Features same door face profile as the No Lip bit, but this tool also provides a handy finger pull shape along the edge of the door. Can be used it on all four edges of the door or combined with the "No Lip" bit if the finger pull shape is only desired on certain edges.
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
For joining wood edge to edge or end to end. Produces a joint that is stronger than the wood itself. Tips on each side of the bit are offset, cutting twice as many fingers as you see tips on each side of the bit. Use on CNC and other automatic router as well as table mounted portable routers.
Produces locking miter joints. Run one board vertically and run the piece to be joined horizontally. Cuts all composition materials, plywood, hardwood and softwood. Use on CNC and other automatic routers as well as table mounted portable routers.
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hardwood and softwood. Use on portable routers for template work.
Forms a strong joint between the sides and front of a drawer. Drawer fronts are formed horizontally, flat on table surface. Drawer sides are formed vertically against the fence of the table. Cuts all composite materials, plywood, hardwood and softwood.
Raised panel bits with back cutter to produce panels from 3/4 in stock that are flush with the door frame for a professional look. Finished doors can be sanded with a wide belt sander or drum sander for easiest finishing. Shims are included to allow adjustments of the tongue thickness from 7/32 to 1/4 in. Cuts all composition materials, plywood, hardwood and soft wood. Use on table mounted portable routers.
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia.
Provides a stronger joint by increasing the surface area for glue. Plane boards to a uniform thickness, align bit to the center of the board, then reverse each board for the glue joint. Cuts all composition materials, plywood, hardwood and softwood. Use on CNC and other automatic routers as well as table mounted portable routers.
Design combines two small wings that cut downward to shear the top edge for a splinter-free surface and two large wings that shear upward for a smooth finish. Produces raised panels for doors and paneling. Use 1/2 in H for 5/8 in stock. Use 5/8 in height for 3/4 in stock. Cuts all composite materials, plywood, hardwood and soft wood. Use on table mounted portable routers.
Raised panel bits with back cutter to produce panels from 3/4 in stock that are flush with the door frame for a professional look. Finished doors can be sanded with a wide belt sander or drum sander for easiest finishing. Shims are included to allow adjustments of the tongue thickness from 7/32 to 1/4 in. Cuts all composition materials, plywood, hardwood and soft wood. Use on table mounted portable routers.
Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
Profile can be changed by changing the height of bit. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 3/8 in bearing Dia.
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia.
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia.
Revolutionary Quadra-Cut? design combines two small wings that cut downward to shear the top edge for a splinter-free surface and two large wings that shear upward for a smooth finish.
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia.
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hardwood and softwood. Use on portable routers for template work.
Produces perfectly fitted tongue and groove joints. Opposing shear angles of the tongue cutter ensures flawless finish. Adjustable for stock thickness of 1/2 in to 1-1/4 in and groove widths of 7/32 in to 3/8 in. Cut all composition materials, plywood, hardwood and softwood. Use on table mounted portable routers.
Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8 in bearing. Ground carbide with titanium for long life. Anti-kickback.
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia.
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
Top mounted bearings on bits make them ideal for lettering or other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywood, hardwood and soft wood. Use on portable or table mounted routers for template work.
Produces locking miter joints. Run one board vertically and run the piece to be joined horizontally. Cuts all composition materials, plywood, hardwood and softwood. Use on CNC and other automatic routers as well as table mounted portable routers.
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Double flute trim bit allows for a smoother finish. The fully hardened and tempered steel shank provides ultimate durability.
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
