Round duplex receptacle floor box. Duplex cover with lift lids, 2-1/2 in bottom knockout, 18.5 cu-in capacity. Cast iron construction with gray powder coat finish for corrosion resistance. Suitable for carpet, tile or wood floor applications. Mop water tight. If floor covering is used, discard included brass tile flange and replace with Raco 6235 carpet flange. Includes box, brass duplex lift lid cover and brass tile flange. Receptacle not included. UL listed. 4.19 in Dia.
Raised gang box device cover used in finish wall applications to mount switches or receptacles. Raised 3/4 in for commercial wall applications. Additional keyholes allow device covers to also fit next smaller box (example: A 4-gang cover will fit a 3 or 4 gang box). 10-11/16 in x 4-1/2 in x 3/4 in.
The Carlon? SuperBlue? hard shell boxes combine the features of the hard shell thermoset box and the thermoplastic PVC style box to create a new rigid non-metallic wiring box. Molded out of specially formulated thermoplastic material, Carlon SuperBlue boxes are so strong they won't crack or break, even in extreme environments. So rigid, they resist flexing and hold their shape even under the worst conditions. They provide the largest wirefill capacity in their class and come with molded-in nailing flanges as well as molded-in clamps to make installation faster. Carlon SuperBlue boxes are lightweight, noncorrosive and nonconductive. They are designed to nest inside one another so they take up less shelf space and are easier to transport to job sites.
Non-metallic sheathed cable clamps. Ceiling box with 14 -1/4 in - 23-1/2 in adjustable bar hanger. Fixture spacing for 2-3/4 in and 3-1/2 in. 4 in Dia x 2-1/4 in D. Ground lug and screw. 6 integral clamps. Listed for fixture support up to 50 lb. UL listed, meets NEMA OS-2.
Hubbell Electrical Box, Cubic Capacity: 60 cu-in, Number of Gangs: 3, Number of Knockouts: 24, Knockout Size: (6) 1/2 in End, (4) 3/4 Inside, Cable Entry: Conduit, Galvanized Steel, Dimensions: 4-1/2 in L x 8-5/8 in W x 1-5/8 in D
For adding additional cubic capacity or as an outlet box for surface conduit. Twelve 1/2 in side knockouts, drawn metal, suitable for use in 2 hrs fire rated walls. 4 in square x 1-1/2 in D, 22.5 cu-in capacity. UL listed.
Single hole installation. Includes everything needed to install including a hole saw, solid brass cover and single gang grounded receptacle. Low voltage telephone/cable insert plate included. Includes blank plate for custom installation. Polycarbonate construction.
For multiple dead-end circuit terminations or where additional support is required in stub-up applications. Takes standard covers and accessories or devices. 18 cu-in capacity.
Carlon round floor boxes give you the same cost-saving advantages over metal boxes as our rectangular boxes. By letting you combine power, data and communications in the same box, you can dramatically reduce your installation time and cost compared to other non-metallic boxes. In addition, multi-use covers mean fewer SKUs to deal with and greater jobsite flexibility to increase your savings further.
Lightweight, noncorrosive and nonconductive, rigid, non-metallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85 in x 4.17 in. UL listed.
Lightweight, noncorrosive and nonconductive, rigid, non-metallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85 in x 2.41 in. UL listed.
Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability. 4 in Dia x 2-3/4 in width, 25 cu-in volume, two 1/2 in knockouts. Internal steel, stud/wood screws. Fixture rating 50 lb. UL listed for 2 hrs fire resistive walls and ceilings.
Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2 in to 1-3/8 in thick and ceiling substrates from 1/2 in to 1-5/32 in. Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 42 cu-in volume, two 1/2 in knockouts. Internal steel, stud/wood screws. 3-9/16 in D x 4 in W x 3-3/4 in H. UL listed for 2 hrs fire resistive walls.
Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2 in to 1-3/8 in thick and ceiling substrates from 1/2 in to 1-5/32 in. Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 23 cu-in volume, 1/2 in knockout. Internal steel, stud/wood screws. 3-9/16 in D x 2-1/4 in W x 3-3/4 in H. UL listed for 2 hrs fire resistive walls and ceilings.
Ceiling box with 14.38 to 22-1/2 in adjustable bar hanger. 4 in Dia x 2-1/4 in D. Fixture spacing for 2-3/4 and 3-1/2 in. Integral clamps. Listed for fixture support up to 50 lb. UL listed.
With non-metallic sheathed cable clamps. Two 1/2 in conduit knockouts and four cable knockouts (sides). Used to hang light fixtures between joists or structural members. Includes 4 in octagon box. Not designed for ceiling fan support. 10 lb maximum recommended support load. Furnished with 3/8 in - 18 NPS trade size fixture stud. Bar hanger is adjustable from 14-1/4 to 22-1/2 in. Box is adjustable along entire length of bar. Acceptable for use in 2 hrs fire rated walls. UL listed. UPC bar code. 1-1/2 in deep and 15.5 cu-in capacity.
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in pre-galvanized steel. 8-32 cover mounting screws assembled.
Conduit wiring system. Gangable switch box offers the option of constructing a box to hold two or more devices. Adjustable plaster ears allow box to be used in old work applications. Provided old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. Two 1/2 in bottom knockouts and two 1/2 in end knockouts. 2-1/2 in deep, 12.5 cu-in. UL listed.
The Carlon? SuperBlue? hard shell boxes combine the features of the hard shell thermoset box and the thermoplastic PVC style box to create a new rigid non-metallic wiring box. Molded out of specially formulated thermoplastic material, Carlon SuperBlue boxes are so strong they won't crack or break, even in extreme environments. So rigid, they resist flexing and hold their shape even under the worst conditions. They provide the largest wirefill capacity in their class and come with molded-in nailing flanges as well as molded-in clamps to make installation faster. Carlon SuperBlue boxes are lightweight, noncorrosive and nonconductive. They are designed to nest inside one another so they take up less shelf space and are easier to transport to job sites.
Four cable knockouts on the end. 3 in x 2 in x 1-1/2 in D. 7.5 cu-in. With clamps for non-metallic sheathed cable. Plaster ears allow the box to be used in old work applications. Acceptable for use in 2 hrs fire rated walls. UL listed.
Shallow switch box, made for use with furring strips and 1/4 in paneling. Welded, with non-metallic sheathed cable clamps. Two cable knockouts (end). One 1/2 in' conduit knockout (end). D bracket for wood or metal studs. 1/4 in bracket setback. 1 in D. 6.5 cu-in. UL listed.
The Carlon handy box is a non-metallic switch and outlet box specifically designed for use with non-metallic conduit systems and non-metallic sheathed cabling. Unlike metal boxes, the Carlon handy box has two integral cable clamps. These clamps hold non-metallic cable firmly in place without the need for separate clamps, simply push the wire into the clamp opening and the cable is held securely in place. The Carlon handy box also comes with six 1/2 in knockouts on the sides and back for easier wiring and a variety of mounting options.
For dead-end terminations where two devices or additional wiring capacity is required. Safe, non-conductive, will not rust or corrode. Integral mounting feet provide easy mounting. Type 2FSE. 32 cu-in capacity. UL listed.
Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed.
Thermoset fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 3 in x 4 in x 3-3/4 in. UL listed.
Raco Switch Box, Cable Entry: Conduit, Number of Knockouts: 13, Knockout Size: 1/2 in, Number of Gangs: 1, Square, Cubic Capacity: 21 cu-in, Dimensions: 4 in W x 1-1/2 in D x 4 in H, Steel, Gray, Galvanized, Flush Mounting
For conduit. 3 in x 2 in switch box. No bracket, adjustable plaster ears allow box to be used in old work applications. 14 cu-in capacity, 2-3/4 in deep, four 1/2 in side knockouts, two 1/2 in bottom knockouts and two 1/2 in end knockouts. Acceptable for use in 2 hrs rated fire walls. UL listed.
Thermoset fiberglass with ears, wing brackets, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 2-7/8 in x 5-15/16 in x 3-1/4 in. UL listed.
With captive nails. 3/0 - 4/0 combination. Fixture spacing for 2-3/4 to 3 in, six integral clamps. 4 in Dia non-metallic ceiling box, 20 cu-in volume. Listed for fixture support up to 50 lb. 4 in Dia x 2-1/4 in D. Meets NEMA OS-2, UL listed and RoHS compliance.
With captive nails and bracket support, twelve integral clamps, six each side. 44 cu-in capacity, 2-11/16 in D x 3-3/4 in x 5-5/8 in. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.
New work safe, non-conductive. With captive nails. Eight integral clamps, four each side. 32 cu-in. Meets NEMA OS-2, UL listed, classified for fire wall assemblies. 3 in D x 4 in x 3-3/4 in.
Raco RETRO-BRACE Fan Box, Number of Knockouts: 2, Cubic Capacity: 15.8 cu-in, Steel, 4.22 in W, 1-1/2 in D, 2.78 in H, Ceiling Mounting, Includes: Mounting Hardware
With mounting ears and swing bracket. 4 integral clamps, 2 each end. UL listed, meets NEMA OS-2. Suitable for masonry walls, not UL Classified for Fire Resistance. PVC construction. 20 cu-in capacity. 3-5/8 in D x 2-5/16 in x 4-1/8 in.
