This CSR single-speed hammer drill features a 7 A motor, delivering the power and durability you need for tough drilling applications. A cast metal gear housing helps dissipate heat from internal components for added durability. Selectable hammer drill and drill modes provide versatility for drilling into metal, wood, concrete, brick, block and other masonry materials. It offers a streamlined, overmolded body and pistol-grip handle for increase comfort and reduced user fatigue. A 2-finger locking trigger makes extended use more comfortable. An additional side handle provides more control in heavy applications and bind-up situations.

Powerful 6.0 amp motor, variable speed (0-3300 rpm). Hammer: 0-43,500 BPM. Lock-On button for extended use. Die-cast aluminum gear housing. 360?? assist handle. Includes: depth rod, auxiliary handle and chuck key.

The Bosch 11255VSR 1 in SDS-plus? Bulldog? Xtreme rotary hammer is a versatile, handy tool that features a robust 8 A motor. From anchoring to large material breaking, it gets the job done right the first time. Engineered in the tradition of legendary Bulldogs, this powerful hammer delivers 2 ft-lb of impact energy and 0 to 5800 no-load bpm, but it weighs just 6.7 lb. The multifunction mode selector allows users to easily select among three modes of operation rotary hammer, rotation only and hammer only. To optimize the chiseling angle, it has Vario-Lock? positioning that rotates and locks the chisel in one of 36 different positions. It is Bosch's PRO+GUARD? dust system, helping users move toward OSHA silica table one dust compliance. The hammer is designed with an ergonomic D-handle for comfort. It features a variable-speed reversing trigger for accurate bit starting and a Bosch-exclusive rotating brush plate, for equal power in forward and reverse. Busy pros with appreciate the tool's HammerHook, which allows the user to hang the tool on the job and the SDS-plus? system provides for tool-free bit changes.

The DWE5010 1/2 in single-speed hammer drill has a powerful motor to drive high-speed drilling in dual modes at the user's desired speed. Constructed with a lightweight design and two-finger, rubber trigger for user comfort.

The DWD520K 1/2 in VSR pistol grip hammer drill kit can be set to either drill or hammer drill mode for applying to masonry, wood or steel. Includes a two-speed range for high-speed drilling or torqueing. Soft-grip handle and two-finger trigger increases user's comfort and control.

Variable speed with 3-mode operation rotation only, hammering with rotation and hammering only, ergonomic D-shaped handle with rubberized soft grip, accepts SDS-PLUS bits, one touch sliding chuck, built-in torque limiter, 'No hammering when idling' function, extended service life of carbon brushes, recessed lock on button, 40 different bit angle settings. Rated at 7 A, impact energy is 2.7 ft/lb, no load rating is 0 to 4500 bpm, no load rating is 0 to 1100 rpm, capacity of 1 in for concrete, 1/2 in for steel, 1-1/4 in for wood, 16-7/8 in long, weighs 6.6 lb. Includes 1 rotary hammer, one 360 deg auxiliary handle, 1 depth gauge, 1 carrying case and 1 plastic tool case.

The Bosch 11264EVS 1-5/8 in SDS-max? combination hammer features a powerful 13 A motor and has a dual-mode selector for combination versatility rotary hammer or hammer-only mode. Providing 6-1/2 ft-lb of impact energy, the tool weighs only 15.2 lb for a top performance-to-weight ratio. The hammer has integral clutch that helps to minimize torque reaction. Concrete contractors will appreciate the production in drilling and chiseling applications. The hammer's 12-position Vario-Lock? helps to optimize chiseling angles. Bosch's Vibration Control? in the hammer mechanism and grip area provide improved user comfort. And with Constant Response? circuitry, users benefit from smooth starts and constant load under pressure.

Milwaukee? 5262-21 gives up to 40% faster drilling and 15% more life, even in the toughest applications. Designed for the toughest applications, the 1 in SDS-Plus D-handle Rotary Hammer lasts longer and drills faster than other tools in its class. With a powerful 8 A motor, it delivers 0 to 1620 rpm, 0 to 5860 bpm and 2.1 ft-lb of torque. You'll get great drilling speed without sacrificing the power needed to drill larger holes. At just 6.1 lb, this rotary hammer is easy-to-use and helps avoid user fatigue. A mechanical clutch protects the motor when the bit binds and three-mode operation offers maximum versatility. The kit includes a side handle, depth rod and carrying case.

The DW505 1/2 in VSR dual range hammer drill has a powerful motor to drive high-speed drilling in dual modes at the user's desired speed. Constructed with a lightweight design for easy handling and operating.

The DW511 1/2 in VSR single-speed hammer drill has a powerful motor to drive high-speed drilling in dual modes at the user's desired speed. Constructed with a lightweight design for easy handling and operating.

The Makita 5/8 in hammer drill deliver versatility and longer runtime to the jobsite. The HP1641K offers two-mode operation (rotation only or hammering with rotation) for multiple applications. The HP1641K is powered by a 6 A variable speed motor for the most demanding applications. Capacities include 5/8 in concrete, 1/2 in steel and 1-3/16 in wood, with a full 0 to 44,800 bpm. The HP1641K weighs only 4.3 lb with a soft-grip handle and recessed lock-on button for continuous use.

The most powerful single-speed hammer drill on the market, with up to 2X more durability. This practical 8 A, 1/2 in dual-mode hammer drill offers power and versatility for a variety of tough jobs, with an impressive 0 to 2800 rpm and 0 to 48000 bpm. Excellent engineering, an all metal gear case and a heavy-duty metal chuck make this twice as durable as the leading competitor while maintaining outstanding performance. The compact 11-1/2 in profile lets you work in tight spaces and the two modes accommodate drilling in wood, steel and plastic or hammer drilling in concrete. A removable 360 deg side handle helps you set the depth rod for preset hole drilling. overmolding ensures a surer, more comfortable grip and minimizes vibration and fatigue on the jobsite.

Our 1/2 in VSR two-speed hammer drill delivers the power and durability to complete the toughest drilling applications. It switches between hammer drill and drill modes to provide versatility for drilling into metal, wood, concrete, brick, block and many other materials. The two-speed transmission delivers maximum torque in setting 1 and maximum speed in setting 2. A streamlined overmold handle allows for increased comfort and reduced user fatigue.