The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Campbell Hausfeld 1/4 in NPT tee fitting (PA10400AV) can be used to run two air lines from an air compressor to power two air tools at once. Features a corrosion-resistant brass construction. 1/4 in MNPT x two 1/4 in FNPT.

Can be used with T, I/M and A Design 1/4 in plugs, eliminating confusion among designs. Deluxe push to-connect style makes coupling quick and easy. Heavy-duty brass or composite construction means longer life. Unique tubular valve design allows greater air flow, up to 35 cfm.

Can be used with T, I/M and A Design 1/4 in plugs, eliminating confusion among designs. Deluxe push to-connect style makes coupling quick and easy. Heavy-duty brass or composite construction means longer life. Unique tubular valve design allows greater air flow, up to 35 cfm.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

Tru-Flate Air Coupler, Industrial, Specifications: 3/8 in Connection, Inverted Male x MNPT Connection Type, Steel

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

Swivel design minimizes hose twisting for improved control. Corrosion-resistant steel. Pre-applied thread connections.

Bostitch Ball Drain Valve, Specifications: 1/4 in MNPT Connection

This plated, steel industrial Series plug is designed for strong connections. Thread sealant is pre-applied to prevent leakage. Depend on this industrial Series plug for durability.

This plated, steel industrial Series plug is designed for strong connections. Thread sealant is pre-applied to prevent leakage. Depend on this industrial Series plug for durability.

This plated, steel industrial Series plug is designed for strong connections. Thread sealant is pre-applied to prevent leakage. Depend on this industrial Series plug for durability.

This plated, steel industrial Series plug is designed for strong connections. Thread sealant is pre-applied to prevent leakage. Depend on this industrial Series plug for durability.

Brass fitting with 1/4 in MNPT and 1/4 in ID Dia. Use for air compressor hose fitting.

ProSource Air Hose End, 1/4 in Nominal, MNPT Connection, Brass, Brass, Brass, 3/8 in Diameter, Suitable for: Air Hose

Kit includes one 1/4 in MPT x barbed hose splicer for 3/8 in hose one barb x barb hose splicer for 3/8 in hose & three clamps.

ProSource Quick Coupler, Universal, Suitable for: For Air Tool and Air Compressor Hose Fitting

Contains 5-pcs: 3-piece 1/4 in MPT quick plug, 1-piece 1/4 in FPT quick plug and 1-piece 1/4 in NPT quick coupler.

This 1/4 in NTP female thread is tough and durable. It is designed for secure and balanced connections. Air-tight connections and plated steel construction makes it reliable for professional jobs.

This 1/4 in NTP male thread is tough and durable. It is designed for secure and balanced connections. Air-tight connections and plated steel construction makes it reliable for professional jobs.

ProSource Hose Plug, Universal, Suitable for: For Air Tool and Air Compressor Hose Fitting

ProSource Quick Coupler, Universal, Suitable for: For Air Tool and Air Compressor Hose Fitting

This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

ProSource Hose Plug, Universal, Suitable for: For Air Tool and Air Compressor Hose Fitting

This 1/4 in Series hose coupler kit is tough and durable. It is designed for secure and balanced connections. Air-tight connections and plated steel construction makes it reliable for professional jobs.

All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.

All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.

All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

Contains all parts necessary to repair a direct air line hose assembly. Each kit contains one single foot air chuck, 1/4 in female NPT, one male hose end 1/4 in ID hose x 1/4 in NPT, one hose splicer, 1/4 in ID hose, three band style hose clamps, fits 3/8 in ID hose.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.

This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.

This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot; however, it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.

This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.

This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

ProSource Air Hose Connector, Suitable for: For Air Compressor Hose Fitting

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

ProSource Air Line Connector, Suitable for: For Air Compressor Hose Fitting

All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.

All brass fitting with 3/8 in MNPT.

Eliminates kinked and twisted air line hose by swiveling a full 360 deg. Use on air lines, tools and compressor connections to increase flexibility and convenience. Barb type and male/female connections. 150 psi maximum working pressure.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.

This tire chuck can connect to an air compressor with an adapter and be used to fill tires with air. Depend on this tire chuck for strength and durability.