Round polycarbonate, 4 in Dia, 12.5 cu-in black non-metallic ceiling fan support saddle box, used in new work to mount a ceiling fan or heavy light fixture. Supports a 70 lb fan or 210 lb fixture. Saddle design straddles standard joist. Hands-free installation. 1/2 in setback. Two 1/2 in knock outs on the side. Four cable clamps, mounting hardware, instructions and high-strength, hardened screws included. 2 hrs fire rating, UL Orange Book. UL listed.
Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 16, Knockout Size: 1/2, 3/4 in, Number of Gangs: 2, Square, Cubic Capacity: 21 cu-in, Dimensions: 4 in W x 1-1/2 in D x 4 in H, Steel, Gray, Galvanized
Four inch round ceiling box with universal bar hanger, adjustable bar assembly from 16 to 24 in. 4 in Dia x 2-7/16 in D. Speed clamps, 50 lb. fixture rated. 2 hrs wall and ceiling fire rated, UL listed.
The Saf-T-Brace allows you to safely install a ceiling fan or light fixture without access to attic space and provides secure attachment to an existing ceiling joist. Ideal for installation during new construction or remodeling, the mounting brace can also be installed in finished ceilings through a hole large enough to fit the box. Each end of the Saf-T-Brace includes four teeth for an extra-strong grip and screws into joists independently for added security and stability. For added ease, the electrical box can be positioned anywhere on the brace to fit your project needs. The heavy-duty, 1-1/2 in, all-metal electrical box, with 15-1/2 in wiring capacity has dual mounting capability for lightweight or heavier fans and fixtures. For fixture support up to 150 lb on 16 in centers and up to 50 lb on 24 in centers. It is acceptable for fan support up to 70 lb.
Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section 314.29.
This Saf-T-Box allows you to safely and securely install a ceiling fan or light fixture during new construction or in locations with attic access. This heavy-duty, 1-1/2 in, all-metal electrical box, with 15.5 cu-in wiring capacity is UL listed to support fans up to 70 lb and light fixtures up to 150 lb. Featuring dual mounting capability, it includes 10 to 24 threads for heavier fans and fixtures and 8 to 32 threads for cover plates and lightweight lighting fixtures. The Saf-T-Box also includes a saf-t-cap to protect bolts and wires during drywall installation and painting.
Four cable knockouts (end). Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). "LB" bracket for wood studs, 5/8 in offset to clear narrow door molding. Face mounts on front edge of wood stud. Use when space between studs is limited. With clamps for non-metallic sheathed cable. 3 in x 2 in x 2-1/2 in D. 12.5 cu-in. UL listed.
Made of 16 ga steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish.
Made of 16 ga steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish.
Designed and listed for use with non-metallic sheathed cable. With mounting ears. Permissible for use with 90 deg C connectors. 8 cu-in capacity. 1-1/4 in x 2-3/8 in x 3-5/8 in. UL listed.
Non-conductive high impact lightweight PVC. Full 20 cu-in capacity. 6 integral clamps. 4 in Dia x 2-1/4 in D. Used for new work or renovations. Rated for fans up to 35 lb and fixture up to 50 lb. Mounts fan to a cross member secured between ceiling joist. Mounting screws included. UL listed.
Shallow ceiling fan outlet box with mounting screws. 1 integral clamp. Non-conductive high impact lightweight PVC. 5 knock outs, 8 cu-in capacity. For new work or renovations. Mounts ceiling fan securely to the ceiling joist. Rated for fans up to 35 lb and fixture up to 50 lb. 4 in Dia x 5/8 in D. UL listed.
Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 16, Knockout Size: 1/2, 3/4 in, Number of Gangs: 4, Cubic Capacity: 63.5 cu-in, Dimensions: 7-5/8 in H x 7-5/8 in W x 2-1/2 in D, Steel, Gray, Bracket Mounting, Suitable for: Switch
Drawn construction for surface mount applications. Conduit wiring system. Nine 1/2 in conduit knockouts (sides). Five 1/2 in conduit knockouts (bottom). TS brackets, for wood or metal studs. Gauging tabs and recessed nailing spur. 4 in square. 2-1/8 in deep, 30.3 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed.
Orbit Industries' handy boxes and extension rings mount on the surface of the wall and are used in the installation of switches, receptacles and other electrical devices. They are constructed from 16 ga galvanized steel. The welded, 1-7/8 in deep boxes include 1/2 in knockouts. Selected models include an FB bracket to mount on the flat side of the stud and an AB bracket to mount on the face and side of the stud.
Conduit wiring system. Welded, with conduit knockouts. Four 3/4 in and four 1 in conduit knockouts (sides). One 1/2 in conduit knockout and three TKOs (bottom). 4-11/16 in square x 2-1/8 in D. 42 cu-in. Installed in ceilings or walls for lighting fixtures or receptacles. UPC code. UL listed.
