variety of applications. The fully hardened and tempered steel shank provides ultimate durability.

These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a excellent finish.

Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Rabbeting bit can be used for joining boards or for letting in back panels. The fully hardened and tempered steel shank provides ultimate durability.

Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.

Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.

Forms a single bead with a square shoulder. Commonly used to match moldings in historic homes. Cuts all composition materials, plywood, hardwood and soft wood.

For joining wood edge to edge or end to end. Produces a joint that is stronger than the wood itself. Tips on each side of the bit are offset, cutting twice as many fingers as you see tips on each side of the bit. Use on CNC and other automatic router as well as table mounted portable routers.

Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8 in depth on wood and soft plastics.

Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8 in depth on wood and soft plastics.

Includes (2) precision wood end cut blade for aggressive plunge cutting in wood, (2) standard wood end cut blade for general-purpose cutting and (2) bi-metal-metal/wood end cut blade for cutting up to 1-5/8 in depth on wood, plastics, drywall, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. 1-3/8 in blades. Universal fit system allow accessory to fit all major brand oscillating tools.

Adapts universal fit accessories to fit onto prior model Sonicrafter tool with hex interface. Universal fit system allow accessory to fit all major brand oscillating tools.

Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8 in depth on wood and soft plastics.

Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8 in depth on wood and soft plastics.

Rockwell Tool Blade, Applicable Materials: Drywall, Plastic, Wood, 1-1/8 in W, Suitable for: BLACK & DECKER, Bosch, CHANNELLOCK, Chicago Electric, Craftsman, Dremel, Fein, Genesis, Makita, MasterForce, MILWAUKEE, Performax, Porter Cable, Ryobi, Shop Series, Skil, Tool Shop, Worx, Includes: Free Spacer for Bosch and Dremel and Universal Upgrade Ring for Original Sonicrafter Hex Interface Models

For general-purpose plunge cutting up to 1-5/8 in depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools. Blade width of 1-3/8 in.

For general-purpose plunge cutting up to 1-5/8 in depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools. Blade width of 1-3/8 in.

For plunge cutting up to 3/4 in depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools.