Contains all parts necessary to repair a direct air line hose assembly. Each kit contains one single foot air chuck, 1/4 in female NPT, one male hose end 1/4 in ID hose x 1/4 in NPT, one hose splicer, 1/4 in ID hose, three band style hose clamps, fits 3/8 in ID hose.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

Increased performance and yet still meets OSHA regulation 100-1 for 30 psi "dead head" pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy-duty die-cast body. Complete with hang-up hook and 1/4 in NPT female inlet. Inlet pressure of 150 psi.

Conforms to all Federal requirements related to OSHA, including noise level regulations. Tamperproof pressure reducers built into this gun limit nozzle pressure to 30 psi or less when used with listed inlet pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy-duty die-cast, epoxy finish body. Complete with hang-up hook and 1/4 in female NPT inlet.

Combination of a blowgun and the siphon spray nozzle. Barbed siphon inlet fits 1/4 in ID hose or tubing. Use for spray, cleaning engines, applying protective coating and more. Allows full line pressure to be used. Includes 1/4 in female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 psi.

Allows full line pressure to be used. Oil-resistant, soft replaceable rubber tip. Will not mar delicate surfaces. Gives a leakproof seal against oil passages, fuel lines and more. When air pressure is needed for cleaning.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.

This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.

This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot; however, it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.

This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.

This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

Iron Horse Air Compressor, Tool Only/Battery Included: Tool Only, 208/230 V, 6.5 hp, Tank Capacity: 60 gal, 150 psi, Air Flow Rate: 11.2 cfm, Iron, Dimensions: 27 in L x 20 in W x 65 in H

Amflo? Manual hose reels feature all-steel construction, comfortable handle grips and a spring tension brake to prevent accidental unwinding. Standard manual reels can be mounted horizontally or vertically and are available in three configurations assembled with hose and assembled or unassembled without hose to take up less space on the retail shelf. The dual output manual reel sits on the ground or can be conveniently nailed to the roof for maximum maneuverability. It is ideal for the construction site as it comes with 75 ft of lightweight polyurethane air hose. Manual hose reels are ideal for the economical shopper in the market for an air hose reel.

Rubber hose, durable, abrasion resistant.

ProSource Air Hose Connector, Suitable for: For Air Compressor Hose Fitting

Dual-action air sander 6 in pad a built-in silencer muffles noise as you work with this economical dual-action sander. It's a quality sander used for feather edging, metal preparation and finish work on body filler. Its dual-action pad motion produces swirl-free finishes.

The Ingersoll Rand oil-lubricated twin-stack reciprocating air compressor is designed to provide power, durability and portability on the jobsite or for DIY projects. From interior trim and finish to roofing and decking, the twin-stack can do the job. Built to last, the compressor features a durable cast-iron cylinder designed for the toughest 100% continuous-duty applications. The twin-stack compressor package comes standard with two 1/4 in universal couplers, front panel-mounted regulator and pressure gauge, 4 gal twin tanks, all season select lubricant and a power cord.

Quality rubber air hose. 300 psi. Comes with bonus blow gun kit. Use in garage, shop, industry or home. Includes safety blow gun, coupler and plugs, 5 different tips.

Vulcan Air Tool Accessory Kit, Brass/Steel, Brass/Chrome, Brass/Chrome, Includes: (1) Tapered Brass Inflator, (1) Inflation Needle, (2) 1/4 in Female Brass Plugs, (4) 1/4 in Male Brass Plugs, (1) Dual Tire Chuck, (1) Pencil Tire Gauge, (1) Brass Blow Gun, (1) Brass Safety Nozzle, (2) Male Brass Hose Connectors, (1) 1/4 in Quick Brass Coupler, (1) Air Blow Gun, (1) Female Brass Hose Connector

Adjustable fluid, air and spray pattern controls. Works in a variety of applications, from automotive refinishing to deck and fence work. Required force is 11 cfm and operating pressure is 50 psi. Includes one nozzle (size 1.4 mm) and one 20 1/4 oz plastic paint cup.

Tru-Flate? airline regulators employ a solid piston and balanced poppet for excellent performance and longer life. The solid piston design is reliable for a broad range of demanding applications and is impervious to a wide range of lubricating oils and greases. Unlike diaphragms, the solid piston resists rupture, cracking or tearing under pressure, constant flexing or high-cycle rates. It is impervious to most chemicals, provides accurate control and assures smooth, uninterrupted operation. Tru-Flate? airline regulators have fast reverse flow capabilities, allowing installation where dual pressures are required. Feature 2 ga ports and include pressure gauge and non-rising, locking knob adjustment. Maximum pressure 250 psi primary, 2 to 125 psi secondary.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

The 261 Series impact wrench is ideal for vehicle repair and heavy truck and machinery jobs where you will benefit from the square socket retaining ring and the power behind the vane motor. Trigger actuation and a power regulator let you complete projects with control and ease.

ProSource Air Line Connector, Suitable for: For Air Compressor Hose Fitting

Amflo? PVC air hose is ideal for general-purpose applications. It features a lightweight, flexible, kink-resistant design with bend restrictors. Its bright florescent colors reduce chances of tripping while on a jobsite.

Tru-Flate? airline regulators employ a solid piston and balanced poppet for excellent performance and longer life. The solid piston design is reliable for a broad range of demanding applications and is impervious to a wide range of lubricating oils and greases. Unlike diaphragms, the solid piston resists rupture, cracking or tearing under pressure, constant flexing or high-cycle rates. It is impervious to most chemicals, provides accurate control and assures smooth, uninterrupted operation. Tru-Flate? airline regulators have fast reverse flow capabilities, allowing installation where dual pressures are required. Feature 2 ga ports and include pressure gauge and non-rising, locking knob adjustment. Maximum pressure 250 psi primary, 2 to 125 psi secondary.

Designed for professionals and serious do-it-yourselfers, the versatile garage mate is ideal for the home, shop or jobsite. Delivering maximum air, the garage mate can power impact guns, ratchets, grinders, drills, nailers, paint sprayers, sanders and more. The garage mate features a cast-iron, oil-lubricated pump for solid, reliable performance. Belt-driven for quiet operation (75 to 80 dBA), all models are equipped with a pressure switch, pressure gauge, regulator, safety valve, manual drain and 6 ft power cord.

The advanced head design of the 1077XPA 1/2 in and 107XPA 3/8 in ratchet wrenches provide increased durability to one of the industry's most popular ratchets.

The 3017G is ideal for finishing. It offers a ball-bearing construction that is sturdy yet lightweight. Features include a 1/3 hp motor, a 1/4 in collet, a rear exhaust and a self-locking throttle. An ergonomic grip makes the tool comfortable to hold and use and provides exceptional torque accuracy. Offering longer life and higher free speed at 27,000 rpm. A general-purpose tool designed for cutting, polishing, porting, light weld grinding and breaking sharp edges.

Meets OSHA regulation 100-1 for 30 psi "dead head" pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy-duty die-cast body with hang-up hook, 1/4 in NPT female inlet and 4 in extension.

All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.

This set includes a 231G air impact wrench and a 170G air ratchet wrench along with a five-piece socket set. The impact wrench's 6-vane motor yields an optimal power to weight ratio, while the ratchet wrench's motor delivers 55 foot pounds of torque and 170 rpm of free speed. Both tools sport an ergonomic design for greater comfort. A blow molded storage case makes carrying the set easy.

Rubber hose, durable, abrasion resistant.

The ProSource tire inflator has a die-cast body and dial type gauge with rubber protector and it has a fitted single clip-on connector. There is an air pressure of 0 to 220 psi and an air inlet of 1/4 in NPT.

All brass fitting with 3/8 in MNPT.

Amflo? PVC air hose is ideal for general-purpose applications. It features a lightweight, flexible, kink-resistant design with bend restrictors. Its bright florescent colors reduce chances of tripping while on a jobsite.

The PC1010 is ultra-quiet and ultra-light lube less pump compressor.