Raco Box Cover, Square, Number of Gangs: 1, Steel, Gray, 5/8 in L, 4 in W, 4 in H, Slot Mounting, Suitable for: Switch, 1.719 in Dia Receptacle, Includes: Hardware
Raco THE INSIDER Drawn Fan Box, Cable Entry: 1/2 in, Number of Knockouts: 5, Cubic Capacity: 6 cu-in, Round, Steel, 4-1/4 in W, 1/2 in D, 4.38 in H, Ceiling Mounting, Suitable for: Ceiling Fan, Ceiling or Wall Light Fixture, Includes: Mounting Hardware
Four cable knockouts (end). Two 1/2 in knockouts (end). With NMSC, non-metallic sheathed cable clamps. Old work clip. 3 in x 2 in x 2-1/2 in D, 12.5 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed.
Raco Square Box, Cable Entry: Conduit, Number of Knockouts: 17, Knockout Size: 1/2, 3/4 in, Number of Gangs: 2, Square, Cubic Capacity: 30.3 cu-in, Dimensions: 2 in L x 4.22 in W x 2 in H, Steel, Gray, Pre-Galvanized, Screw Mounting, Includes: (20) Switch Boxes
Raco Receptacle, Square, Hole Diameter: 2.141 in, Number of Gangs: 1, Steel, Galvanized, Silver, 0.563 in L, 4.69 in W, 4.69 in H, 2-9/64 in Dia, Surface Mounting, Suitable for: 30 to 50 A Receptacles, Includes: Captive Screws, Rounded Corners
Used to mount switch or receptacle on box in surface mount applications. Raised 1/2 in. For one 30 to 60 A, single receptacle 2-5/8 in Dia. 10.3 cu-in. UL listed.
Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in x 2-1/4 in x 1-7/8 in. UL listed.
Safe, non-metallic, non-conductive. Molded instructions. 12 integral clamps, 6 each side. Bracket and captive nails included. 2-1/2 in D x 3-7/10 in x 7-3/5 in.
With non-metallic sheathed cable clamps. Two 1/2 in conduit knockouts and four cable knockouts (sides). One 1/2 in conduit knockout (bottom). Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 lb maximum recommended static load. J side-mount bracket with spurs and holes for toe-nailing, for wood studs or joists. UPC bar code. UL listed.
Drawn construction and raised grounding provision for surface mount applications. Four 3/4 in knockouts (sides). Two 3/4 in knockouts (ends). One 3/4 in knockout (bottom). 4 in x 2 in x 1-7/8 in D. 13 cu-in capacity. UL listed.
With mounting ears and 2 swing clamps. Suitable for masonry walls, UL listed, not UL Classified for fire resistance. 2-3/4 in D x 3-1/8 in x 3-15/16 in.
Holding prong, box clip holds box in place for nailing. Design resists bending and twisting. With stud. Length 14-1/4 in thru 22-1/2 in. With locking tabs to hold bar in position. UL listed.
Fits Carlon single gang FS boxes. Paintable surface with textured finish to hide scratches. Stainless steel mounting screws and gasket included. UL, CSA listed.
Raco Welded Box with NMSC Clamp, Cable Entry: Knockout, Number of Knockouts: 4, Knockout Size: 1/2 in, 1/2 to 3/4 in, Number of Gangs: 2, Square, Cubic Capacity: 21 cu-in, Dimensions: 6.875 in H x 4.5 in W x 2.087 in D, Steel, Gray, Pre-Galvanized
With non-metallic sheathed cable clamps. Two 1/2 in conduit knockouts and four cable knockouts (sides). Used to hang light fixtures between joists or structural members. Includes 4 in octagon box. Not designed for ceiling fan support. 10 lb maximum recommended support load. Furnished with 3/8 in - 18 NPS fixture stud. Bar hanger is adjustable from 14-1/4 to 22-1/2 in. Box is adjustable along entire length of bar. Acceptable for use in 2 hrs fire rated walls. UL listed. UPC bar code.
Orbit Industries 2-1/2 in deep gangable switch boxes are used in the installation of switches. Orbit Industries includes a variety of gangable switch boxes with non-metallic cable clamps, metal clad cable clamps and old work tigergrips. The wide tigergrip design is a non-gangable, wide old-work switch box for easy installation of GFCI or other large devices. Use with a midi or oversized switch plate.
Extra large box. 6 clamps to hold cable, swing out clamps to hold to the wall. Engraved with NEC approved conductor fill. 13 in x 6-1/4 in x 8 in. UL listed.
Ceiling fan box with brace, 1-1/2 in deep, 15.8 cu-in box, for new work, to hang ceiling fans and light fixtures between joists or structural members safely and securely. Drawn construction. Maximum 70 lb fan or 90 lb fixture. Brace is adjustable form 16 to 24 in. Includes two end 1/2 in knockouts. Acceptable for use in 2 hrs fire rated walls and ceilings. UL listed.