Complies with all new tank standards. Includes chuck, 4 ft air hose, pressure gauge, manifold with safety and tank valve.

ProSource Air Inflation Kit, Brass/Steel, Brass/Silver, Brass/Nickel Plated, Includes: Inflation Adapter, Tapered Inflation Nozzle, Inflation Needle and Tire Nozzle

Ingersoll Rand's Edge Series 170G delivers the power you need to get the job done. At 55 ft-lb of maximum torque and 170 rpm free speed, this tool is the ideal fit for all of your projects. The 170G can be used in a broad range of applications where light disassembly and assembly of products is necessary. Use the 170G to access those hard-to-reach tight spaces.

6 in Random orbital air sander this vacuum-ready, low-vibration model is lightweight yet sturdy. It produces an ultra-high-quality, swirl-free, finish and connects to central or portable vacuum systems. The 300G extracts dust and particles through the pad, keeping foreign matter away from the motor. Virtually all dust is instantly channeled away from the work. This tool is well-suited for preparing metal and wood surfaces for painting and finishing.

Eliminates kinked and twisted air line hose by swiveling a full 360 deg. Use on air lines, tools and compressor connections to increase flexibility and convenience. Barb type and male/female connections. 150 psi maximum working pressure.

Prevents burn-out, stops rust and increases torque up to 25%. A compact oiler that fastens directly to the air tool. Precisely meters proper amount of oil to the tool only when the tool is in use. NO adjustments necessary 1/4 in male NPT outlet, 1/4 in female NPT inlet. Use on all 3/8 and 1/2 in air impact guns, air wrenches, body shop air tools and pneumatic hammers. Note: never use motor oil in pneumatic tool.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.

This tire chuck can connect to an air compressor with an adapter and be used to fill tires with air. Depend on this tire chuck for strength and durability.

Adjust from low air to a full volume flow. Recommended air pressure to 150 psi maximum. Knurled nozzle makes handling easy. Complete with handy pocket clip. Fits all industrial/Milton design 1/4 in coupler bodies.

Ingersoll Rand gas engine wheelbarrow air compressors are lightweight with a low-profile design providing maximum maneuverability on the jobsite. Built to last, these cast-iron, oil-lube compressors are designed for the toughest 100% continuous duty applications. The wheelbarrow compressor package includes pressure switch, regulator and gauge, two quick disconnects to power multiple tools and twin 8 gal capacity tanks. These gas-driven models are powered by an easy-starting 5.5 hp Honda or Kohler high-performance engine.

This standard-duty air hammer is handy whether you're cutting panels, fixing exhaust systems or making general repairs. Powered by compressed air, this tool delivers a 2-5/8 in stroke and 3500 bpm and is equipped with a quick-change retainer that makes it easy to swap chisels. Its rugged design sports an alloyed steel barrel and a heat-treated piston.

MAX Series air angle grinder the 3445MAX is the ideal choice for high-performance material removal. This 4-1/2 in air angle grinder combines a unique internal governor with a powerful 0.88 hp motor, to give you a best-in-class power to weight ratio grinder that will maximize your rate of material removal.

Our 150 psi 6 gal oil-free pancake compressor is constructed with a pancake style tank for stability, with a water drain valve and tough rubber feet. The high-pressure design optimizes air tool performance, delivering 2.6 scfm at 90 psi for quick recovery time. The oil-free pump provides maintenance-free performance. Transporting is easy with the integrated cord wrap.

Pressure rating of 0 to 200, 0 to 14 kg/sq-cm and mounting back.

With a great power to weight ratio the 2100G makes it comfortable to get the job done. Delivering 550 ft-lb of maximum reverse torque and weighing only 4.3 lb, this tool has what it takes to handle the toughest jobs. This powerful, lightweight Ingersoll Rand composite air impact wrench delivers high torque through a sophisticated power management system.

As close as you can get to the real racing tools used by Nascar pit crews. It features 625 ft-lb of torque in reverse, with 10,000 rpm to deliver pit crew power, speed and durability for shop tasks.